[SOLVED] Server 2016 Can't Add Server Roles. DISM errors. CBS Manifest Corruption: 21

[kazaz]

Hello Sysnative Support

I'm trying to add a Server Role to this server but it fails with error 0x800f0831.


sfc /scannow

Beginning system scan. This process will take some time.

Beginning verification phase of system scan.
Verification 100% complete.

Windows Resource Protection did not find any integrity violations.


Dism /Online /Cleanup-Image /RestoreHealth

Deployment Image Servicing and Management tool
Version: 10.0.14393.4169

Image Version: 10.0.14393.4169

[==========================100.0%==========================]
Error: 14

Not enough storage is available to complete this operation.

The DISM log file can be found at C:\Windows\Logs\DISM\dism.log




SFCFix by sysnative.com

Checking store directories . . .
Checking CBS.log . . .
Checking CheckSUR.log . . .
Checking CheckSUR.persist.log . . .

Due to the nature of your corruptions, scan times have been extended by
approximately 15-20 minutes. Please be patient and allow the operation to
complete.


Deployment Image Servicing and Management tool
Version: 10.0.14393.4169

Image Version: 10.0.14393.4169

[==========================100.0%==========================]
Error: 14

Not enough storage is available to complete this operation.

The DISM log file can be found at C:\Windows\Logs\DISM\dism.log



Can you guys help me out with this problem?

CBS File link : CBS.zip

 

[Maxstar]

Hi and welcome to Sysnative,

Step 1. Run SFCFix again with the attached ZIP file.
Warning: This fix was written specifically for this system. Do not run this fix on another system.

• Save any work you have open, and close all programs.
• Download the attachment SFCFix.zip and save it to your desktop.
• Drag the SFCFix.zip file over the SFCFix.exe executable and release it.

• SFCFix will launch, let it complete.
• Once done, a file will appear on your desktop, called SFCFix.txt.
• Post the logfile (SFCFix.txt) as attachment in your next reply.

Step 2. Reboot the system and run DISM and let me know the result.

DISM /online /cleanup-image /RestoreHealth

 

[kazaz]

Hi

Step 1 Ok

SFCFix.txt file is attached

Step2 Ok

Dism /Online /Cleanup-Image /RestoreHealth

Deployment Image Servicing and Management tool
Version: 10.0.14393.4169

Image Version: 10.0.14393.4169

[==========================100.0%==========================]
The operation comploted successfully

New error code 0x80073701

Please find my zipped new CBS folder attached and any help you can provide is greatly appreciated, thanks.

Best Regards

 

[Maxstar]

Hi,

Upload your COMPONENTS hive.

• Navigate to C:\Windows\System32\Config and locate the COMPONENTS file.
• Please copy this file to your desktop.
• Note: If you receive an error that this file is in-use, simply reboot your computer and try again.
• Right-click on this file on your desktop and select Send To > Compressed (zipped) folder. This will create a file named COMPONENTS.ZIP on your desktop.
• If the file is too large to upload here, upload the file to www.wetransfer.com and post the link in your next reply.

 

[kazaz]

Thank you

COMPONENTS.zip file is attached

 

[Maxstar]

Hi,

Follow these instructions to remove an update.

• Open the Start menu of Windows and type the command CMD
• When you see Command Prompt on the list, right-click on it and select Run as administrator.
• When command prompt opens, copy and paste the following command into it, then press enter.

wusa /uninstall /KB:4598243

• Let me know if it says it was successful or if there are any errors. Or take a screenshot of the command prompt window and paste it into your next reply.

 

[kazaz]

Hi,

Uninstall KB4598243

a new window opened and the process was very short

 

[Maxstar]

Download the

Farbar Recovery Scan Tool and save it to your Desktop:

Download the 64 bit version: - Farbar Recovery Scan Tool Link

• Open the startmenu and type the command cmd.
• After you find the Command Prompt, right click on it and select Run as Administrator.
• Copy and paste the following into the Command Prompt and press enter.

reg load HKLM\COMPONENTS C:\WINDOWS\SYSTEM32\CONFIG\COMPONENTS

Right-click on the file FRST64.exe and choose Run as administrator.

• Copy and paste the following (code) into the Search box and click the Search Registry button.

KB4598243

• When the scan is complete, a message will display that SearchReg.txt is saved in the same folder FRST was started from.
• Post the logfile SearchReg.txt as attachment in your next reply.

 

[kazaz]

Hi,

SearchReg.zip file is attached

 

[Maxstar]

Start the

Farbar Recovery Scan Tool again.

Warning: This script was written specifically for this system. Do not run this script on another system.

• Download the attachment fixlist.txt and save it to your desktop.
• Right-click on FRST.exe and select "Run as administrator".
• Press the Fix button.
• If for some reason the tool needs a restart, please make sure you let the system restart normally.
• When finished, a log called Fixlog.txt will appear in the same directory the tool is run from.
• Post the logfile Fixlog.txt as attachment in your next reply.

 

[kazaz]

Hi,

Fixlog.zip file is attached

 

[Maxstar]

Please run the following DISM command again, and let me know the result.

DISM /online /cleanup-image /RestoreHealth

 

[kazaz]

Hi,

DISM /online /cleanup-image /RestoreHealth

Microsoft Windows [Version 10.0.14393]
(c) 2016 Microsoft Corporation. All rights reserved.

C:\Windows\system32>DISM /online /cleanup-image /RestoreHealth

Deployment Image Servicing and Management tool
Version: 10.0.14393.4169

Image Version: 10.0.14393.4169

[==========================100.0%==========================] The restore operation completed successfully.
The operation completed successfully.

C:\Windows\system32>



New CBS folder is attached


Best Regards

 

[Maxstar]

Please perform a new registry search with FRST.

Start the

Command Prompt as administrator.

• Open the startmenu and type the command cmd.
• After you find the Command Prompt, right click on it and select Run as Administrator.
• Copy and paste the following into the Command Prompt and press enter.

reg load HKLM\COMPONENTS C:\WINDOWS\SYSTEM32\CONFIG\COMPONENTS

2.Right-click on the file

FRST.exe and choose Run as administrator.

• Copy and paste the following (code) into the Search box and click the Search Registry button.

KB4048953

• When the scan is complete, a message will display that SearchReg.txt is saved in the same folder FRST was started from.
• Post the logfile SearchReg.txt as attachment in your next reply.

 

[kazaz]

Hi,

SearchReg.zip file is attached

 

[Maxstar]

Start the

Farbar Recovery Scan Tool again.

Warning: This script was written specifically for this system. Do not run this script on another system.

• Download the attachment fixlist.txt and save it to your desktop.
• Right-click on FRST.exe and select "Run as administrator".
• Press the Fix button.
• If for some reason the tool needs a restart, please make sure you let the system restart normally.
• When finished, a log called Fixlog.txt will appear in the same directory the tool is run from.
• Post the logfile Fixlog.txt as attachment in your next reply.

 

[kazaz]

Hi,

Fixlog.zip file is attached

 

[Maxstar]

Hi,

I'm trying to add a Server Role to this server but it fails with error 0x800f0831

Please try to add the Server Role and let me know the result.

 

[kazaz]

Many thanks for your help Maxstar


Best Regards

 

[Maxstar]

Your welcome. Glad to hear that it's working fine now.
I'll mark this thread as solved!