Consistent pop/crack in audio and DPC latency in USBPORT.sys

logik

New member
Joined
May 28, 2018
Posts
2
Greetings all, I've been here lurking heavily, attempting to do my best to research and diagnose before I made a post. I've attempted many different configurations, settings, disabling services, usb ports, bios settings, etc. but a consistent popping/cracking forever remains no matter what I do. I love music, but I can't even listen to anything for more than 5 minutes due to this issue.

Speccy
http://speccy.piriform.com/results/SnFLxE8ZNUhcZzRiTZ0s1DN

Laptop or Desktop?



  • Desktop
OS ? (Windows 10, 8.1, 8, 7, Vista)


  • Windows 10 Home Edition
x86 (32bit) or x64 (64bit)?


  • x64
What was original installed OS on system?


  • Windows 10
Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)?


  • Full retail version
Age of system? (hardware)


  • As old as 6years to as new as this year
Age of OS installation?


  • few hours ago
Have you re-installed the OS?


  • Yes a few times, twice this week.
CPU


  • Intel Core i5-3570k
RAM (brand, EXACT model, what slots are you using?)


  • CORSAIR Vengeance 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model CMZ8GX3M2A1600C9B clocked @ 1600 in bios
Video Card


  • PNY - NVIDIA GeForce GTX 1050 Ti XLR8 Gaming Overclocked Edition 4GB GDDR5 PCI Express 3.0
MotherBoard


  • ASUS Sabertooth Z77 ATX Motherboard ‑ LGA1155
Power Supply


  • CX Series™ CX650 — 650 Watt 80 PLUS® Bronze Certified ATX PSU
Is driver verifier enabled or disabled?


  • no
What security software are you using? (Firewall, antivirus, antimalware, antispyware, and so forth)


  • None, disabled windows defender
Are you using proxy, vpn, ipfilters or similar software?


  • None on this install
Are you using Disk Image tools? (like daemon tools, alcohol 52% or 120%, virtual CloneDrive, roxio software)


  • No
Are you currently under/overclocking? Are there overclocking software installed on your system?


  • Stable clocked at 3.4mhz and 1.07v, no auto clock or voltage features enabled in bios
 

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top