Restart issue

MichaelAverage

MichaelAverage

Member
Joined
Mar 6, 2019
Posts
13
Hey guys,

My pc is completely fine, can run for hours stressing CPU and GPU but every time i reset it, it hangs in this boot loop, my keyboard does not light up, my monitor does not turn on and my motherboard is showing me B1 and B2 right before it resets.
There is easy bypass for this, i need to power off my PC while in loop by holding the power button and next starts is everything fine again.

Here is my HW
NVMe SSD: Samsung 950 Pro 512gb
Mobo: Rampage IV Gene
CPU: E5 2680 v2
GPU: 1070

My bios is latest version, This PC wasnt doing this when it had 970 in and when i was using normal SSD.
Any ideas why this is happening and how to get rid of it? i want to OC my CPU but this reset causes BIOS to think it wasnt valid OC, because it hands after Bios reset.
 
softwaremaniac said:
Hi!
Any external devices plugged in?
Click to expand...
Hey, just a mice, USB headphones
Few monitors, couple of USBs, Mice, keyboard, webcam, normal stuff.

Just tested it without NVME, and with only one memmory, and than with the other memmory in different slot, in all cases it still does that
 
I did refresh on this PC friday, i took parts off of my secound PC and combined them in to this rig. Also i bought a new ones, and PSU is one of the new ones, Its Corsair RM550x.
In rebuild i added Samsung 950 Pro 512gb in to a rig, i switched cases, swap 970 for 1070 and swapped Corsair rams for Kingston ones. All this parts are from my secound PC and were in every day use for the past 5 years with no issues what so ever. I start to belive my Motherboard is not connected properly, maybe power switches? i dont know
 
hey, i found what it was. It was my RAM, OCing it would cause this issue, and stock clocks are doing it too, but if i set them to 1600mhz manualy its okey, so i guess one is slower than the other and that does problems on windows start
 

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top