LatencyMon - DPC & ISR High rates

[The Witcher Music]

Hey, Im a psytrance producer using Cubase , lately im struggled to use Cubase fluently, there is a massive pops and clicks when i press play on my project and trying to take a listen to what ive done, i have to mention that only when i open an heavy project with a lot of vsts it happens, hope you can hellp me out with it

Here are LatencyMon stats:

_________________________________________________________________________________________________________
CONCLUSION
_________________________________________________________________________________________________________
Your system appears to be having trouble handling real-time audio and other tasks. You are likely to experience buffer underruns appearing as drop outs, clicks or pops. One problem may be related to power management, disable CPU throttling settings in Control Panel and BIOS setup. Check for BIOS updates.
LatencyMon has been analyzing your system for 0:16:54 (h:mm:ss) on all processors.


_________________________________________________________________________________________________________
SYSTEM INFORMATION
_________________________________________________________________________________________________________
Computer name: THEWITCHER-ПК
OS version: Windows 7 Service Pack 1 , 6.1, build: 7601 (x64)
Hardware: ASUSTeK COMPUTER INC., B150M-K
CPU: GenuineIntel Intel(R) Core(TM) i5-6500 CPU @ 3.20GHz
Logical processors: 4
Processor groups: 1
RAM: 8092 MB total


_________________________________________________________________________________________________________
CPU SPEED
_________________________________________________________________________________________________________
Reported CPU speed: 3192 MHz

Note: reported execution times may be calculated based on a fixed reported CPU speed. Disable variable speed settings like Intel Speed Step and AMD Cool N Quiet in the BIOS setup for more accurate results.

WARNING: the CPU speed that was measured is only a fraction of the CPU speed reported. Your CPUs may be throttled back due to variable speed settings and thermal issues. It is suggested that you run a utility which reports your actual CPU frequency and temperature.



_________________________________________________________________________________________________________
MEASURED INTERRUPT TO USER PROCESS LATENCIES
_________________________________________________________________________________________________________
The interrupt to process latency reflects the measured interval that a usermode process needed to respond to a hardware request from the moment the interrupt service routine started execution. This includes the scheduling and execution of a DPC routine, the signaling of an event and the waking up of a usermode thread from an idle wait state in response to that event.

Highest measured interrupt to process latency (µs): 19883.102090
Average measured interrupt to process latency (µs): 5.430628

Highest measured interrupt to DPC latency (µs): 19880.535866
Average measured interrupt to DPC latency (µs): 2.816220


_________________________________________________________________________________________________________
REPORTED ISRs
_________________________________________________________________________________________________________
Interrupt service routines are routines installed by the OS and device drivers that execute in response to a hardware interrupt signal.

Highest ISR routine execution time (µs): 465.817043
Driver with highest ISR routine execution time: dxgkrnl.sys - DirectX Graphics Kernel, Microsoft Corporation

Highest reported total ISR routine time (%): 0.100221
Driver with highest ISR total time: dxgkrnl.sys - DirectX Graphics Kernel, Microsoft Corporation

Total time spent in ISRs (%) 0.119768

ISR count (execution time <250 µs): 1158857
ISR count (execution time 250-500 µs): 0
ISR count (execution time 500-999 µs): 1
ISR count (execution time 1000-1999 µs): 0
ISR count (execution time 2000-3999 µs): 0
ISR count (execution time >=4000 µs): 0


_________________________________________________________________________________________________________
REPORTED DPCs
_________________________________________________________________________________________________________
DPC routines are part of the interrupt servicing dispatch mechanism and disable the possibility for a process to utilize the CPU while it is interrupted until the DPC has finished execution.

Highest DPC routine execution time (µs): 450.935777
Driver with highest DPC routine execution time: iusb3xhc.sys - Intel(R) USB 3.0 eXtensible Host Controller Driver, Intel Corporation

Highest reported total DPC routine time (%): 0.549135
Driver with highest DPC total execution time: iusb3xhc.sys - Intel(R) USB 3.0 eXtensible Host Controller Driver, Intel Corporation

Total time spent in DPCs (%) 1.00470

DPC count (execution time <250 µs): 6374023
DPC count (execution time 250-500 µs): 0
DPC count (execution time 500-999 µs): 7
DPC count (execution time 1000-1999 µs): 0
DPC count (execution time 2000-3999 µs): 0
DPC count (execution time >=4000 µs): 0


_________________________________________________________________________________________________________
REPORTED HARD PAGEFAULTS
_________________________________________________________________________________________________________
Hard pagefaults are events that get triggered by making use of virtual memory that is not resident in RAM but backed by a memory mapped file on disk. The process of resolving the hard pagefault requires reading in the memory from disk while the process is interrupted and blocked from execution.

NOTE: some processes were hit by hard pagefaults. If these were programs producing audio, they are likely to interrupt the audio stream resulting in dropouts, clicks and pops. Check the Processes tab to see which programs were hit.

Process with highest pagefault count: chrome.exe

Total number of hard pagefaults 954
Hard pagefault count of hardest hit process: 430
Number of processes hit: 16


_________________________________________________________________________________________________________
PER CPU DATA
_________________________________________________________________________________________________________
CPU 0 Interrupt cycle time (s): 56.736648
CPU 0 ISR highest execution time (µs): 465.817043
CPU 0 ISR total execution time (s): 4.858040
CPU 0 ISR count: 1158858
CPU 0 DPC highest execution time (µs): 450.935777
CPU 0 DPC total execution time (s): 40.374247
CPU 0 DPC count: 6311856
_________________________________________________________________________________________________________
CPU 1 Interrupt cycle time (s): 3.863079
CPU 1 ISR highest execution time (µs): 0.0
CPU 1 ISR total execution time (s): 0.0
CPU 1 ISR count: 0
CPU 1 DPC highest execution time (µs): 108.651942
CPU 1 DPC total execution time (s): 0.070873
CPU 1 DPC count: 10555
_________________________________________________________________________________________________________
CPU 2 Interrupt cycle time (s): 5.190855
CPU 2 ISR highest execution time (µs): 0.0
CPU 2 ISR total execution time (s): 0.0
CPU 2 ISR count: 0
CPU 2 DPC highest execution time (µs): 113.865288
CPU 2 DPC total execution time (s): 0.066032
CPU 2 DPC count: 10838
_________________________________________________________________________________________________________
CPU 3 Interrupt cycle time (s): 4.991787
CPU 3 ISR highest execution time (µs): 0.0
CPU 3 ISR total execution time (s): 0.0
CPU 3 ISR count: 0
CPU 3 DPC highest execution time (µs): 135.400376
CPU 3 DPC total execution time (s): 0.241606
CPU 3 DPC count: 40781
_________________________________________________________________________________________________________

 

[Sysnative Windows Update]

Hello and welcome!

Please accept our apologies for this horrendous delay!

Are you still in need of assistance?