[SOLVED] KB4550947 cyclic installation Windows Server 2016 Standard

N

novikoff

Well-known member
Joined
Aug 18, 2021
Posts
52
Hello. Windows Server 2016 Standard has not been updated for a long time. At the moment, the KB4550947 update is being cycled, which is installed successfully, but then reappears in the list of necessary updates and so on in a circle. Further updates do not appear in the list at all.

SFC Results:
C:\Windows\system32>sfc /scannow
The system scan has started. This process may take some time.

The beginning of the verification stage when scanning the system.
The verification is 100% complete.

Windows Resource Protection did not detect any integrity violations.

DISM cannot restore components with error 0x800f081f. When specifying the W2016 distribution as the source, the same error 0x800f081f occurs.

DISM Results:

PS C:\Users\Администратор.WIN-FPFQITTP3OT> Dism /Online /Cleanup-Image /RestoreHealth
DISM System
Version: 10.0.14393.0
Image version: 10.0.14393.2457
[==========================100.0%==========================]
Error: 0x800f081f
The source files could not be found.
Specify the location of the files needed to restore the component using the "Source" parameter. For more information about specifying the source location, see the web page Cherry trees spring to life /?LinkId=243077.
The DISM log file is located at C:\Windows\Logs\DISM\dism.log

PS C:\Users\Администратор.WIN-FPFQITTP3OT> Dism /Online /Cleanup-Image /RestoreHealth /Source:"F:\sources\install.wim" /limitaccess
DISM System
Version: 10.0.14393.0
Image version: 10.0.14393.2457
[==========================100.0%==========================]
Error: 0x800f081f
The source files could not be found.
Specify the location of the files needed to restore the component using the "Source" parameter. For more information about specifying the source location, see the web page Cherry trees spring to life /?LinkId=243077.
The DISM log file is located at C:\Windows\Logs\DISM\dism.log

The ComponentsScanner results and the CBS archive are attached.

I hope you all can help.

Thank You.
 

Attachments

Hi,

Step 1. Download
6530fbb0f4101-56f31e53c97da-SFCFix.PNG
SFCFix and save it to your desktop.

Warning: This fix was written specifically for this system. Do not run this fix on another system.
  • Save any work you have open, and close all programs.
  • Download the attachment SFCFix.zip and save it to your desktop.
  • Drag the SFCFix.zip file over the SFCFix.exe executable and release it.
650c22f99662d-6190d993a26f3-SFCFix-Zip-Eng.gif

  • SFCFix will launch, let it complete.
  • Once done, a file will appear on your desktop, called SFCFix.txt.
  • Post the logfile (SFCFix.txt) as attachment in your next reply.


Step 2. Run the following DISM command and post the result. If it fails attach a new copy of the CBS log.
Code: 
DISM /online /cleanup-image /RestoreHealth
 

Attachments

Hi. SFCFix.txt attached.

DISM command completed successfully

C:\Users\Администратор.WIN-FPFQITTP3OT>DISM /online /cleanup-image /RestoreHealth
DISM System
Version: 10.0.14393.0
Image version: 10.0.14393.2457
[==========================100.0%==========================] The recovery was completed successfully.
The operation has been completed successfully.

Trying to install updates again?
 

Attachments

Yes, please attempt to update. If it fails attach a new copy of the CBS logs.
 
The same situation - offers the same updates again:

PowerShell 7.4.1
PS C:\Users\Администратор.WIN-FPFQITTP3OT> Get-WindowsUpdate

ComputerName Status KB Size Title
------------ ------ -- ---- -----
SERVUMK -D----- KB4550947 1GB Cumulative update for Windows Server 2016 for processor-based systems…
SERVUMK ------- KB2267602 933MB Updating the threat detection engine for Microsoft Defender Antivirus

PS C:\Users\Администратор.WIN-FPFQITTP3OT>

CBS archive are attached.
 

Attachments

The ZIP-file does not contain the latest CBS.log, only the older CbsPersist logs.
 
Export the Windows Update log
  • Right-click on the Start button and click Windows PowerShell (Admin).
  • Copy and paste the following command into it, press enter afterwards
Code: 
Get-WindowsUpdateLog
  • Wait for the message "WindowsUpdate.log written to C:\Users\<username>\Desktop\WindowsUpdate.log".
  • Attach the logfile WindowsUpdate.log to your next reply.
 
Please run the following command in an elevated prompt and copy the result in your next post.
Code: 
reg query "HKLM\Software\Policies\Microsoft\Windows\WindowsUpdate" /s
 
PS C:\Windows\System32> reg query "HKLM\Software\Policies\Microsoft\Windows\WindowsUpdate" /s

HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\WindowsUpdate\AU
AUOptions REG_DWORD 0x3
 
Run the following commands in an elevated prompt.
Code: 
net stop wuauserv
net stop bits
ren %systemroot%\SoftwareDistribution SoftwareDistribution.old
net start wuauserv
net start bits
Afterwards attempt to update again.
 
