Failing hard drive?

alexdrg

Member
Joined
Jan 8, 2017
Posts
9
Hello,

Does this below mean that my hard-drive is failing? I'm already getting errors in BitTorrent regarding I/O issues - Read Error.
crystal_disk.JPG
 
It failed the test so badly it must be a new record :huh:

hard_drive.JPG

One of my friends told me that there is something to format it or test it in some way so that the bad sectors will be overlooked and what can work properly, will work. Let's see who else has a reply for this.

Maybe if I hadn't gotten so angry at fifa in the last two years it would've lasted more. Are WD still as reliable as I knew they were? :/
 
Looks to me like your hard drive is failing and you need a new one. I don't know enought about hardware to tell you if a format would work but I really don't think so. Drives can be like cars. Sometimes you get a lemon or one not made as well as the others. Good luck.
 
That is a Black series drive and comes with a 5 year warranty. Failing WD's own diagnostics ensures they will honor the warranty. Check here to see if your warranty is still in effect.
 
It's failing...hard. One question: Are WD hdds reliable and good and such? I'm going to order me a new one.
 
Ok, here's an update !! Using DISKPART in cmd after my drive disappeared after a restart, i got the below message:

diskpart.JPG

Now what? It's dead, isn't it? :sad:
 
Your image tells me that is not your boot disk, but a secondary drive. You don't want a disk to be read only. Want to be able to write to it to. And page files normally are on the boot disk, unless you manually moved it.

So is this your boot disk, or a secondary disk?
 
This is a secondary drive. Also I have bought a new hdd already. Now my inquiry is: How do I fix this old one. It worked after removing it from the laptop and placing it again but now I want to format it in such a way that only the good sectors are seen and able to perform as usual.
 
Just do a "Full" (not "Quick") format on it. That will cause the file system to touch each storage location and determine if good or bad. If bad, it will mark it in the drive's tables as bad and not use it.

That said, nothing can really "fix" a drive if the drive itself is failing. You can fix corruption, but if the sectors a physically bad, they will remain bad and it is not uncommon for a drive to continue to deteriorate from that point on. It is okay to use it, but you should make sure you keep regular backups.

So, with this drive installed as a secondary drive and note its drive letter. Using drive D as an example, open an elevated command prompt (Run as administrator) and enter format d: to start the format where "d" is the drive letter.
 

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top