Corrupt Win7/32 Pro repair

[odtmod]

Following a recent major system crash I now have these issues.
1. All Wi-Fi adapters (I tried 2 verified good USB wifi adapters in addition to the built-in) fails to install.
Wired LAN works without any problems.
Other USB components install normally upon insertion, only WiFi keep failing.
2. Taskbar LAN cable connection icon always has a Red X on it regardless connection status.

I disabled wifi card in the Bios to attempt fresh drivers re-installation as well as tried 2 additional USB wifi N adapters and both fails to install.

I suspect corrupt system files may be the cause
SFCFix found and fixed 5 corrupted system files on first run but there are many others it was not able to fix.
(attached SFCFix report of the 2nd run)
I don't have an earlier restore point to use.

Any help beside original image restoration will be great.

Thank you
View attachment SFCFix.txt

 

[zcomputerwiz]

Hi there odtmod,

Let's check your disk's SMART stats.

GSmartControl
Follow the instructions below to test your hard drive health with GSmartControl:

• Download GSmartControl and save it on your Desktop;
• Extract the content of the GSmartControl .zip archive and execute gsmartcontrol.exe; To extract you can right-click your mouse on the GSmartControl.zip file and select Extract.
• Identify your drive in the list, and double-click on it to bring up it's window (usually you'll find your drive by it's size or it's brand name);
• Go in the Perform Tests tab, then select Extended Self-test in the Test type drop-down list and click on Execute (this test can take a few hours to complete);
• Once the test is over, the results will be displayed at the bottom of the window. Please copy and paste these results in your next reply;
• Also, go in the Attributes tab and if you have any entries highlighted in red or pink, copy and paste their name in your next reply (or take a screenshot of the GSmartControl window and attach it in your next reply);
  
  

 

[odtmod]

Thank you for taking the time.
I ran the test Extended Self-Test and no errors were found.
One thing that was odd; the estimated test time displayed was close to 4.5 Hours but the test completed in less that 30 seconds, is it normal?

I included screenshots and error report for your review

Thanks again

 

[zcomputerwiz]

Very good. Let's check with SURT next.

System Update Readiness Tool (SURT)

Download and run the System Update Readiness Tool for your version of Windows here: System Update Readiness Tool

NOTE: If you aren't sure if your Windows installation is 32-bit or 64-bit, check here: How to determine whether a computer is running a 32-bit version or 64-bit version of the Windows operating system

This tool will take some time to complete - when it has finished, attach C:\Windows\Logs\CBS\CheckSUR.log with your reply.

 

[odtmod]

Hi zcomputerwiz,
Thank you again for your help.
See attached CheckSUR.log

Thanks

 

[zcomputerwiz]

Windows Update Package Replacement

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

1. Please download the attached file, Packs.zip and save this to your Desktop.
2. Right-click on the file and select Extract All...
3. Tick the box labelled Show extracted files when complete then click Extract
4. A window will open showing two folders, Manifests and Packages
5. Open the Manifests folder and copy the files into the following folder (if there are any files)
   
   C:\Windows\Temp\CheckSur\Winsxs\Manifests
   
   
6. Open the Packages folder and copy the files into the following folder (if there are any files)
   
   C:\Windows\Temp\CheckSur\Servicing\Packages
   
   
7. Run the System Update Readiness Tool (SURT) again.
8. When the SURT finishes installing, copy (Ctrl + C) and paste (Ctrl + V) the contents of the SURT log into your next post please:
   
   C:\Windows\Logs\CBS\CheckSUR.log

View attachment packs.zip

I'd also like to take a look at the components hive.

Please manually upload the components hive by following these instructions:

Upload Components Hive

1. Navigate to C:\Windows\System32\config
2. Right-click on the current COMPONENTS file and select copy
   Note: If you get an error that the file is in use, reboot your computer and then try again.
3. Right-click on your Desktop and select paste
4. Right-click on the COMPONENTS file on your Desktop and select Send To -> Compressed (zipped) Folder
5. Upload the zip from your Desktop to a file sharing service such as DropBox, OneDrive, SendSpace, etc. and include the link with your reply.

