MehrunesRazor
New member
- Jul 11, 2016
- 1
Hi,
I have a problem with my opencl.dll and when I looked up that in the internet, many pages told me to use SFCFix and it worked but I get this error when I run SFCFix.exe.
I'm not that much of a computer expert so I don't know what I should do. I know that this error is an issue about DISM and this program also runs a DISM command. But I couldn't fix the error so I thought I would post a thread about it and get some help, after days of trying to fix it alone.
This is the message that SFCFix.exe gives me:
Welcome to SFCFix by niemiro and sysnative.com.
Checking for updates . . .
No new update is available at this time.
Processing directive 1 of 1 (AutoAnalysis::)
Checking store directories . . .
Checking CBS.log . . .
Checking CBS.persist.log . . .
Checking CheckSUR.log . . .
Checking CheckSUR.persist.log . . .
Attempting repair . . .
Stage 1
Stage 2
Stage 3
Due to the nature of your corruptions, scan times have been extended by
approximately 15-20 minutes. Please be patient and allow the operation to
complete.
Deployment Image Servicing and Management tool
Version: 10.0.10586.0
Image Version: 10.0.10586.0
[==========================100.0%==========================]
Error: 0x800f0906
The source files could not be downloaded.
Use the "source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see Configure a Windows Repair Source.
The DISM log file can be found at C:\Windows\Logs\DISM\dism.log
And the DISM log file is attached down below. I didn't know which part of it was my last try's log, so I posted it all. Note that the date I did this is 11.07.2016 (DD-MM-YYYY) and the time's sometime after 17:30.
Thanks for the help!
I have a problem with my opencl.dll and when I looked up that in the internet, many pages told me to use SFCFix and it worked but I get this error when I run SFCFix.exe.
I'm not that much of a computer expert so I don't know what I should do. I know that this error is an issue about DISM and this program also runs a DISM command. But I couldn't fix the error so I thought I would post a thread about it and get some help, after days of trying to fix it alone.
This is the message that SFCFix.exe gives me:
Welcome to SFCFix by niemiro and sysnative.com.
Checking for updates . . .
No new update is available at this time.
Processing directive 1 of 1 (AutoAnalysis::)
Checking store directories . . .
Checking CBS.log . . .
Checking CBS.persist.log . . .
Checking CheckSUR.log . . .
Checking CheckSUR.persist.log . . .
Attempting repair . . .
Stage 1
Stage 2
Stage 3
Due to the nature of your corruptions, scan times have been extended by
approximately 15-20 minutes. Please be patient and allow the operation to
complete.
Deployment Image Servicing and Management tool
Version: 10.0.10586.0
Image Version: 10.0.10586.0
[==========================100.0%==========================]
Error: 0x800f0906
The source files could not be downloaded.
Use the "source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see Configure a Windows Repair Source.
The DISM log file can be found at C:\Windows\Logs\DISM\dism.log
And the DISM log file is attached down below. I didn't know which part of it was my last try's log, so I posted it all. Note that the date I did this is 11.07.2016 (DD-MM-YYYY) and the time's sometime after 17:30.
Thanks for the help!
