[SOLVED] Registry and files errors with 2019 server

[Bigpappakane]

I had a drive fill up on a 2019 server and have seen file issues in the log from kb5029247 update and some registry issues. Could you take a look and see if it's possible to fix. Any help appreciated! Thanks!

Edit:
The error I'm getting on cumulative update 2024-04 is 0x800703f1. Also can't install 4.8 NET because of registry corruption.

 

[Maxstar]

Hi and welcome to sysnative,

Upload the SCHEMA.DAT file

• Navigate to C:\Windows\System32\SMI\Store\Machine and copy the SCHEMA.DAT file to your desktop.
• Right-click on this file on your desktop and select Send To > Compressed (zipped) folder. This will create a file named SCHEMA.ZIP on your desktop.
• Attach this ZIP-file to your next reply.

 

[Bigpappakane]

Here you go. Thanks!

 

[Maxstar]

Hi,

Step 1. Replace the SCHEMA.DAT file
Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

• Download the attached Schema.zip file and save it to your desktop, right-click on it and select Extract all.
• Navigate to C:\Windows\System32\SMI\Store\Machine and rename the SCHEMA.DAT file to SCHEMA.old
• Copy the SCHEMA.DAT file on your desktop into the above directory.

Step 2. Download

SFCFix and save it to your desktop.

Warning: This fix was written specifically for this system. Do not run this fix on another system.

• Save any work you have open, and close all programs.
• Download the attachment SFCFix.zip and save it to your desktop.
• Drag the SFCFix.zip file over the SFCFix.exe executable and release it.

• SFCFix will launch, let it complete.
• Once done, a file will appear on your desktop, called SFCFix.txt.
• Post the logfile (SFCFix.txt) as attachment in your next reply.

Step 3. Run the following DISM command and post the result. If it fails attach a new copy of the CBS log.

DISM /online /cleanup-image /RestoreHealth

 

[Bigpappakane]

This seemed to have fixed it. Thank you so much!

 

[Maxstar]

Hi,

You're welcome. If there are no remaining issues we can mark this thread as solved...