[SOLVED] Failed Windows 7 Update for KB4534310 - Error 80073701

7to10issue

7to10issue

Member
Joined
Apr 28, 2020
Posts
10
Same issue like a lot of people are facing now. Can you please help?

1) sfc /scannow found no issue

2) SFCfix summary:
SFCFix version 3.0.2.1 by niemiro.
Start time: 2020-04-27 23:38:32.627
Microsoft Windows 7 Service Pack 1 - amd64
Not using a script file.




AutoAnalysis::
SUMMARY: Some corruptions could not be fixed automatically. Seek advice from helper or sysnative.com.
CBS & SFC total detected corruption count: 0
CBS & SFC total unimportant corruption count: 0
CBS & SFC total fixed corruption count: 0
SURT total detected corruption count: 56
SURT total unimportant corruption count: 0
SURT total fixed corruption count: 0
AutoAnalysis:: directive completed successfully.




Successfully processed all directives.



Failed to generate a complete zip file. Upload aborted.


SFCFix version 3.0.2.1 by niemiro has completed.
Currently storing 0 datablocks.
Finish time: 2020-04-27 23:53:32.596
----------------------EOF-----------------------
 
Hello and welcome,

Attach the logfile C:\Windows\Logs\CBS\CheckSUR.log in your next reply.
 
Follow the instructions below please.

WARNING! The following fix is specific to the user's system in this thread only. No one else should follow these instructions, as it could damage your system.
  • Download the attachment SFCFix.zip and save it on your desktop.
  • Save any work you have open, and close all programs.
  • Drag the SFCFix.zip file over the SFCFix.exe executable and release it.
    1p8eDnI.gif
  • SFCFix will launch, let it complete.
  • Once done, a file will appear on your desktop, called SFCFix.txt.
  • Attach that file to your next reply.
 

Attachments

Start the System Update Readiness Tool (SURT) again.
On completion, attach the logfile C:\Windows\Logs\CBS\CheckSUR.log in your next reply.
 
Restart the computer.
Check Windows Update again and report the result.
If it fails, attach the zipped cbs.log to your next reply.
 
Remove Update Manually
  1. Click on the Start button and in the search box, type Command Prompt.
  2. When you see Command Prompt on the list, right-click on it and select Run as administrator.
  3. When command prompt opens, copy and paste the following command into it, then press enter.
    wusa /uninstall /KB:4457144
  4. Let me know if it says it was successful or if there are any errors.
 
It ran for about two minutes. Then the popup window with title "Windows Update Standalone Installer" says

"The update KB4457144 is not installed on this computer"
 
Please do following:

FRST Registry Search
  1. Click the Start button and choose Control Panel.
  2. In the upper right corner ensure the View by: is set to Category.
  3. Select the Programs group.
  4. Click the Turn Windows features on or off link. This will bring up the Server Manager dialog.
    Note: This loads your components hive which is what we want. Please keep this dialog open while you perform the remaining steps. You can minimize it if you wish but keep it open.
  5. Download the Farbar Recovery Scan Tool and save it to your Desktop:
    64-bit: Downloading Farbar Recovery Scan Tool

  6. Right-click on the file FRST64.exe and choose Run as administrator.
  7. Copy and paste KB4457144 into the Search box and click the Search Registry button.
  8. When the scan is complete, a message will display that 'SearchReg.txt' is saved in the same folder FRST was started from. Notepad will open this file also. Close Notepad and attach the file 'SearchReg.txt' to your next reply.
  9. You may close any remaining open windows now.
 
Step 1:
Warning: This script was written specifically for this user, for use on that particular machine. Do not run this script on another machine.
  1. Download the attachment fixlist.txt and save it to your desktop.
  2. Right-click on FRST64.exe and select "Run as administrator".
  3. Press the Fix button.
  4. The tool will now process fixlist.txt.
  5. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
  6. When finished, a log called Fixlog.txt will appear in the same directory the tool is run from.
  7. Post the logfile Fixlog.txt as attachment in your next reply.

Step 2:
Restart the computer.
Check Windows Update again and report the result.
If it fails, attach the zipped cbs.log to your next reply.
 

Attachments

Success! Was able to finish updating windows. Will now try to upgrade to win10.

Attached please find the log file.

Thank you so much, Peter. Really, REALLY, appreciate your help.
 

Attachments

Great. Success with the upgrade. Report the result.
 
Hello, Peter.

I was able to successfully upgrade to Windows 10.

Thank you so much for all your help. This forum is simply incredible.
 
Your welcome. I will mark this thread as solved.

Take care.
 
You must log in or register to reply here.

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top