That is very strange. That is the only time I have ever seen the WHEA errors and it is hard to believe that it could be from heat or overclocking. Those popped up immediately after removing the XMP overclock from the RAM. This was also after the computer was off all night, so components would be cool. I run a Noctua NH-d15 on my CPU which is not overclocked and I have 2 140mm intake fans, and 2 140 mm exhaust. My ambient room temp is always 63 F. I will get one of those monitoring programs and see if I can log temps.
Here are the results from steps 1-12. I'm currently working on the others and will edit this post with additional results. I ran 4 passes of memtest86 yesterday with XMP enabled and speed decreased to 2666 Mhz. No errors were detected. I will run an additional 4 passes once I get to that step again.
Microsoft Windows [Version 10.0.19041.572]
(c) 2020 Microsoft Corporation. All rights reserved.
C:\WINDOWS\system32>sfc /scannow
Beginning system scan. This process will take some time.
Beginning verification phase of system scan.
Verification 100% complete.
Windows Resource Protection did not find any integrity violations.
C:\WINDOWS\system32>dism /online /cleanup-image /scanhealth
Deployment Image Servicing and Management tool
Version: 10.0.19041.572
Image Version: 10.0.19041.572
[==========================100.0%==========================] The component store is repairable.
The operation completed successfully.
C:\WINDOWS\system32>dism /online /cleanup-image /restorehealth
Deployment Image Servicing and Management tool
Version: 10.0.19041.572
Image Version: 10.0.19041.572
[==========================100.0%==========================]
Error: 0x800f081f
The source files could not be found.
Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see
Configure a Windows Repair Source.
The DISM log file can be found at C:\WINDOWS\Logs\DISM\dism.log
C:\WINDOWS\system32>sfc /scannow
Beginning system scan. This process will take some time.
Beginning verification phase of system scan.
Verification 100% complete.
Windows Resource Protection did not find any integrity violations.
C:\WINDOWS\system32>chkdsk /scan
The type of the file system is NTFS.
Stage 1: Examining basic file system structure ...
735232 file records processed.
File verification completed.
Phase duration (File record verification): 4.37 seconds.
11230 large file records processed.
Phase duration (Orphan file record recovery): 0.00 milliseconds.
0 bad file records processed.
Phase duration (Bad file record checking): 0.48 milliseconds.
Stage 2: Examining file name linkage ...
307 reparse records processed.
1012276 index entries processed.
Index verification completed.
Phase duration (Index verification): 11.07 seconds.
0 unindexed files scanned.
Phase duration (Orphan reconnection): 1.64 seconds.
0 unindexed files recovered to lost and found.
Phase duration (Orphan recovery to lost and found): 0.35 milliseconds.
307 reparse records processed.
Phase duration (Reparse point and Object ID verification): 4.19 milliseconds.
Stage 3: Examining security descriptors ...
Security descriptor verification completed.
Phase duration (Security descriptor verification): 39.68 milliseconds.
138523 data files processed.
Phase duration (Data attribute verification): 0.94 milliseconds.
CHKDSK is verifying Usn Journal...
34689496 USN bytes processed.
Usn Journal verification completed.
Phase duration (USN journal verification): 91.46 milliseconds.
Windows has scanned the file system and found no problems.
No further action is required.
976197631 KB total disk space.
495780452 KB in 547693 files.
366300 KB in 138524 indexes.
0 KB in bad sectors.
871619 KB in use by the system.
65536 KB occupied by the log file.
479179260 KB available on disk.
4096 bytes in each allocation unit.
244049407 total allocation units on disk.
119794815 allocation units available on disk.
Total duration: 17.24 seconds (17241 ms).
C:\WINDOWS\system32>wmic recoveros set autoreboot = false
Updating property(s) of '\\DESKTOP-0VJRK1H\ROOT\CIMV2:Win32_OSRecoveryConfiguration.Name="Microsoft Windows 10 Home|C:\\WINDOWS|\\Device\\Harddisk2\\Partition2"'
Property(s) update successful.
C:\WINDOWS\system32>wmic recoveros set DebugInfoType = 7
Updating property(s) of '\\DESKTOP-0VJRK1H\ROOT\CIMV2:Win32_OSRecoveryConfiguration.Name="Microsoft Windows 10 Home|C:\\WINDOWS|\\Device\\Harddisk2\\Partition2"'
Property(s) update successful.
C:\WINDOWS\system32>wmic recoveros get autoreboot
AutoReboot
FALSE
C:\WINDOWS\system32>wmic recoveros get DebugInfoType
DebugInfoType
7
C:\WINDOWS\system32>bcdedit /enum {badmemory}
RAM Defects
-----------
identifier {badmemory}
C:\WINDOWS\system32>