Can't install new updates Windows 10

gianx80 · Oct 3, 2019

Hi guys,
I can't install new windows 10 updates. I get error 0x80244007.

Attached CBS.log and SFCFix.txt

Thank you in advance

Sysnative Windows Update · Oct 3, 2019

Hello and welcome!

Please attempt the update that previously failed and attach CBS.log afterwards.

I'd also recommend that you upgrade to the latest version of Windows 10.

gianx80 · Oct 3, 2019

My PC is managed by my organization. We all have an ancient version of McAfee that blocks the installation of the latest Windows build. IT department refuses to update McAfee and install the latest Windows build.

Could it be that WSUS is down? Because I can't even understand which is the update that fails.

Sysnative Windows Update · Oct 3, 2019

Ahhh, you are using WSUS, okay, let's gather more info:

Step#1 - FRST Fix
NOTICE: This script was written specifically for this user, for use on that particular machine. Running this on another machine may cause damage to your operating system
1. Please download Farbar Recovery Scan Tool and save it to your Desktop.
Note: You need to run the 64-bit Version so please ensure you download that one.
2. Download the attached fixlist.txt and save it to the Desktop.
Note. It's important that both files, FRST64 and fixlist.txt are in the same location or the fix will not work (in this case...the desktop).
3. Run FRST64 by Right-Clicking on the file and choosing Run as administrator.
4. Press the Fix button just once and wait. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
5. When finished FRST64 will generate a log on the Desktop (Fixlog.txt). Please post the contents of it in your reply.

gianx80 · Oct 14, 2019

I'm late (I was sick).

Today WSUS error is 0x8024a105

Fix result of Farbar Recovery Scan Tool (x64) Version: 12-10-2019 02
Ran by SabatoG (14-10-2019 15:56:22) Run:1
Running from C:\Users\***\Downloads
Loaded Profiles: SabatoG (Available Profiles: utente & Administrator & ***& ***& ***& ***)
Boot Mode: Normal
==============================================

fixlist content:
*****************
ExportKey: HKLM\Software\Policies\Microsoft\Windows\WindowsUpdate
*****************

================== ExportKey: ===================

[HKLM\Software\Policies\Microsoft\Windows\WindowsUpdate]
"DisableOSUpgrade"="1"
"ElevateNonAdmins"="1"
"WUServer"="http://***.***.it:8530"
"WUStatusServer"="http://***.***.it:8530"
[HKLM\Software\Policies\Microsoft\Windows\WindowsUpdate\AU]
"NoAutoUpdate"="0"
"NoAutoRebootWithLoggedOnUsers"="1"
"AutoInstallMinorUpdates"="1"
"NoAUShutdownOption"="1"
"NoAUAsDefaultShutdownOption"="1"
"RescheduleWaitTimeEnabled"="1"
"RescheduleWaitTime"="30"
"DetectionFrequencyEnabled"="1"
"DetectionFrequency"="4"
"RebootWarningTimeoutEnabled"="1"
"RebootWarningTimeout"="30"
"RebootRelaunchTimeoutEnabled"="1"
"RebootRelaunchTimeout"="10"
"UseWUServer"="1"
"AUOptions"="2"
"ScheduledInstallDay"="0"
"ScheduledInstallTime"="13"

=== End of ExportKey ===

==== End of Fixlog 15:56:22 ====

Sysnative Windows Update · Oct 14, 2019

Can you please fully export that key as backup and delete it followed by reboot.

Thanks.

gianx80 · Oct 14, 2019

Done, again

0x80244007

Sysnative Windows Update · Oct 14, 2019

Restart Windows in Safe Mode w/networking.

Download Windows Repair (All-in-One) Portable

Extract the tweaking.com_windows_repair_aio.zip to c:\Windows\TEMP the zip will extract to a folder called Tweaking.com - Windows Repair
Execute the file Repair_Windows.exe from the Tweaking.com - Windows Repair folder, accept the Security warning and the EULA
Click the button Jump To Repairs
Click the Open Repairs button to access the following screen:
Click the box All Repairs to uncheck all the boxes
Check only the following boxes:
- 16 - Repair Windows Updates
Check the box Restart/Shutdown System When Finished > Restart System
Click the Start Repairs button
When the system reboots, attempt the update again.

gianx80 · Oct 14, 2019

Still 0x80244007

Sysnative Windows Update · Oct 14, 2019

Step#1 - Capture Process Monitor Trace
1. Download and run Process Monitor. Leave this running while you perform the next steps.
2. Try updating the system just like you have in the past.
3. Stop Process Monitor as soon as it fails. You can simply do this by clicking the magnifying glass on the toolbar as shown below.

4. Select the File menu...Save... and save the file to your desktop. This is likely the default location. The name (unless changed) will be LogFile.PML. This is fine.
5. Zip up and provide the link to the LogFile.PML file as well as your CBS.log Examples of services to upload to are Dropbox or OneDrive or SendSpace.

gianx80 · Oct 14, 2019

Thank you here it goes

Logfile.zip

Sysnative Windows Update · Oct 14, 2019

Please run the following script:

https://gallery.technet.microsoft.c...b0/file/105824/1/Reset WSUS Authorization.bat

gianx80 · Oct 15, 2019

Still 0x80244007

Sysnative Windows Update · Oct 15, 2019

Please do the following:

https://support.microsoft.com/en-us/help/4096317/error-80244007-when-wsus-client-scans-for-updates

gianx80 · Oct 15, 2019

Update: updates from microsoft works (even if it tries to install 1903), from wsus don't.

Should I follow the least link you posted?

Sysnative Windows Update · Oct 15, 2019

Search

Search

Can't install new updates Windows 10

gianx80

Member

Attachments

Sysnative Windows Update

Inactive

gianx80

Member

Sysnative Windows Update

Inactive

Attachments

gianx80

Member

Sysnative Windows Update

Inactive

gianx80

Member

Sysnative Windows Update

Inactive

gianx80

Member

Sysnative Windows Update

Inactive

gianx80

Member

Sysnative Windows Update

Inactive

gianx80

Member

Sysnative Windows Update

Inactive

gianx80

Member

Sysnative Windows Update

Inactive