program stopped working

[are]

Hi
run the program and program stopped working

i try sfc /scannow but finish %29

Beginning verification phase of system scan.
Verification 29% complete.

Windows Resource Protection could not perform the requested operation.

What can ı do?

 

[are]

C:\WINDOWS\system32>DISM.exe /Online /Cleanup-image /Scanhealth

Deployment Image Servicing and Management tool
Version: 10.0.17763.771

Image Version: 10.0.17763.973

[===========================61.3%=== ]
Error: 605

 

[are]

FRST Scan

 

[Sysnative Windows Update]

Hi!

Test your HDD:

GSmartControl
Follow the instructions below to check your SMART status with GSmartControl:

• Download the portable version of GSmartControl and save it on your Desktop;
• Extract the zip file to your Desktop. Open the folder gsmartcontrol-1.1.3-win64 which should be located on your Desktop and double-click gsmartcontrol.exe to launch the program.
• Identify your drive in the list (if recognized by the tool), and hover your mouse over it.
• You should see something called: SMART status. It will either read: Enabled, in which case you should do the following:
• Double-click on it to bring up its window (usually you'll find your drive by its size or its brand name);
• Go to the Self-Tests tab, then select Extended Self-test in the Test type drop-down list and click on Execute (this test can take a few hours to complete);
• Once the test is over, the results will be displayed at the bottom of the window. Please copy and paste these results in your next reply or take a screenshot;
• Also, go in the Attributes tab and if you have any entries highlighted in red or pink, take a screenshot of the GSmartControl window and attach it in your next reply;
• Please note: If the SMART Status reads: Unsupported, stop and let me know.
  
  

 

[are]

Hi!

Test your HDD:

GSmartControl
Follow the instructions below to check your SMART status with GSmartControl:

• Download the portable version of GSmartControl and save it on your Desktop;
• Extract the zip file to your Desktop. Open the folder gsmartcontrol-1.1.3-win64 which should be located on your Desktop and double-click gsmartcontrol.exe to launch the program.
• Identify your drive in the list (if recognized by the tool), and hover your mouse over it.
• You should see something called: SMART status. It will either read: Enabled, in which case you should do the following:
• Double-click on it to bring up its window (usually you'll find your drive by its size or its brand name);
• Go to the Self-Tests tab, then select Extended Self-test in the Test type drop-down list and click on Execute (this test can take a few hours to complete);
• Once the test is over, the results will be displayed at the bottom of the window. Please copy and paste these results in your next reply or take a screenshot;
• Also, go in the Attributes tab and if you have any entries highlighted in red or pink, take a screenshot of the GSmartControl window and attach it in your next reply;
• Please note: If the SMART Status reads: Unsupported, stop and let me know.
  
  

Hello

 

[Sysnative Windows Update]

Hi!

Please use the tool proposed.

 

[are]

Hi!

Please use the tool proposed.

Hi
No error

 

[Sysnative Windows Update]

Hi!

1. Download the Media Creation Tool and save this to your desktop. Go ahead and run this as well. Note: Click the Download tool now button when you get to this link.
2. Accept the License Agreement
3. Download the ISO file to your desktop.
4. Double-click on the ISO and then run the setup to try and upgrade your machine.

We want to get the ISO so that you don't have to keep downloading which can take hours.