Old machine with windows 7 without sp1

[coloraut]

Hi, i try to update this machine, i reach the point that the command sfc don´t work and with the sfcfix i get the attach file

Thanks for all, and sorry for my english

 

[PeterJ]

Hello and welcome,

There is a poll included in this thread. Why is that or is it done by accident ?

Attach the file C:\Windows\Logs\CBS\CheckSUR.log to your next reply.

 

[coloraut]

Sorry , i don´t understand very well and when i try to publish the post the systems obligate me to make a poll?¿ . Sorry again, i attach the log.

Thanks

 

[PeterJ]

Sorry , i don´t understand very well and when i try to publish the post the systems obligate me to make a poll?

That is odd. I removed the poll as it is not needed.

Follow the instructions below please. If anything is unclear, just ask first.

WARNING! The following fix is specific to the user's system in this thread only. No one else should follow these instructions, as it could damage your system.

• Download the attachment SFCFix.zip and save it on your desktop.
• Save any work you have open, and close all programs.
• Drag the SFCFix.zip file over the SFCFix.exe executable and release it.
  
  
• SFCFix will launch, let it complete.
• Once done, a file will appear on your desktop, called SFCFix.txt.
• Attach that file to your next reply.

 

[coloraut]

Hi, thanks for your understanding , I attach the txt file

 

[PeterJ]

The log looks good.
Next step.

Provide the Components Hive
1. Navigate to C:\Windows\System32\Config and locate the COMPONENTS file.
2. Please copy this file to your desktop.
Note: If you receive an error that this file is in-use, simply reboot your computer and try again. Note: If you find that you need to reboot and are unable to because this is a server then try Option#2 below.
3. Right-click on this file on your desktop and select Send To...Compressed (zipped) folder. This will create a file named COMPONENTS.ZIP on your desktop.
4. The file will likely be too large to upload here so please upload to Gofile or WeTransfer and just provide the link here.

---

Option#2 (only if you are unable to follow the previous instructions)

• Please download the Freeware RegBak from here: Acelogix Software - Download products
  You will find it at the bottom of the page that the link brings you to.
• Go ahead and install this program and accept all the defaults. After the last install screen the program should open.
• Click the New Backup button. Accept the defaults and simply click Start.
• When it says Finished successfully, click the Close button.
• This will bring you back to the main screen of the program. You will see one entry in this list with the date that you did it. Right-click on this line-item and select Explore Backup...
• This will bring you into the folder where the backup was made. You should see a Users folder and a Windows folder along with a couple other files. Double-click on the Windows folder to open it. Then open the System32 folder and then config folder. You should see around 6 files in here, one of which is named COMPONENTS.
• Copy the COMPONENTS file to your Desktop. If the COMPONENTS file does not exist, please fetch it instead from C:\Windows\System32\config\COMPONENTS.
• Now right-click on the COMPONENTS file that is on your desktop and select Send to > Compressed (zipped) folder.
• Then please upload the zip file (COMPONENTS.zip) to your favourite file sharing website (it will be too big to upload here). Examples of services to upload to are Gofile or One Drive or WeTransfer and then just provide the link in your reply.
• You can close any open windows you have as well as the RegBak program now.

 

[coloraut]

Hi , the link is :

components.zip

Thanks

 

[PeterJ]

Warning: This script was written specifically for this user, for use on that particular machine. Do not run this script on another machine.

1. Download the Farbar Recovery Scan Tool and save it to your Desktop:
   64-bit: Downloading Farbar Recovery Scan Tool
   Note: Your antivirus program may report FRST incorrectly as an infection. If so, disable the real-time protection when downloading and running FRST.
   
   
2. Download the attachment fixlist.txt and save it to your desktop.
3. Right-click on FRST64.exe and select "Run as administrator".
4. Press the Fix button.
5. The tool will now process fixlist.txt.
6. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
7. When finished, a log called Fixlog.txt will appear in the same directory the tool is run from.
8. Attach the logfile Fixlog.txt to your next reply.

 

[coloraut]

I attach the file, the fix don´t need restart

 

[PeterJ]

Great.
Follow the instructions below to run a new scan with the System Update Readiness Tool (SURT) and provide a log.

1. Download SURT for your system. (Windows 7 SP1 x64)
2. Once downloaded, execute the installer, and go through the installation (this process can take around 15-20 minutes).
3. On completion, a log will be created in C:\Windows\Logs\CBS\CheckSUR.log.
4. Attach this log to your next reply.