 

[odtmod]

zcomputerwiz,

Here is the link to components.rar

[FONT=source_sans_proregular]https://mega.nz/#!R4sUzRCI!VLFJozv65OziW36wx856HwzGTGmqKXWnILobWG2NuB8

See attached new CheckSUR.log

[/FONT]Thank you again[FONT=source_sans_proregular]


[/FONT]

 

[zcomputerwiz]

Windows Update Package Replacement

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

1. Please download the attached file, Packs.zip and save this to your Desktop.
2. Right-click on the file and select Extract All...
3. Tick the box labelled Show extracted files when complete then click Extract
4. A window will open showing two folders, Manifests and Packages
5. Open the Manifests folder and copy the files into the following folder (if there are any files)
   
   C:\Windows\Temp\CheckSur\Winsxs\Manifests
   
   
6. Open the Packages folder and copy the files into the following folder (if there are any files)
   
   C:\Windows\Temp\CheckSur\Servicing\Packages
   
   
7. Run the System Update Readiness Tool (SURT) again.
8. When the SURT finishes installing, copy (Ctrl + C) and paste (Ctrl + V) the contents of the SURT log into your next post please:
   
   C:\Windows\Logs\CBS\CheckSUR.log

View attachment packs.zip

 

[odtmod]

View attachment CheckSUR.log

Attached updated CheckSUR.log (1/17/2017 @ 4:43 PM)

Thank you

 

[zcomputerwiz]

(f)	CSI Payload File Corrupt	0x00000000	mspatcha.dll	x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049	
(f)	CSI Payload File Corrupt	0x00000000	mspatcha.dll	x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17514_none_0b66cb34258c936f	
(f)	CSI Payload File Corrupt	0x00000000	mspatcha.dll	x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7600.16385_none_0935b76c289e0fd5

SFCFix Script

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

1. Download SFCFix.exe (by niemiro) and save this to your Desktop.
2. Download the file below, SFCFix.zip, and save this to your Desktop. Ensure that this file is named SFCFix.zip - do not rename it.
3. Save any open documents and close all open windows.
4. On your Desktop, you should see two files: SFCFix.exe and SFCFix.zip.
5. Drag the file SFCFix.zip onto the file SFCFix.exe and release it.
6. SFCFix will now process the script.
7. Upon completion, a file should be created on your Desktop: SFCFix.txt.
8. Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this file into your next post for me to analyse please - put [CODE][/CODE] tags around the log to break up the text.

View attachment SFCFix.zip

Once SFCFix has completed, run SURT again. When SURT has finished, please attach C:\Windows\Logs\CBS\CheckSUR.log

 

[odtmod]

SFCFix version 3.0.0.0 by niemiro.
Start time: 2017-01-18 17:51:25.609
Microsoft Windows 7 Service Pack 1 - x86
Using .zip script file at C:\Users\User\Desktop\PC repair\SFCFix.zip [0]








PowerCopy::
Successfully took permissions for file or folder C:\Windows\winsxs\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\mspatcha.dll


Successfully copied file C:\Users\User\AppData\Local\niemiro\Archive\winsxs\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\mspatcha.dll to C:\Windows\winsxs\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\mspatcha.dll.
Successfully copied file C:\Users\User\AppData\Local\niemiro\Archive\winsxs\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17514_none_0b66cb34258c936f\mspatcha.dll to C:\Windows\winsxs\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17514_none_0b66cb34258c936f\mspatcha.dll.
Successfully copied file C:\Users\User\AppData\Local\niemiro\Archive\winsxs\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7600.16385_none_0935b76c289e0fd5\mspatcha.dll to C:\Windows\winsxs\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7600.16385_none_0935b76c289e0fd5\mspatcha.dll.


Successfully restored ownership for C:\Windows\winsxs\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\mspatcha.dll
Successfully restored permissions on C:\Windows\winsxs\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\mspatcha.dll
PowerCopy:: directive completed successfully.








Successfully processed all directives.
SFCFix version 3.0.0.0 by niemiro has completed.
Currently storing 6 datablocks.
Finish time: 2017-01-18 17:51:25.963
Script hash: ckbKaNKPerchJwl6i+f23uGr9Jmw1+Tv9roYAR7zsWA=
----------------------EOF-----------------------

 

[zcomputerwiz]

Looks like the log might be clean. Please run SURT again and attach the log to verify.

