[SOLVED] DISM Error 0x800f0907, 0x80070057 - Preventing adding Roles & Features

[Tynecider]

Good afternoon All,

Been trying to add roles and features to a server and getting an error: 0x80070057.

I have tried specifying an alternative location in the wizard without success and I have tried to install via Powershell with the same result and error.

I have started to troubleshoot this and have collected the following:

sfc /scannow

Beginning system scan. This process will take some time.

Beginning verification phase of system scan.
Verification 100% complete.

Windows Resource Protection did not find any integrity violations.

dism /online /cleanup-image /restorehealth

Deployment Image Servicing and Management tool
Version: 10.0.14393.4169

Image Version: 10.0.14393.4169

[===========================97.3%======================== ]
Error: 0x800f0907

DISM failed. No operation was performed.
For more information, review the log file.

The DISM log file can be found at C:\Windows\Logs\DISM\dism.log

I have ran the ComponentScanner and have attached all the files required (CBS/DISM/CS logs)

Operating System:
Windows Server 2016 version 1607 (OS Build 14393.5648
Patched to 2023-03

I know this is the Windows update forum, but I suspect I could have an issue with some updates causing this issue, thanks for looking :)

 

[Maxstar]

Hi and welcome to Sysnative,

Follow these instructions to remove an update.

• Open the Start menu of Windows and type the command CMD
• When you see Command Prompt on the list, right-click on it and select Run as administrator.
• When command prompt opens, copy and paste the following command into it, then press enter.

wusa /uninstall /KB:4284833

• Let me know if it says it was successful or you get the message: The update KB4284833 is not installed on this computer.

 

[Tynecider]

Hi Maxstar,

That update is not installed on the server.

"The update KB4284833 is not installed on this computer"

Thanks

 

[Maxstar]

Hi,

Download the

Farbar Recovery Scan Tool and save it to your Desktop:

Download the 64 bit version: - Farbar Recovery Scan Tool Link

• Open the startmenu and type the command cmd.
• After you find the Command Prompt, right click on it and select Run as Administrator.
• Copy and paste the following into the Command Prompt and press enter.

reg load HKLM\COMPONENTS C:\WINDOWS\SYSTEM32\CONFIG\COMPONENTS

Right-click on the file FRST64.exe and choose Run as administrator.

• Copy and paste the following (code) into the Search box and click the Search Registry button.

KB4284833

• When the scan is complete, a message will display that SearchReg.txt is saved in the same folder FRST was started from.
• Post the logfile SearchReg.txt as attachment in your next reply.

 

[Tynecider]

SearchReg complete

 

[Maxstar]

Start the

Farbar Recovery Scan Tool again.

Warning: This script was written specifically for this system. Do not run this script on another system.

• Download the attachment fixlist.txt and save it to your desktop.
• Right-click on FRST.exe and select "Run as administrator".
• Press the Fix button.
• If for some reason the tool needs a restart, please make sure you let the system restart normally.
• When finished, a log called Fixlog.txt will appear in the same directory the tool is run from.
• Post the logfile Fixlog.txt as attachment in your next reply.

 

[Tynecider]

Fixlog complete

 

[Maxstar]

Run the following DISM command and post the result. If it fails attach a new copy of the CBS log.

DISM /online /cleanup-image /RestoreHealth

 

[Tynecider]

Thanks Maxstar, This seems to have fixed the issue

 

[Maxstar]

Hi,

You're welcome. Glad to hear the problem has been resolved..