Issue updating Windows 7 Pro with error 800B0100

[ChrisHefner]

I have ran the SURT tool and the SFCFix from this site. The CBS logs show me that there are 70 corrupt packages, and then that no packages were available so it could not repair them. SFCFix identified the 70 issues, but could not repair them either. I am an IT Specialist, but this one is beyond me. This machine had some bad memory, but that issue has since been corrected. I'm hoping to avoid reloading this computer.

I've attached SFCFix.txt to this post, and am running the SFCFix Script to upload the CBS Logs, as the folder is about 50 MB, zipped. Thank you for your help.

 

[Go The Power]

Hello and welcome to the forum.

Can you please upload the following logs:
C:\Windows\Logs\CBS\CheckSUR.log
C:\Windows\Logs\CBS\CheckSUR.persist.log

 

[ChrisHefner]

View attachment CheckSUR.logView attachment CheckSUR.persist.log

Thanks for your help. I had tried uploading the entire CBS folder using the SFCFix tool as the folder was 50 MB, but I guess it never made it. After replacing the bad memory last week, the system seems stable; just hoping to get past the Windows Update corruption.

Thanks again.

 

[Go The Power]

SURT Package replacement

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

1. Click Here to download Packs.zip and save this to your Desktop.
2. Right-click on the file and select Extract All...
3. Tick the box labelled Show extracted files when complete then click Extract
4. A window will open showing two folders, Manifests and Packages
5. Open the Manifests folder and copy the files into the following folder (if there are any files)
   
   C:\Windows\Temp\CheckSur\Winsxs\Manifests
   
6. Open the Packages folder and copy the files into the following folder (if there are any files)
   
   C:\Windows\Temp\CheckSur\Servicing\Packages
   
7. Run the System Update Readiness Tool (SURT) again.
8. When the SURT finishes installing, copy (Ctrl + C) and paste (Ctrl + V) the contents of the SURT log into your next post please:
   
   C:\Windows\Logs\CBS\CheckSUR.log
   C:\Windows\Logs\CBS\CheckSUR.persist.log

 

[ChrisHefner]

Sorry for my delay; I have been out of town. I have applied the contents of the packs.zip as advised, and ran the SURT tool again. I have attached the new CheckSUR logs. I tried to install updates again after restarting, and 1 succeeded and 1 failed with error code 8024200D. Thank you again for your help.View attachment CheckSUR.logView attachment CheckSUR.persist.log

 

[Go The Power]

Log looks good, as for error 8024200D what update gave this error?