 

[odtmod]

Here is the updated CheckSUR.log

Thanks

 

[zcomputerwiz]

(f)	CSI C Mark Deployment Not Marked	0x00000000	c!policy.14.0..g.vc140.mfc_f92d94485545da78_14.0.24210.0_ce167c85fbed1945	x86_policy.14.0.avg.vc140.mfc_f92d94485545da78_14.0.24210.0_none_ce167c85fbed1945	
(f)	CSI C Mark Deployment Not Marked	0x00000000	c!avg.vc140.crt_f92d94485545da78_14.0.24210.0_b1a7386eee2cbfb4	x86_avg.vc140.crt_f92d94485545da78_14.0.24210.0_none_b1a7386eee2cbfb4	
(f)	CSI C Mark Deployment Not Marked	0x00000000	c!policy.14.0..g.vc140.crt_f92d94485545da78_14.0.24210.0_d595624ff71e9c62	x86_policy.14.0.avg.vc140.crt_f92d94485545da78_14.0.24210.0_none_d595624ff71e9c62	
(f)	CSI C Mark Deployment Not Marked	0x00000000	c!avg.vc140.mfc_f92d94485545da78_14.0.24210.0_aa2852a4f2fb3c97	x86_avg.vc140.mfc_f92d94485545da78_14.0.24210.0_none_aa2852a4f2fb3c97

SFCFix Script

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

1. Download SFCFix.exe (by niemiro) and save this to your Desktop.
2. Download the file below, SFCFix.zip, and save this to your Desktop. Ensure that this file is named SFCFix.zip - do not rename it.
3. Save any open documents and close all open windows.
4. On your Desktop, you should see two files: SFCFix.exe and SFCFix.zip.
5. Drag the file SFCFix.zip onto the file SFCFix.exe and release it.
6. SFCFix will now process the script.
7. Upon completion, a file should be created on your Desktop: SFCFix.txt.
8. Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this file into your next post for me to analyse please - put [CODE][/CODE] tags around the log to break up the text.

View attachment SFCFix.zip

Once SFCFix has finished, run SURT again.
When SURT completes, attach C:\Windows\Logs\CBS\CheckSUR.log with your reply.

 

[odtmod]

Here are the results for your analysis, thank you

SFCFix version 3.0.0.0 by niemiro.
Start time: 2017-01-28 09:19:23.917
Microsoft Windows 7 Service Pack 1 - x86
Using .zip script file at C:\Users\User\Desktop\PC repair\SFCFix.zip [1]


PowerCopy::
Successfully took permissions for file or folder C:\Windows\winsxs\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\mspatcha.dll


WARNING: File C:\Windows\winsxs\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\mspatcha.dll was not backed up as that would replace the current backup.
Successfully copied file C:\Users\User\AppData\Local\niemiro\Archive\winsxs\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\mspatcha.dll to C:\Windows\winsxs\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\mspatcha.dll.
WARNING: File C:\Windows\winsxs\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17514_none_0b66cb34258c936f\mspatcha.dll was not backed up as that would replace the current backup.
Successfully copied file C:\Users\User\AppData\Local\niemiro\Archive\winsxs\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17514_none_0b66cb34258c936f\mspatcha.dll to C:\Windows\winsxs\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17514_none_0b66cb34258c936f\mspatcha.dll.
WARNING: File C:\Windows\winsxs\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7600.16385_none_0935b76c289e0fd5\mspatcha.dll was not backed up as that would replace the current backup.
Successfully copied file C:\Users\User\AppData\Local\niemiro\Archive\winsxs\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7600.16385_none_0935b76c289e0fd5\mspatcha.dll to C:\Windows\winsxs\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7600.16385_none_0935b76c289e0fd5\mspatcha.dll.


Successfully restored ownership for C:\Windows\winsxs\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\mspatcha.dll
Successfully restored permissions on C:\Windows\winsxs\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\mspatcha.dll
PowerCopy:: directive completed successfully.


