Error: 0x800f0906

T

techs

Member
Joined
Mar 28, 2019
Posts
24
Hi there! My PC blue screened and I ran through the steps to check for errors and I'm getting this error while doing RestoreHealth. I've had this error before so I hope I can make this faster by doing the steps again.

Error: 0x800f0906

The source files could not be downloaded.
Use the "source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see Configure a Windows Repair Source. The DISM log file can be found at C:\WINDOWS\Logs\DISM\dism.log

Download multiple files from Sendspace.com - send big files the easy way

Thank you
 
SFCFix version 3.0.2.1 by niemiro.
Start time: 2019-10-19 02:24:24.328
Microsoft Windows 8.1 Update 3 - amd64
Not using a script file.




AutoAnalysis::
SUMMARY: No corruptions were detected.
AutoAnalysis:: directive completed successfully.




Successfully processed all directives.
SFCFix version 3.0.2.1 by niemiro has completed.
Currently storing 43 datablocks.
Finish time: 2019-10-19 02:29:36.267
----------------------EOF-----------------------
 
Hello and welcome!

FRST Registry Search
1. Click your Start button and type in cmd.
2.After you find the Command Prompt, right click on it and select Run as Administrator.
3. Copy and paste the following into the Command Prompt:

reg load HKLM\COMPONENTS C:\WINDOWS\SYSTEM32\CONFIG\COMPONENTS

4. Please download Farbar Recovery Scan Tool and save it to your Desktop.
Note: You need to run the 64-bit Version so please ensure you download that one.
5. Run FRST64 by Right-Clicking on the file and choosing Run as administrator.
6. Copy and paste 11.0.9600.17416 into the Search box and click the Search Registry button.
7. When the scan is complete a notepad window will open with the results. Please attach this to your next reply. It is saved on your desktop named SearchReg.txt.
 
Since you've had BSODs, let's test the HDD:


GSmartControl
Follow the instructions below to check your SMART status with GSmartControl:


  • Download the portable version of GSmartControl and save it on your Desktop;
  • Extract the zip file to your Desktop. Open the folder gsmartcontrol-1.1.3-win64 which should be located on your Desktop and double-click gsmartcontrol.exe to launch the program.
  • Identify your drive in the list (if recognized by the tool), and hover your mouse over it.
  • You should see something called: SMART status. It will either read: Enabled, in which case you should do the following:
  • Double-click on it to bring up its window (usually you'll find your drive by its size or its brand name);
  • Go to the Self-Tests tab, then select Extended Self-test in the Test type drop-down list and click on Execute (this test can take a few hours to complete);
  • Once the test is over, the results will be displayed at the bottom of the window. Please copy and paste these results in your next reply or take a screenshot;
  • Also, go in the Attributes tab and if you have any entries highlighted in red or pink, take a screenshot of the GSmartControl window and attach it in your next reply;
  • Please note: If the SMART Status reads: Unsupported, stop and let me know.
    info_failing.png
 
smartctl 6.6 2017-11-05 r4594 [x86_64-w64-mingw32-win8.1] (sf-6.6-1)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family: Samsung based SSDs
Device Model: Samsung SSD 840 EVO 250GB
Serial Number: S1DBNSBF892610L
LU WWN Device Id: 5 002538 8a066dbf6
Firmware Version: EXT0DB6Q
User Capacity: 250,059,350,016 bytes [250 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun Oct 20 11:21:41 2019 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 4800) seconds.
Offline data collection
capabilities: (0x53) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 80) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
5 Reallocated_Sector_Ct PO--CK 100 001 010 Past 0
9 Power_On_Hours -O--CK 091 091 000 - 42870
12 Power_Cycle_Count -O--CK 099 099 000 - 497
177 Wear_Leveling_Count PO--C- 085 085 000 - 171
179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 001 010 Past 0
181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0
182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0
183 Runtime_Bad_Block PO--C- 100 001 010 Past 0
187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0
190 Airflow_Temperature_Cel -O--CK 064 052 000 - 36
195 ECC_Error_Rate -O-RC- 200 200 000 - 0
199 CRC_Error_Count -OSRCK 100 100 000 - 0
235 POR_Recovery_Count -O--C- 099 099 000 - 254
241 Total_LBAs_Written -O--CK 099 099 000 - 81678202256
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning

General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 1 Comprehensive SMART error log
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x13 GPL R/O 1 SATA NCQ Send and Receive log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 16 Device vendor specific log
0xce GPL,SL VS 16 Device vendor specific log
0xde SL VS 1 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged

SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 33 -

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version: 3
SCT Version (vendor specific): 1 (0x0001)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 36 Celsius
Power Cycle Min/Max Temperature: ?/ ? Celsius
Lifetime Min/Max Temperature: ?/ ? Celsius
Under/Over Temperature Limit Count: 0/221285

SCT Temperature History Version: 2
Temperature Sampling Period: 10 minutes
Temperature Logging Interval: 10 minutes
Min/Max recommended Temperature: ?/ ? Celsius
Min/Max Temperature Limit: ?/ ? Celsius
Temperature History Size (Index): 128 (69)

