[SOLVED] CSI C Mark Deployment Missing

I

ivan_05

Member
Joined
Jun 4, 2019
Posts
21
Over the problem I have been fighting for more than one week and no way. Bumped into Search on your forum. Please help with what you can.
 

Attachments

OK. Please do the following:

Retrieve Components Hive
1. Navigate to C:\Windows\System32\Config and locate the COMPONENTS file.
2. Please copy this file to your desktop.
Note: If you receive an error that this file is in-use, simply reboot your computer and try again.
3. Right-click on this file on your desktop and select Send To...Compressed (zipped) folder. This will create a file named COMPONENTS.ZIP on your desktop.
4. The file will likely be too large to upload here so please upload to a file sharing service. Examples of services to upload to are Dropbox or OneDrive or SendSpace and then just provide the link in your reply.
 
Install Update with DISM
  1. Download this update and save to your desktop. The file name will be Windows6.1-KB4489892-x64.cab.zip.
  2. Right-click on this file and select Extract All... Click the Extract button. You can close the folder window that opens
  3. Click on the Start button and in the search box, type Command Prompt
  4. When you see Command Prompt on the list, right-click on it and select Run as administrator. Go ahead and allow if you receive the UAC prompt.
  5. Copy and paste the following command into the command prompt window and press enter.

    dism /online /add-package /packagepath:%userprofile%\desktop\Windows6.1-KB4489892-x64.cab
  6. You should receive the message:
    The operation completed successfully.
    Restart Windows to complete this operation. <---You may not get this line.
    Do you want to restart the computer now (Y/N)? <---You may not get this line.
 
FRST Registry Search
1. Click your Start button and type in cmd. Press Enter.
2. Copy paste the following into the Command Prompt:

reg load HKLM\COMPONENTS C:\WINDOWS\SYSTEM32\CONFIG\COMPONENTS

3. Please download Farbar Recovery Scan Tool and save it to your Desktop.
Note: You need to run the 64-bit Version so please ensure you download that one.
4. Run FRST64 by Right-Clicking on the file and choosing Run as administrator.
5. Copy and paste KB4486565 into the Search box and click the Search Registry button.
6. When the scan is complete a notepad window will open with the results. Please attach this to your next reply. It is saved on your desktop named SearchReg.txt.
 
Step#1 - FRST Fix
NOTICE: This script was written specifically for this user, for use on that particular machine. Running this on another machine may cause damage to your operating system
1. Please download Farbar Recovery Scan Tool and save it to your Desktop.
Note: You need to run the 64-bit Version so please ensure you download that one.
2. Download the attached fixlist.txt and save it to the Desktop.
Note. It's important that both files, FRST64 and fixlist.txt are in the same location or the fix will not work (in this case...the desktop).
3. Run FRST64 by Right-Clicking on the file and choosing Run as administrator.
4. Press the Fix button just once and wait. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
5. When finished FRST64 will generate a log on the Desktop (Fixlog.txt). Please post the contents of it in your reply.
 

Attachments

These are related to the update I just ripped out of your system. I would advise against repairing those, because if I do, you'd have that very update installed again and you would be prone to more complex errors down the road.
 
You must log in or register to reply here.

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top