Problems with DISM and SFC

Lazyluna678

Lazyluna678

Member
Joined
May 20, 2020
Posts
18
I've been trying to install Windows Update 2004 when I kept on getting the 0x800700c1 error. I proceeded to run a DISM and SFC scan, both of which had the WOF driver encounter a corrupt file in the compressed table. Please help me!
 
Hi!

GSmartControl
Follow the instructions below to check your SMART status with GSmartControl:


  • Download the portable version of GSmartControl and save it on your Desktop;
  • Extract the zip file to your Desktop. Open the folder gsmartcontrol-1.1.3-win64 which should be located on your Desktop and double-click gsmartcontrol.exe to launch the program.
  • Identify your drive in the list (if recognized by the tool), and hover your mouse over it.
  • You should see something called: SMART status. It will either read: Enabled, in which case you should do the following:
  • Double-click on it to bring up its window (usually you'll find your drive by its size or its brand name);
  • Go to the Self-Tests tab, then select Extended Self-test in the Test type drop-down list and click on Execute (this test can take a few hours to complete);
  • Once the test is over, the results will be displayed at the bottom of the window. Please copy and paste these results in your next reply or take a screenshot;
  • Also, go in the Attributes tab and if you have any entries highlighted in red or pink, take a screenshot of the GSmartControl window and attach it in your next reply;
  • Please note: If the SMART Status reads: Unsupported, stop and let me know.
    info_failing.png
 
Ok it is running I'll get back to you in 3 and a half hours
 

Attachments

  • 1589966487353.png
    1589966487353.png
    35.2 KB · Views: 4
1589997852780.pngSorry took way longer than I expected. Weirdly, it has come back without error. I'll be off my computer for 12 hours now but I will run any extra tests tomorrow. Also, all attributes are fine too
 
Please do the following:

SFC Scan


  1. Click on the Start button and in the search box, type Command Prompt
  2. When you see Command Prompt on the list, right-click on it and select Run as administrator
  3. When command prompt opens, copy and paste the following commands into it, press enter after each

    sfc /scannow

    Wait for this to finish before you continue

    copy %windir%\logs\cbs\cbs.log "%userprofile%\Desktop\cbs.txt"
  4. This will create a file, cbs.txt on your Desktop. Please attach this to your next post.
 
It's probably because I'm in the slow ring of the Insider program. I got the ISO from the Windows website
 
I would recommend that you reinstall the latest stable OS version. That is 1909 at the time of typing this, but there is a new version coming out today or tomorrow most likely.
 
Ok thank you, although I’m not sure it will work as it doesn’t seem to like the smaller updates at the moment. I’ll use an ISO if 2004 doesn’t work. Thanks for all your help :)
 
1591178488605.pngI have tried being in the insider program, out of the insider program, downloading from an ISO, downloading from Windows Assistant and downloading through windows update, and all of them show up with 0x800700c1. Can you see if you can help please?
 
You must log in or register to reply here.

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top