MEMORY_MANAGEMENT D1

M

maki

Member
Joined
Jul 5, 2015
Posts
271
The correct BSOD reason cannot be read if MiniDump is set.
After adding the DUMP file to the debugger (Windbg), it can't determine which driver caused the error, it always shows Process: taskhost.
Although my system is integral and functional.
BSOD can occur today, or in a month or two months, and again several times.
MEMORY_MANAGEMENT D1
is a complicated problem because the reason is not physical memory, because the expert has tested and never detected problems.
The new RAM doesn't solve any problems either.
I have 32 GB RAM and the full dump requires 48 GB + DUMP DISK size and then it will show the real process.
I don't have 48 GB of memory because I have a small SSD.

The problem is caused by the Chrome browser, BSOD always occurs only once a day, even when the computer works all the time.
This problem occurs when I have a lot of physical memory and the System does not have enough virtual memory.
The system automatically sets 16-30 GB pagefile.sys and no BSOD occurs.
But the system slows down.

32 GB RAM + 30 GB Virtual Memory (Auto) = 62 GB MEMORY

Memory increases when using pages with JavaScript - scrrol large page / wall = HIGH RAM (Facebook, Youtube)
 
Thanks for fedback

Can you learn how to read DUMP files yourself.
I would like to gain knowledge myself ...
There are many guides ... but commands are missing.
!analyze -v
this is a modest command, which are advanced commands.
At Microsoft a few years ago a specialist in public gave a long command, it was very good! the program downloaded a few-gigabyte data folder, it took a long time, but then EVERY (!) DUMP file was read correctly!

and these SRVs don't download all the data.
Please, know how to download this multi-gigabyte folder with various files?
 
I started collecting log, but each time the computer restarts before completion and shows BSOD.
Only this BSOD is strange. First it shows the blue screen and then there is no BSOD but the desktop with artifacts in the upper left corner!
Run again - the same problem...
 
Sterowniki tego urządzenia nie są zainstalowane. (Kod 28)

Nie został wybrany sterownik dla zestawu lub elementu informacji o urządzeniu.


Aby znaleźć sterownik dla tego urządzenia, kliknij opcję Aktualizuj sterownik.


(ERROR BSOD)

ACPI\PNP0A0A
*PNP0A0A

AND

ASMedia USB3.0 eXtensible Host Controller (Error BSOD)


AND

6.1.7601.17514 21-06-06 Microsoft (Error) miniport WAN (Error BSOD)
Wyłączono sterownik (usługę) dla tego urządzenia. Możliwe, że tę funkcję zapewnia sterownik alternatywny. (Kod 32)
Click to expand...
 
maki said:
At Microsoft a few years ago a specialist in public gave a long command, it was very good! the program downloaded a few-gigabyte data folder, it took a long time, but then EVERY (!) DUMP file was read correctly!

and these SRVs don't download all the data.
Please, know how to download this multi-gigabyte folder with various files?
Click to expand...
I suspect this command downloaded symbol installer files or packages. I've installed a couple of symbol installers for Windows 7, 8 and 10 a few years ago, I ended up with a symbols folder somewhere in the 70GB.

SRV allows you to point to the server where you want to download symbols from and it will download the symbols needed for you to look into the dump. It does not download all symbols because that's simply too much.
 
Google Translation:

Code: 
The drivers for this device are not installed. (Code 28)

No driver selected for the device information set or item.


To find a driver for this device, click Update Driver.


(ERROR BSOD)

ACPI \ PNP0A0A
* PNP0A0A

AND

ASMedia USB3.0 eXtensible Host Controller (Error BSOD)


AND

6.1.7601.17514 21-06-06 Microsoft (Error) miniport WAN (Error BSOD)
The driver (service) for this device has been disabled. It is possible that this feature is provided by an alternative driver. (Code 32)

Where did this message come from?

Could you please zip any files found in this directory:

Code: 
%systemroot%\Minidump
 
Shows two unknown devices, cannot find drivers.
I have all the drivers downloaded from the manufacturer's website ASUS.COM
Z97-PRO

Minidump 0 bytes / No files

Screen-Shot-06-24-20-at-06-42-PM.jpg
 
I have always used sfc /scannow and SFCFix and Windows Repair
Repair Reparse Poind
Not require reapir - ZERO ERRORS
Repair Environment Variables - ZERO ERROS
but it always shows that the system does not require repair.
ZERO ERRORS
The system is stable, does not freeze.
 
Microsoft Windows [Wersja 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. Wszelkie prawa zastrzeżone.

C:\Windows\system32>Dism /online /cleanup-image /restorehealth

Wersja narzędzia do obsługi obrazu wdrażania
i zarządzania nim: 6.1.7601.24499

Wersja obrazu: 6.1.7601.24499


Błąd: 87

Opcja restorehealth nie została rozpoznana w tym kontekście.
Więcej informacji można znaleźć w pomocy.

Plik dziennika narzędzia DISM można znaleźć w folderze C:\Windows\Logs\DISM\dism.log

C:\Windows\system32>
 

Attachments

For a long time there was no BSOD.
One driver cannot be installed fully.
After installation, "restarting computer required", except that it always asks after each startup my PC (infinite installation loop without success).

Code: 
na System zgodny ze standardem Microsoft ACPI
AMDA00 Interface
Vers. 1.0.1.0 17-03-14
ASUSTeK Computer Inc.

System Windows nie może zainicjować sterownika urządzenia dla tego sprzętu. (Kod 37)

Aby zmiany dokonane dla tego urządzenia zostały wprowadzone, musisz ponownie uruchomić komputer.

This is the only driver on the internet, there is no other.

Code: 
: Kontroler osadzony zwrócił dane mimo braku żądania danych. Być może system BIOS próbuje uzyskać dostęp do kontrolera osadzonego bez synchronizacji z systemem operacyjnym. Te dane zostaną zignorowane.
 

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top