Successfully processed all directives.
SFCFix version 3.0.0.0 by niemiro has completed.
Currently storing 6 datablocks.
Finish time: 2017-01-28 09:19:24.229
Script hash: ckbKaNKPerchJwl6i+f23uGr9Jmw1+Tv9roYAR7zsWA=
----------------------EOF-----------------------

 

[zcomputerwiz]

Looks like that was an earlier SFCFix script. Try it again with this one : SFCFix.zip

 

[odtmod]

I hope I got it right this time.

Thanks again

SFCFix version 3.0.0.0 by niemiro.
Start time: 2017-01-31 12:43:18.859
Microsoft Windows 7 Service Pack 1 - x86
Using .zip script file at C:\Users\User\Desktop\PC repair\SFCFix(2).zip [0]








RegistryScript::
Successfully took ownership and permissions for registry key HKEY_LOCAL_MACHINE\COMPONENTS\DerivedData\Components\x86_avg.vc140.mfc_f92d94485545da78_14.0.24210.0_none_aa2852a4f2fb3c97.
Successfully took ownership and permissions for registry key HKEY_LOCAL_MACHINE\COMPONENTS\DerivedData\Components\x86_policy.14.0.avg.vc140.crt_f92d94485545da78_14.0.24210.0_none_d595624ff71e9c62.
Successfully took ownership and permissions for registry key HKEY_LOCAL_MACHINE\COMPONENTS\DerivedData\Components\x86_avg.vc140.crt_f92d94485545da78_14.0.24210.0_none_b1a7386eee2cbfb4.
Successfully took ownership and permissions for registry key HKEY_LOCAL_MACHINE\COMPONENTS\DerivedData\Components\x86_policy.14.0.avg.vc140.mfc_f92d94485545da78_14.0.24210.0_none_ce167c85fbed1945.


Successfully deleted registry key HKEY_LOCAL_MACHINE\COMPONENTS\DerivedData\Components\x86_avg.vc140.mfc_f92d94485545da78_14.0.24210.0_none_aa2852a4f2fb3c97.
Successfully deleted registry key HKEY_LOCAL_MACHINE\COMPONENTS\DerivedData\Components\x86_policy.14.0.avg.vc140.crt_f92d94485545da78_14.0.24210.0_none_d595624ff71e9c62.
Successfully deleted registry key HKEY_LOCAL_MACHINE\COMPONENTS\DerivedData\Components\x86_avg.vc140.crt_f92d94485545da78_14.0.24210.0_none_b1a7386eee2cbfb4.
Successfully deleted registry key HKEY_LOCAL_MACHINE\COMPONENTS\DerivedData\Components\x86_policy.14.0.avg.vc140.mfc_f92d94485545da78_14.0.24210.0_none_ce167c85fbed1945.


Failed to open registry key HKEY_LOCAL_MACHINE\COMPONENTS\DerivedData\Components\x86_avg.vc140.mfc_f92d94485545da78_14.0.24210.0_none_aa2852a4f2fb3c97 with error code ERROR_FILE_NOT_FOUND.
Failed to open registry key HKEY_LOCAL_MACHINE\COMPONENTS\DerivedData\Components\x86_policy.14.0.avg.vc140.crt_f92d94485545da78_14.0.24210.0_none_d595624ff71e9c62 with error code ERROR_FILE_NOT_FOUND.
Failed to open registry key HKEY_LOCAL_MACHINE\COMPONENTS\DerivedData\Components\x86_avg.vc140.crt_f92d94485545da78_14.0.24210.0_none_b1a7386eee2cbfb4 with error code ERROR_FILE_NOT_FOUND.
Failed to open registry key HKEY_LOCAL_MACHINE\COMPONENTS\DerivedData\Components\x86_policy.14.0.avg.vc140.mfc_f92d94485545da78_14.0.24210.0_none_ce167c85fbed1945 with error code ERROR_FILE_NOT_FOUND.
RegistryScript:: directive failed to complete successfully.








Failed to process all directives successfully.
SFCFix version 3.0.0.0 by niemiro has completed.
Currently storing 10 datablocks.
Finish time: 2017-01-31 12:43:20.024
Script hash: 4Wgae5UPRSEBJxtJRvlbU6lAb25Z8XQ5IVDsMRYJ7wc=
----------------------EOF-----------------------

 

[zcomputerwiz]

Looks good. Let's check for corrupt system files with SFC.

