Error: "0x8007001F-0x20006 the installation failed in the safe_os phase with an error during replicate oc operation"

[Eriquito]

Hello,

This is my first post, I would appreciate any help you could give me as I ran out of ideas now. I'm trying to upgrade my Windows 7 to Windows 10 but keep getting this error: "0x8007001F-0x20006 the installation failed in the safe_os phase with an error during replicate oc operation".

The SFCFix App identified 1 corrupted file. I'm attaching the txt. I have no experience whatsoever so I figured I'd just write to you to see if you can help me.

Thank you so much!

 

[Sysnative Windows Update]

Hello and welcome!

GSmartControl
Follow the instructions below to check your SMART status with GSmartControl:

• Download the portable version of GSmartControl and save it on your Desktop;
• Extract the zip file to your Desktop. Open the folder gsmartcontrol-1.1.3-win64 which should be located on your Desktop and double-click gsmartcontrol.exe to launch the program.
• Identify your drive in the list (if recognized by the tool), and hover your mouse over it.
• You should see something called: SMART status. It will either read: Enabled, in which case you should do the following:
• Double-click on it to bring up its window (usually you'll find your drive by its size or its brand name);
• Go to the Self-Tests tab, then select Extended Self-test in the Test type drop-down list and click on Execute (this test can take a few hours to complete);
• Once the test is over, the results will be displayed at the bottom of the window. Please copy and paste these results in your next reply or take a screenshot;
• Also, go in the Attributes tab and if you have any entries highlighted in red or pink, take a screenshot of the GSmartControl window and attach it in your next reply;
• Please note: If the SMART Status reads: Unsupported, stop and let me know.