failed installation of windows 10 Windows 10 Update Error 0x80071160

bernardoari · Apr 6, 2020

Good afternoon friends, I have a problem when it comes to updating Windows 10. I use a version of Windows 10, now I see that there is another new version of Windows, but when I try to install it by updating this error, the same thing happens when I try to update by the .iso file that I downloaded from the official microsoft website.

bernardoari · Apr 7, 2020

when you will finish the update this message appears

Sysnative Windows Update · Apr 7, 2020

Hi!

GSmartControl
Follow the instructions below to check your SMART status with GSmartControl:

Download the portable version of GSmartControl and save it on your Desktop;
Extract the zip file to your Desktop. Open the folder gsmartcontrol-1.1.3-win64 which should be located on your Desktop and double-click gsmartcontrol.exe to launch the program.
Identify your drive in the list (if recognized by the tool), and hover your mouse over it.
You should see something called: SMART status. It will either read: Enabled, in which case you should do the following:
Double-click on it to bring up its window (usually you'll find your drive by its size or its brand name);
Go to the Self-Tests tab, then select Extended Self-test in the Test type drop-down list and click on Execute (this test can take a few hours to complete);
Once the test is over, the results will be displayed at the bottom of the window. Please copy and paste these results in your next reply or take a screenshot;
Also, go in the Attributes tab and if you have any entries highlighted in red or pink, take a screenshot of the GSmartControl window and attach it in your next reply;
Please note: If the SMART Status reads: Unsupported, stop and let me know.

bernardoari · Apr 8, 2020

softwaremaniac said:
Hi!

GSmartControl
Follow the instructions below to check your SMART status with GSmartControl:

Download the portable version of GSmartControl and save it on your Desktop;

Extract the zip file to your Desktop. Open the folder gsmartcontrol-1.1.3-win64 which should be located on your Desktop and double-click gsmartcontrol.exe to launch the program.

Identify your drive in the list (if recognized by the tool), and hover your mouse over it.

You should see something called: SMART status. It will either read: Enabled, in which case you should do the following:

Double-click on it to bring up its window (usually you'll find your drive by its size or its brand name);

Go to the Self-Tests tab, then select Extended Self-test in the Test type drop-down list and click on Execute (this test can take a few hours to complete);

Once the test is over, the results will be displayed at the bottom of the window. Please copy and paste these results in your next reply or take a screenshot;

Also, go in the Attributes tab and if you have any entries highlighted in red or pink, take a screenshot of the GSmartControl window and attach it in your next reply;

Please note: If the SMART Status reads: Unsupported, stop and let me know.

bom dia amigo, muito obrigado pela ajuda,

fiz tudo que pediu para fazer e apareceu essa tela pra mim

Sysnative Windows Update · Apr 8, 2020

Hi!

Did the test complete successfully on all of the drives? Can any of them have SMART checked?

Please attempt the updates again and attach CBS.log if the update fails again.

Search

Search

failed installation of windows 10 Windows 10 Update Error 0x80071160

bernardoari

New member

Attachments

bernardoari

New member

Attachments

Sysnative Windows Update

Inactive

bernardoari

New member

Attachments

Sysnative Windows Update

Inactive