Alternatively, if these instructions are unclear for you, you can follow the tutorial below.
System Update Readiness Tool (SURT)

 

[coloraut]

Hi, i attach the log.

 

[PeterJ]

Step 1:
WARNING! The following fix is specific to the user's system in this thread only. No one else should follow these instructions, as it could damage your system.

• Download the attachment SFCFix.zip and save it on your desktop.
• Save any work you have open, and close all programs.
• Drag the SFCFix.zip file over the SFCFix.exe executable and release it.
  
  
• SFCFix will launch, let it complete.
• Once done, a file will appear on your desktop, called SFCFix.txt.
• Open the file, then copy and paste its content in your next reply.

Step 2:
Restart the computer.
Check Windows Update again and report the result.
If it fails, attach the zipped cbs.log to your next reply.

 

[coloraut]

SFCFix version 3.0.2.1 by niemiro.
Start time: 2022-08-20 15:46:48.419
Microsoft Windows 7 - amd64
Using .zip script file at C:\Users\usuario\Desktop\SFCFix.zip [0]




PowerCopy::
Successfully took permissions for file or folder C:\Windows\servicing\packages\Package_for_KB2454826~31bf3856ad364e35~amd64~~6.1.2.0.cat
Successfully took permissions for file or folder C:\Windows\servicing\packages\Package_for_KB2454826~31bf3856ad364e35~amd64~~6.1.2.0.mum

Successfully copied file C:\Users\usuario\AppData\Local\niemiro\Archive\Package_for_KB2454826~31bf3856ad364e35~amd64~~6.1.2.0.cat to C:\Windows\servicing\packages\Package_for_KB2454826~31bf3856ad364e35~amd64~~6.1.2.0.cat.
Successfully copied file C:\Users\usuario\AppData\Local\niemiro\Archive\Package_for_KB2454826~31bf3856ad364e35~amd64~~6.1.2.0.mum to C:\Windows\servicing\packages\Package_for_KB2454826~31bf3856ad364e35~amd64~~6.1.2.0.mum.

Successfully restored ownership for C:\Windows\servicing\packages\Package_for_KB2454826~31bf3856ad364e35~amd64~~6.1.2.0.cat
Successfully restored permissions on C:\Windows\servicing\packages\Package_for_KB2454826~31bf3856ad364e35~amd64~~6.1.2.0.cat
Successfully restored ownership for C:\Windows\servicing\packages\Package_for_KB2454826~31bf3856ad364e35~amd64~~6.1.2.0.mum
Successfully restored permissions on C:\Windows\servicing\packages\Package_for_KB2454826~31bf3856ad364e35~amd64~~6.1.2.0.mum
PowerCopy:: directive completed successfully.




Successfully processed all directives.
SFCFix version 3.0.2.1 by niemiro has completed.
Currently storing 19 datablocks.
Finish time: 2022-08-20 15:46:49.589
Script hash: 2/FEbPXtoOSGJEcxMstJ0799YyiQ4OFq7WY1IzHg8PA=
----------------------EOF-----------------------




I attach the log zipped

 

[PeterJ]

Did you restart the machine as requested in step 2 ?

 

[coloraut]

Yes, sorry i don give you this information

 

[PeterJ]

Boot your computer into a Clean Boot state following these instructions: How to perform a clean boot in Windows.
After that, check Windows Update again and report the result.

 

[coloraut]

The machine has windows 7 , i used the safe mode with network compatibility but windows update don´t open

 

[PeterJ]

Copy following files to your desktop:
C:\Windows\Logs\CBS\cbs.log
C:\Windows\WindowsUpdate.log
Zip the copied files and attach them to your next reply.

 

[coloraut]

i attach the zip file with the two archives

 

[PeterJ]

Step 1:
WARNING! The following fix is specific to the user's system in this thread only. No one else should follow these instructions, as it could damage your system.

• Download the attachment SFCFix.zip and save it on your desktop.
• Save any work you have open, and close all programs.
• Drag the SFCFix.zip file over the SFCFix.exe executable and release it.
  
  
• SFCFix will launch, let it complete.
• Once done, a file will appear on your desktop, called SFCFix.txt.
• Open the file, then copy and paste its content in your next reply.

Step 2:

• Run the System Update Readiness Tool (SURT) again.
• Download SURT for your system. (Windows 7 SP1 x64)
• Once downloaded, execute the installer, and go through the installation (this process can take around 15-20 minutes).
• On completion, attach the log located at C:\Windows\Logs\CBS\CheckSUR.log in your next reply.