[SOLVED] Entry point terminate could not be located

jondeadsnow

jondeadsnow

Member
Joined
Sep 7, 2019
Posts
17
Thanks in advance for your help. I have a HP pavilion laptop, 8gb ram, intel core i5 and 2g NVidia card. I've been facing an issue while running certain programms where initially it said certain .dll files were missing so the program wouldn't run. I managed to fix that issue and now it says "The Procedure entry point terminate could not be located in the dynamic link library". After doing some quick searches online I found a method to do an SFC scan. It gave the message that certain files were corrupted and could not be fixed. I then ran the DISM restore health command but it wasn't succesful giving the error code "0x80240021".
I am a complete newbie so I have no idea what to do.

I have attached the DISM and SFC logs below.

Thanks again.
 

Attachments

Sorry about that. I think I downloaded the right version now. I have attached the SFCfix text file below.
sorry again for the trouble.
 

Attachments

You did this correctly.

Please do the following now:

SFC Scan


  1. Click on the Start button and in the search box, type Command Prompt
  2. When you see Command Prompt on the list, right-click on it and select Run as administrator
  3. When command prompt opens, copy and paste the following commands into it, press enter after each

    sfc /scannow

    Wait for this to finish before you continue

    copy %windir%\logs\cbs\cbs.log "%userprofile%\Desktop\cbs.txt"
  4. This will create a file, cbs.txt on your Desktop. Please attach this to your next post.
 
I ran the DISM.

C:\Windows\system32>dism /online /cleanup-image /restorehealth

Deployment Image Servicing and Management tool
Version: 6.3.9600.17031

Image Version: 6.3.9600.17031

[==========================100.0%==========================]

Error: 0x80240021

DISM failed. No operation was performed.
For more information, review the log file.

The DISM log file can be found at C:\Windows\Logs\DISM\dism.log

C:\Windows\system32>
 

Attachments

Please do the following:

Retrieve Components Hive
1. Navigate to C:\Windows\System32\Config and locate the COMPONENTS file.
2. Please copy this file to your desktop.
Note: If you receive an error that this file is in-use, simply reboot your computer and try again.
3. Right-click on this file on your desktop and select Send To...Compressed (zipped) folder. This will create a file named COMPONENTS.ZIP on your desktop.
4. The file will likely be too large to upload here so please upload to a file sharing service. Examples of services to upload to are Dropbox or OneDrive or SendSpace and then just provide the link in your reply.
 
Please do the following:

SFCFix Script

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.


  1. Download SFCFix.exe (by niemiro) and save this to your Desktop.
  2. Download the file below, SFCFix.zip, and save this to your Desktop. Ensure that this file is named SFCFix.zip - do not rename it.
  3. Save any open documents and close all open windows.
  4. On your Desktop, you should see two files: SFCFix.exe and SFCFix.zip.
  5. Drag the file SFCFix.zip onto the file SFCFix.exe and release it.
  6. SFCFix will now process the script.
  7. Upon completion, a file should be created on your Desktop: SFCFix.txt.
  8. Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this file into your next post for me to analyse please - put [CODE][/CODE] tags around the log to break up the text.

Afterwards, do the following:

Step#1 - DISM /RestoreHealth Scan
Warning:this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.


  1. Right-click on the Start button and select Command Prompt (Admin)
  2. When command prompt opens, Copy (Ctrl+C) and Paste (Right-click > Paste) the following command into it, then press Enter
    Dism /Online /Cleanup-Image /RestoreHealth
  3. Once it finishes, copy and paste the following into the command-prompt window and press Enter. If prompted to overwrite the existing file go ahead.
    copy %windir%\logs\cbs\cbs.log "%userprofile%\Desktop\cbs.txt"
  4. Once this has completed please go to your Desktop and you will find CBS.txt => Please zip/upload to this thread.
    Please Note:: if the file is too big (over 7MB) to upload to your next post, please upload via a service such as Dropbox or One Drive or SendSpace and just provide the link.

Thank you!
 

Attachments

Code: 
SFCFix version 3.0.2.1 by niemiro.
Start time: 2019-09-09 22:29:14.422
Microsoft Windows 8.1 Update 3 - amd64
Using .zip script file at C:\Users\Jonathan\Desktop\SFCFix.zip [0]




PowerCopy::
Successfully took permissions for file or folder C:\Windows\WinSxS\amd64_netfx4-attributionfile_b03f5f7f11d50a3a_4.0.9600.21180_none_826a5c7c1410ea88

Successfully copied file C:\Users\Jonathan\AppData\Local\niemiro\Archive\WinSxS\amd64_netfx4-attributionfile_b03f5f7f11d50a3a_4.0.9600.21180_none_826a5c7c1410ea88\thirdpartynotices.txt to C:\Windows\WinSxS\amd64_netfx4-attributionfile_b03f5f7f11d50a3a_4.0.9600.21180_none_826a5c7c1410ea88\thirdpartynotices.txt.

Successfully restored ownership for C:\Windows\WinSxS\amd64_netfx4-attributionfile_b03f5f7f11d50a3a_4.0.9600.21180_none_826a5c7c1410ea88
Successfully restored permissions on C:\Windows\WinSxS\amd64_netfx4-attributionfile_b03f5f7f11d50a3a_4.0.9600.21180_none_826a5c7c1410ea88
PowerCopy:: directive completed successfully.




Successfully processed all directives.
SFCFix version 3.0.2.1 by niemiro has completed.
Currently storing 2 datablocks.
Finish time: 2019-09-09 22:29:15.958
Script hash: OJ098VHIW+wR+M1uIa81S2jA4CGFP8sBCLKFN6XlsKA=
----------------------EOF-----------------------
 

Attachments

Hey, I made sure that all the C++ packages were installed. I am still getting an "The procedure entry point terminate could not be located in the dynamic link library" error.
I re installed the applications and the error still persists.
 

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top