Can anybody please help me out in the error?

[komal]

I/O Port 0x00000000-0x0000001F Direct memory access controller
I/O Port 0x00000000-0x0000001F PCI bus

Memory Address 0xF1100000-0xF1103FFF Realtek PCIe FE Family Controller
Memory Address 0xF1100000-0xF1103FFF PCI standard PCI-to-PCI bridge

I/O Port 0x00000070-0x00000070 Motherboard resources
I/O Port 0x00000070-0x00000070 System CMOS/real time clock

I/O Port 0x000004D0-0x000004D1 Motherboard resources
I/O Port 0x000004D0-0x000004D1 Programmable interrupt controller

I/O Port 0x0000E000-0x0000E0FF Realtek PCIe FE Family Controller
I/O Port 0x0000E000-0x0000E0FF PCI standard PCI-to-PCI bridge

Memory Address 0xF7D00000-0xF7D0FFFF Dell Wireless 1702 802.11b/g/n
Memory Address 0xF7D00000-0xF7D0FFFF PCI standard PCI-to-PCI bridge

Memory Address 0xFF000000-0xFFFFFFFF Motherboard resources
Memory Address 0xFF000000-0xFFFFFFFF Intel(R) 82802 Firmware Hub Device

IRQ 16 Standard Enhanced PCI to USB Host Controller
IRQ 16 PCI standard PCI-to-PCI bridge

Memory Address 0xA0000-0xBFFFF PCI bus
Memory Address 0xA0000-0xBFFFF Intel(R) HD Graphics 3000

IRQ 19 Standard AHCI 1.0 Serial ATA Controller
IRQ 19 Dell Wireless 1702 802.11b/g/n
IRQ 19 PCI standard PCI-to-PCI bridge
IRQ 19 PCI standard PCI-to-PCI bridge

I/O Port 0x00000080-0x00000080 Motherboard resources
I/O Port 0x00000080-0x00000080 Motherboard resources

I/O Port 0x0000FFFF-0x0000FFFF Motherboard resources
I/O Port 0x0000FFFF-0x0000FFFF Motherboard resources

Memory Address 0x7F200000-0x7F200FFF Motherboard resources
Memory Address 0x7F200000-0x7F200FFF PCI bus

 

[komal]

I/O Port 0x00000000-0x0000001F Direct memory access controller
I/O Port 0x00000000-0x0000001F PCI bus

Memory Address 0xF1100000-0xF1103FFF Realtek PCIe FE Family Controller
Memory Address 0xF1100000-0xF1103FFF PCI standard PCI-to-PCI bridge

I/O Port 0x00000070-0x00000070 Motherboard resources
I/O Port 0x00000070-0x00000070 System CMOS/real time clock

I/O Port 0x000004D0-0x000004D1 Motherboard resources
I/O Port 0x000004D0-0x000004D1 Programmable interrupt controller

I/O Port 0x0000E000-0x0000E0FF Realtek PCIe FE Family Controller
I/O Port 0x0000E000-0x0000E0FF PCI standard PCI-to-PCI bridge

Memory Address 0xF7D00000-0xF7D0FFFF Dell Wireless 1702 802.11b/g/n
Memory Address 0xF7D00000-0xF7D0FFFF PCI standard PCI-to-PCI bridge

Memory Address 0xFF000000-0xFFFFFFFF Motherboard resources
Memory Address 0xFF000000-0xFFFFFFFF Intel(R) 82802 Firmware Hub Device

IRQ 16 Standard Enhanced PCI to USB Host Controller
IRQ 16 PCI standard PCI-to-PCI bridge

Memory Address 0xA0000-0xBFFFF PCI bus
Memory Address 0xA0000-0xBFFFF Intel(R) HD Graphics 3000

IRQ 19 Standard AHCI 1.0 Serial ATA Controller
IRQ 19 Dell Wireless 1702 802.11b/g/n
IRQ 19 PCI standard PCI-to-PCI bridge
IRQ 19 PCI standard PCI-to-PCI bridge

I/O Port 0x00000080-0x00000080 Motherboard resources
I/O Port 0x00000080-0x00000080 Motherboard resources

I/O Port 0x0000FFFF-0x0000FFFF Motherboard resources
I/O Port 0x0000FFFF-0x0000FFFF Motherboard resources

Memory Address 0x7F200000-0x7F200FFF Motherboard resources
Memory Address 0x7F200000-0x7F200FFF PCI bus

Sir my browser hangs within 2 min of using it.
I am using Windows 7 , 64 bit computer

 

[Sysnative Windows Update]

Hi!

Please start with the following:

GSmartControl
Follow the instructions below to check your SMART status with GSmartControl:

• Download the portable version of GSmartControl and save it on your Desktop;
• Extract the zip file to your Desktop. Open the folder gsmartcontrol-1.1.3-win64 which should be located on your Desktop and double-click gsmartcontrol.exe to launch the program.
• Identify your drive in the list (if recognized by the tool), and hover your mouse over it.
• You should see something called: SMART status. It will either read: Enabled, in which case you should do the following:
• Double-click on it to bring up its window (usually you'll find your drive by its size or its brand name);
• Go to the Self-Tests tab, then select Extended Self-test in the Test type drop-down list and click on Execute (this test can take a few hours to complete);
• Once the test is over, the results will be displayed at the bottom of the window. Please copy and paste these results in your next reply or take a screenshot;
• Also, go in the Attributes tab and if you have any entries highlighted in red or pink, take a screenshot of the GSmartControl window and attach it in your next reply;
• Please note: If the SMART Status reads: Unsupported, stop and let me know.
  
  

 

[komal]

Sir,

PFA.

 

[komal]

Sir,

PFA.

 

[Sysnative Windows Update]

Can you tell me more about your issue?