SFC Scan

1. Click on the Start
   
   button and in the search box, type Command Prompt
2. When you see Command Prompt on the list, right-click on it and select Run as administrator
3. When command prompt opens, copy and paste the following commands into it, press enter after each
   
   sfc /scannow
   
   Wait for this to finish before you continue
   
   copy %windir%\logs\cbs\cbs.log %userprofile%\Desktop\cbs.txt
   
   
4. This will create a file, cbs.txt on your Desktop. Please zip and attach this to your next post.

 

[odtmod]

See attached cbs.RARView attachment cbs.rar

 

[zcomputerwiz]

CORRUPT: C:\Windows\WinSxS\x86_microsoft-windows-c..ent-xpsgdiconverter_31bf3856ad364e35_7.1.7601.16492_none_060bf0a8d4bc1f75\XpsGdiConverter.dll do not match actual file
CORRUPT: C:\Windows\WinSxS\x86_microsoft-windows-c..mplus-runtime-mtxdm_31bf3856ad364e35_6.1.7600.16385_none_17c66e0434c0219e\mtxdm.dll do not match actual file
CORRUPT: C:\Windows\WinSxS\x86_microsoft-windows-com-legacyole_31bf3856ad364e35_6.1.7601.17514_none_41230ef33088513e\olethk32.dll do not match actual file
CORRUPT: C:\Windows\WinSxS\x86_microsoft-windows-credssp-adm_31bf3856ad364e35_6.1.7601.18496_none_da96fa93b9fa20f4\CredSsp.admx do not match actual file
CORRUPT: C:\Windows\WinSxS\x86_microsoft-windows-d..gement-winproviders_31bf3856ad364e35_6.1.7601.23471_none_b99aae8c1c7f6d35\OSProvider.dll do not match actual file
CORRUPT: C:\Windows\WinSxS\x86_microsoft-windows-e..phenation.resources_31bf3856ad364e35_6.3.9600.16428_en-us_8b448a8e923c39c8\elshyph.dll.mui do not match actual file
CORRUPT: C:\Windows\WinSxS\x86_microsoft-windows-ehome-mspbda-inf_31bf3856ad364e35_6.1.7600.16385_none_fc11d06c1113ae11\MsPbdaCoInst.dll do not match actual file
CORRUPT: C:\Windows\WinSxS\x86_microsoft-windows-f..client-applications_31bf3856ad364e35_6.1.7601.17559_none_7adad81486c46c63\WFSR.dll do not match actual file
CORRUPT: C:\Windows\WinSxS\x86_microsoft-windows-i..ptdebugui.resources_31bf3856ad364e35_11.2.9600.16428_en-us_782230ccf6f5f372\jsdbgui.dll.mui do not match actual file
CORRUPT: C:\Windows\WinSxS\x86_microsoft-windows-ie-devtools.resources_31bf3856ad364e35_11.2.9600.16428_en-us_e1b8d06506ac3156\iedvtool.dll.mui do not match actual file
CORRUPT: C:\Windows\WinSxS\x86_microsoft-windows-irftp_31bf3856ad364e35_6.1.7600.16385_none_5690970fdf952e2a\irftp.exe do not match actual file
CORRUPT: C:\Windows\WinSxS\x86_microsoft-windows-m..cursor-library-ansi_31bf3856ad364e35_6.1.7601.17632_none_503a105aff08ecca\odbccr32.dll do not match actual file
CORRUPT: C:\Windows\WinSxS\x86_microsoft-windows-mapi_31bf3856ad364e35_6.1.7601.19073_none_ad12945a783397fe\fixmapi.exe do not match actual file
CORRUPT: C:\Windows\WinSxS\x86_microsoft-windows-mfmjpegdec_31bf3856ad364e35_6.1.7600.16385_none_19344de4b542ee1d\mfmjpegdec.dll do not match actual file
CORRUPT: C:\Windows\WinSxS\x86_microsoft-windows-n..iagnosticsframework_31bf3856ad364e35_6.1.7601.17514_none_de622c363f0c5007\ndfetw.dll do not match actual file
CORRUPT: C:\Windows\WinSxS\x86_microsoft-windows-n..iagnosticsframework_31bf3856ad364e35_6.1.7601.17514_none_de622c363f0c5007\ndproxystub.dll do not match actual file