Index Estimated Time Temperature Celsius
70 2019-10-19 14:10 36 *****************
71 2019-10-19 14:20 36 *****************
72 2019-10-19 14:30 36 *****************
73 2019-10-19 14:40 35 ****************
74 2019-10-19 14:50 36 *****************
75 2019-10-19 15:00 33 **************
76 2019-10-19 15:10 36 *****************
77 2019-10-19 15:20 34 ***************
78 2019-10-19 15:30 34 ***************
79 2019-10-19 15:40 34 ***************
80 2019-10-19 15:50 33 **************
81 2019-10-19 16:00 34 ***************
82 2019-10-19 16:10 36 *****************
83 2019-10-19 16:20 33 **************
84 2019-10-19 16:30 33 **************
85 2019-10-19 16:40 34 ***************
86 2019-10-19 16:50 33 **************
87 2019-10-19 17:00 33 **************
88 2019-10-19 17:10 36 *****************
89 2019-10-19 17:20 33 **************
90 2019-10-19 17:30 33 **************
91 2019-10-19 17:40 34 ***************
92 2019-10-19 17:50 33 **************
93 2019-10-19 18:00 33 **************
94 2019-10-19 18:10 36 *****************
95 2019-10-19 18:20 34 ***************
96 2019-10-19 18:30 33 **************
97 2019-10-19 18:40 35 ****************
98 2019-10-19 18:50 34 ***************
99 2019-10-19 19:00 33 **************
100 2019-10-19 19:10 35 ****************
101 2019-10-19 19:20 34 ***************
102 2019-10-19 19:30 34 ***************
103 2019-10-19 19:40 34 ***************
104 2019-10-19 19:50 35 ****************
105 2019-10-19 20:00 33 **************
106 2019-10-19 20:10 34 ***************
107 2019-10-19 20:20 34 ***************
108 2019-10-19 20:30 33 **************
109 2019-10-19 20:40 34 ***************
110 2019-10-19 20:50 34 ***************
111 2019-10-19 21:00 35 ****************
112 2019-10-19 21:10 36 *****************
113 2019-10-19 21:20 34 ***************
114 2019-10-19 21:30 34 ***************
115 2019-10-19 21:40 36 *****************
116 2019-10-19 21:50 31 ************
117 2019-10-19 22:00 31 ************
118 2019-10-19 22:10 31 ************
119 2019-10-19 22:20 30 ***********
120 2019-10-19 22:30 30 ***********
121 2019-10-19 22:40 33 **************
122 2019-10-19 22:50 31 ************
123 2019-10-19 23:00 31 ************
124 2019-10-19 23:10 35 ****************
125 2019-10-19 23:20 34 ***************
126 2019-10-19 23:30 36 *****************
127 2019-10-19 23:40 37 ******************
0 2019-10-19 23:50 37 ******************
1 2019-10-20 00:00 36 *****************
2 2019-10-20 00:10 32 *************
3 2019-10-20 00:20 31 ************
4 2019-10-20 00:30 35 ****************
5 2019-10-20 00:40 36 *****************
... ..( 2 skipped). .. *****************
8 2019-10-20 01:10 36 *****************
9 2019-10-20 01:20 35 ****************
10 2019-10-20 01:30 34 ***************
11 2019-10-20 01:40 36 *****************
12 2019-10-20 01:50 34 ***************
13 2019-10-20 02:00 34 ***************
14 2019-10-20 02:10 37 ******************
15 2019-10-20 02:20 34 ***************
16 2019-10-20 02:30 34 ***************
17 2019-10-20 02:40 39 ********************
18 2019-10-20 02:50 35 ****************
... ..( 2 skipped). .. ****************
21 2019-10-20 03:20 35 ****************
22 2019-10-20 03:30 34 ***************
23 2019-10-20 03:40 38 *******************
24 2019-10-20 03:50 35 ****************
25 2019-10-20 04:00 34 ***************
26 2019-10-20 04:10 36 *****************
27 2019-10-20 04:20 34 ***************
28 2019-10-20 04:30 34 ***************
29 2019-10-20 04:40 35 ****************
30 2019-10-20 04:50 34 ***************
31 2019-10-20 05:00 34 ***************
32 2019-10-20 05:10 35 ****************
33 2019-10-20 05:20 35 ****************
34 2019-10-20 05:30 34 ***************
35 2019-10-20 05:40 38 *******************
36 2019-10-20 05:50 35 ****************
37 2019-10-20 06:00 34 ***************
38 2019-10-20 06:10 36 *****************
39 2019-10-20 06:20 34 ***************
40 2019-10-20 06:30 34 ***************
41 2019-10-20 06:40 36 *****************
42 2019-10-20 06:50 35 ****************
43 2019-10-20 07:00 34 ***************
44 2019-10-20 07:10 38 *******************
45 2019-10-20 07:20 35 ****************
46 2019-10-20 07:30 35 ****************
47 2019-10-20 07:40 34 ***************
48 2019-10-20 07:50 35 ****************
49 2019-10-20 08:00 34 ***************
50 2019-10-20 08:10 37 ******************
51 2019-10-20 08:20 34 ***************
52 2019-10-20 08:30 34 ***************
53 2019-10-20 08:40 39 ********************
54 2019-10-20 08:50 34 ***************
55 2019-10-20 09:00 35 ****************
56 2019-10-20 09:10 38 *******************
57 2019-10-20 09:20 36 *****************
58 2019-10-20 09:30 34 ***************
59 2019-10-20 09:40 36 *****************
60 2019-10-20 09:50 34 ***************
61 2019-10-20 10:00 34 ***************
62 2019-10-20 10:10 39 ********************
63 2019-10-20 10:20 35 ****************
64 2019-10-20 10:30 35 ****************
65 2019-10-20 10:40 37 ******************
66 2019-10-20 10:50 36 *****************
67 2019-10-20 11:00 36 *****************
68 2019-10-20 11:10 36 *****************
69 2019-10-20 11:20 37 ******************

SCT Error Recovery Control:
Read: Disabled
Write: Disabled

Device Statistics (GP/SMART Log 0x04) not supported

SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 5 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC

smart.jpg
 
You must log in or register to reply here.

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top