I did it. The update status has changed - there is no letter D

PS C:\Windows\System32> Get-WindowsUpdate

ComputerName Status KB Size Title
------------ ------ -- ---- -----
SERVUMK ------- KB4550947 1GB Cumulative update for Windows Server 2016 for processor-based systems…

PS C:\Windows\System32> Install-WindowsUpdate

Confirm
Are you sure you want to perform this action?
Performing the operation "(22.03.2024 15:47:02) Cumulative update for Windows Server 2016 for
processor-based systems x64, 2020 04 (KB4550947)[1GB]" on target "SERVUMK".
[Y] Yes [A] Yes to All [N] No [L] No to All Suspend [?] Help (default is "Y"): Y

X ComputerName Result KB Size Title
1 SERVUMK Accepted KB4550947 1GB Cumulative update for Windows Server 2016 for processor-based systems…
2 SERVUMK Downloaded KB4550947 1GB Cumulative update for Windows Server 2016 for processor-based systems…
3 SERVUMK Installed KB4550947 1GB Cumulative update for Windows Server 2016 for processor-based systems…

PS C:\Windows\System32> Get-WUHistory

ComputerName Operationname Result Date Title
SERVUMK Installation Succeeded 22.03.2024 12:47:21 Cumulative update for Windows Server 2016 for processor-based systems…

PS C:\Windows\System32> Get-WURebootStatus

ComputerName RebootRequired RebootScheduled

SERVUMK False

No reboot is required

PS C:\Windows\System32> Get-WindowsUpdate

ComputerName Status KB Size Title
SERVUMK -D----- KB4550947 1GB Cumulative update for Windows Server 2016 for processor-based systems…

And again, an update KB4550947 with the status D
 
Last edited by a moderator:
I've removed the strike through bbcode, perhaps you have hit that button?

Could you please post a screenshot of the Windows Update history from the settings screen.
 
Follow these instructions to install an update with DISM.
  • Open the Start menu of Windows and type CMD.
  • When you see Command Prompt on the list, select the option Run as administrator.
  • Copy and paste the following command into it, and press enter. (Leave the CMD window open!)
Code: 
MD C:\WUTemp
  • Now, download the following update (KB4556813) to: C:\WUTemp - Or copy this file from the download directory to C:\WUTemp. (Important!)
    Downloadlink: KB4556813
  • Copy and paste the following commands one at a time into the command prompt and press enter after each.
Code: 
CD C:\WUTemp
EXPAND.exe windows10.0-kb4556813-x64_074956aa9f895643ea0768d516375d4a1cd732a2.msu -f:* C:\WUTemp
DISM.exe /Online /Add-Package /PackagePath:C:\WUtemp\Windows10.0-KB4556813-x64.cab
  • Let me know if it says it was successful or if there are any errors. Or take a screenshot of the command prompt window and paste it into your next reply.
 
Screenshot attached

C:\Users\Администратор.WIN-FPFQITTP3OT>MD C:\WUTemp

C:\Users\Администратор.WIN-FPFQITTP3OT>CD C:\WUTemp

C:\WUTemp>EXPAND.exe windows10.0-kb4556813-x64_074956aa9f895643ea0768d516375d4a1cd732a2.msu -f:* C:\WUTemp
File Unpacking Utility Microsoft (R)
(c) Корпорация Майкрософт (Microsoft Corporation). All rights reserved.

Addendum C:\WUTemp\WSUSSCAN.cab to the unpacking queue
Addendum C:\WUTemp\Windows10.0-KB4556813-x64.cab to the unpacking queue
Addendum C:\WUTemp\Windows10.0-KB4556813-x64-pkgProperties.txt to the unpacking queue
Addendum C:\WUTemp\Windows10.0-KB4556813-x64.xml to the unpacking queue

Unpacking files ....
Progress: 1 of 4 files
The unpacking of the files is complete...
there are 4 files in total.

C:\WUTemp>DISM.exe /Online /Add-Package /PackagePath:C:\WUtemp\Windows10.0-KB4556813-x64.cab

The DISM system
Version: 10.0.14393.0

Image Version: 10.0.14393.2457

1 of 1 is being processed - Adding a package Package_for_RollupFix~31bf3856ad364e35~amd64~~14393.3686.1.6
[==========================100.0%==========================]

Error: 0x800f081e

The specified package is not applicable to this image.

The DISM log file is located at C:\Windows\Logs\DISM\dism.log

C:\WUTemp>
 

Attachments

  • 2024-03-22_16-50-42.png
    2024-03-22_16-50-42.png
    197.7 KB · Views: 1
You must log in or register to reply here.

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top