CORRUPT: C:\Windows\WinSxS\x86_microsoft-windows-nativehooks_31bf3856ad364e35_6.1.7600.16385_none_f76fec9dce5c30e0\NativeHooks.dll do not match actual file
CORRUPT: C:\Windows\WinSxS\x86_microsoft-windows-nbtstat_31bf3856ad364e35_6.1.7600.16385_none_9de6da957fb287cb\nbtstat.exe do not match actual file
CORRUPT: C:\Windows\WinSxS\x86_microsoft-windows-ncdprop_31bf3856ad364e35_6.1.7600.16385_none_538c12567156d10b\NcdProp.dll do not match actual file
CORRUPT: C:\Windows\WinSxS\x86_microsoft-windows-s..chrecognizerenu.ale_31bf3856ad364e35_6.1.7600.16385_en-us_ce081cc30a31a65b\grph1033.lxa do not match actual file
CORRUPT: C:\Windows\WinSxS\x86_microsoft-windows-scheduleui_31bf3856ad364e35_6.1.7600.16385_none_74990c26730e98ea\loghours.dll do not match actual file
CORRUPT: C:\Windows\WinSxS\x86_microsoft-windows-smartcardksp_31bf3856ad364e35_6.1.7601.17514_none_b7f7d8e8e19ade8a\scksp.dll do not match actual file
CORRUPT: C:\Windows\WinSxS\x86_microsoft-windows-smb10-minirdr_31bf3856ad364e35_6.1.7601.23601_none_8b3d33bdc2c931a6\mrxsmb10.sys do not match actual file
CORRUPT: C:\Windows\WinSxS\x86_microsoft-windows-streambufferengine_31bf3856ad364e35_6.1.7601.17528_none_348c54590fb33a52\sbe.dll do not match actual file
CORRUPT: C:\Windows\WinSxS\x86_microsoft-windows-wimgapi_31bf3856ad364e35_6.1.7601.17514_none_8b030c557320a2c1\wimgapi.dll do not match actual file
CORRUPT: C:\Windows\WinSxS\x86_netfx-scripting_engine_tlb_b03f5f7f11d50a3a_6.1.7601.18523_none_89e58860940166eb\Microsoft.JScript.tlb do not match actual file
CORRUPT: C:\Windows\WinSxS\x86_server-help-chm.ieakmmc.resources_31bf3856ad364e35_6.1.7600.16385_en-us_61871108255d9f28\ieakmmc.CHM do not match actual file
CORRUPT: C:\Windows\WinSxS\x86_server-help-chm.ipsecpolicy.resources_31bf3856ad364e35_6.1.7600.16385_en-us_571491cbf15e9249\ipsecpolicy.CHM do not match actual file
CORRUPT: C:\Windows\WinSxS\msil_miguicontrols_31bf3856ad364e35_6.1.7601.17514_none_b05042799add2c18\MIGUIControls.dll do not match actual file

SFCFix Script

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

1. Download SFCFix.exe (by niemiro) and save this to your Desktop.
2. Download the file below, SFCFix.zip, and save this to your Desktop. Ensure that this file is named SFCFix.zip - do not rename it.
3. Save any open documents and close all open windows.
4. On your Desktop, you should see two files: SFCFix.exe and SFCFix.zip.
5. Drag the file SFCFix.zip onto the file SFCFix.exe and release it.
6. SFCFix will now process the script.
7. Upon completion, a file should be created on your Desktop: SFCFix.txt.
8. Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this file into your next post for me to analyse please - put [CODE][/CODE] tags around the log to break up the text.

View attachment SFCFix.zip

SFC Scan

1. Click on the Start
   
   button and in the search box, type Command Prompt
2. When you see Command Prompt on the list, right-click on it and select Run as administrator
3. When command prompt opens, copy and paste the following commands into it, press enter after each
   
   sfc /scannow
   
   Wait for this to finish before you continue
   
   copy %windir%\logs\cbs\cbs.log %userprofile%\Desktop\cbs.txt
   
   
4. This will create a file, cbs.txt on your Desktop. Please zip and attach this to your next post.