To get ability to run 2 monitors on my SHUTTLE SH67 (Xpc) i attempted to install a GeForce 8800 GS graphics board into the PCIe slot x16. This computer runs Win 7 Pro SP1 and is up to date. My intention was to then download drivers and then switch the monitor from the onboard graphics to one port of the graphics card (after shutting down).
Immediately upon booting I got a high pitched sound from the Shuttle so I powered down, and removed the board. Upon rebooting the shuttle now cannot start windows, but goes to windows error recovery. When i run Launch startup repair windows cannot fix.
Any ideas on how to fix?
I backed up about 10 days ago to a WD MyPassport USB drive but not sure how to access since windows is not launching.
Do I need to reinstall? The OS is on a 500 Gb SSD but my data is on a second 1TB hard drive.
Immediately upon booting I got a high pitched sound from the Shuttle so I powered down, and removed the board. Upon rebooting the shuttle now cannot start windows, but goes to windows error recovery. When i run Launch startup repair windows cannot fix.
Any ideas on how to fix?
I backed up about 10 days ago to a WD MyPassport USB drive but not sure how to access since windows is not launching.
Do I need to reinstall? The OS is on a 500 Gb SSD but my data is on a second 1TB hard drive.