[SOLVED] Code 80073701 failed to install KB4516065

P

pkinn

Contributor
Joined
Sep 15, 2019
Posts
37
Hi,

I have run in to problem when trying to install KB4516065 with failure CODE 80073701.

I have been running sfc/scannow with nothing wrong found.
I have also been running SURT/DISM Scan and it was installed successfully. Update still failed.
Then i was running SFCFix and it resulted in the following text.

SFCFix version 3.0.2.1 by niemiro.
Start time: 2019-09-16 21:26:33.661
Microsoft Windows 7 Service Pack 1 - amd64
Not using a script file.




AutoAnalysis::
SUMMARY: Some corruptions could not be fixed automatically. Seek advice from helper or sysnative.com.
CBS & SFC total detected corruption count: 0
CBS & SFC total unimportant corruption count: 0
CBS & SFC total fixed corruption count: 0
SURT total detected corruption count: 946
SURT total unimportant corruption count: 0
SURT total fixed corruption count: 0
AutoAnalysis:: directive completed successfully.




Successfully processed all directives.
SFCFix version 3.0.2.1 by niemiro has completed.
Currently storing 0 datablocks.
Finish time: 2019-09-16 21:31:04.400
----------------------EOF-----------------------

And here is the link to the zipped CBS folder
CBS.zip

Thank's in advance
Per
 
Hello and welcome!

SFCFix Script

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.


  1. Download SFCFix.exe (by niemiro) and save this to your Desktop.
  2. Download the file below, SFCFix.zip, and save this to your Desktop. Ensure that this file is named SFCFix.zip - do not rename it.
  3. Save any open documents and close all open windows.
  4. On your Desktop, you should see two files: SFCFix.exe and SFCFix.zip.
  5. Drag the file SFCFix.zip onto the file SFCFix.exe and release it.
  6. SFCFix will now process the script.
  7. Upon completion, a file should be created on your Desktop: SFCFix.txt.
  8. Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this file into your next post for me to analyse please - put [CODE][/CODE] tags around the log to break up the text.

Afterwards, run System Update Readiness Tool again and attach CheckSUR.log.
 

Attachments

Hi, Thank,s for the quick respons.
Here is the result from SFCFix run.

I have attached the SFCFix file as it is because it has more than 200000 lines and your post reply is restricted to not more than 200000 lines.

Kind regards Per
 

Attachments

Hi,
Sadly it failed so here is the download link to the zipped CBS folder.

CBS.zip

Thank's for your patience.
Kind regards
Per
 
Hi!

FRST Registry Search
1. Click your Start button and type in cmd.
2.After you find the Command Prompt, right click on it and select Run as Administrator.
3. Copy and paste the following into the Command Prompt:

reg load HKLM\COMPONENTS C:\WINDOWS\SYSTEM32\CONFIG\COMPONENTS

4. Please download Farbar Recovery Scan Tool and save it to your Desktop.
Note: You need to run the 64-bit Version so please ensure you download that one.
5. Run FRST64 by Right-Clicking on the file and choosing Run as administrator.
6. Copy and paste KB4507449 into the Search box and click the Search Registry button.
7. When the scan is complete a notepad window will open with the results. Please attach this to your next reply. It is saved on your desktop named SearchReg.txt.
 
Hi,
CMD command did run without any problems.
The result from FRST64 is attached.

Kind Regards
Per
 

Attachments

Hi!

Step#1 - FRST Fix
NOTICE: This script was written specifically for this user, for use on that particular machine. Running this on another machine may cause damage to your operating system
1. Please download Farbar Recovery Scan Tool and save it to your Desktop.
Note: You need to run the 64-bit Version so please ensure you download that one.
2. Download the attached fixlist.txt and save it to the Desktop.
Note. It's important that both files, FRST64 and fixlist.txt are in the same location or the fix will not work (in this case...the desktop).
3. Run FRST64 by Right-Clicking on the file and choosing Run as administrator.
4. Press the Fix button just once and wait. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
5. When finished FRST64 will generate a log on the Desktop (Fixlog.txt). Please post the contents of it in your reply.
6. Try updates again and attach CBS.log if any fail.
 

Attachments

Hi,
Here is the FixLog.txt everything was working without any problems.

Kind Regards
Per
 

Attachments

Hi,
I meant the fixlog was working perfect sadly the upgrade did not

Regards
Per
 
You must log in or register to reply here.

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top