BSOD of course - Windows 7 x64

P

psytag

New member
Joined
Jun 1, 2014
Posts
3
As you might have guessed.....

i have a Windows 7 64 bit system
The history is a little more complicated: recently i made an upgrade to my system, putting a Intel Pentium D 925 processor an 4 GB of RAM. Originally i had a Intel Pentium 4 with 1GB of RAM. The system is about 6 years old and the re-instal is only a few days old.

Intel Pentium D 925 4M Cache, 3.00GHz, 800 MHz FSB (originally Intel Pentium 4 supporting HT 3.00GHz, 1M Cache, 800 MHz FSB
NVIDIA GeForce7300 SE/7200GS
Gigabyte GA-945GCM-S2C
The rest i have no ideea, it's a destop.

Thank you!
 

Attachments

Hi,

All of the attached DMP files are of the CRITICAL_STRUCTURE_CORRUPTION (109) bug check.

This indicates that the kernel has detected critical kernel code or data corruption.

There are generally two causes for this bug check:

  1. A driver has inadvertently, or deliberately, modified critical kernel code or data. Microsoft Windows Server 2003 with Service Pack 1 (SP1) and later versions of Windows for x64-based computers do not allow the kernel to be patched except through authorized Microsoft-originated hot patches. For more information, see Patching Policy for x64-based Systems.
  2. A hardware corruption occurred. For example, the kernel code or data could have been stored in memory that failed.


1. Uninstall IObit ASAP. I definitely recommend you read this as well - https://forums.malwarebytes.org/index.php?showtopic=29681

2. Uninstall Smart Defrag ASAP.

3. If the crashes continue after the above, please enable Driver Verifier:
Driver Verifier:

What is Driver Verifier?

Driver Verifier monitors Windows kernel-mode drivers, graphics drivers, and even 3rd party drivers to detect illegal function calls or actions that might corrupt the system. Driver Verifier can subject the Windows drivers to a variety of stresses and tests to find improper behavior.

Essentially, if there's a 3rd party driver believed to be causing the issues at hand, enabling Driver Verifier will help us see which specific driver is causing the problem.

Before enabling Driver Verifier, it is recommended to create a System Restore Point:

Vista - START | type rstrui - create a restore point
Windows 7 - START | type create | select "Create a Restore Point"
Windows 8/8.1 - Restore Point - Create in Windows 8

How to enable Driver Verifier:

Start > type "verifier" without the quotes > Select the following options -

1. Select - "Create custom settings (for code developers)"
2. Select - "Select individual settings from a full list"
3. Check the following boxes -
- Special Pool
- Pool Tracking
- Force IRQL Checking
- Deadlock Detection
- Security Checks (Windows 7 & 8/8.1)
- DDI compliance checking (Windows 8/8.1)
- Miscellaneous Checks
4. Select - "Select driver names from a list"
5. Click on the "Provider" tab. This will sort all of the drivers by the provider.
6. Check EVERY box that is NOT provided by Microsoft / Microsoft Corporation.
7. Click on Finish.
8. Restart.

Important information regarding Driver Verifier:

- If Driver Verifier finds a violation, the system will BSOD. To expand on this a bit more for the interested, specifically what Driver Verifier actually does is it looks for any driver making illegal function calls, causing memory leaks, etc. When and/if this happens, system corruption occurs if allowed to continue. When Driver Verifier is enabled per my instructions above, it is monitoring all 3rd party drivers (as we have it set that way) and when it catches a driver attempting to do this, it will quickly flag that driver as being a troublemaker, and bring down the system safely before any corruption can occur.

- After enabling Driver Verifier and restarting the system, depending on the culprit, if for example the driver is on start-up, you may not be able to get back into normal Windows because Driver Verifier will detect it in violation almost straight away, and as stated above, that will cause / force a BSOD.

If this happens, do not panic, do the following:

- Boot into Safe Mode by repeatedly tapping the F8 key during boot-up.

- Once in Safe Mode - Start > Search > type "cmd" without the quotes.

- To turn off Driver Verifier, type in cmd "verifier /reset" without the quotes.
・ Restart and boot into normal Windows.

If your OS became corrupt or you cannot boot into Windows after disabling verifier via Safe Mode:

- Boot into Safe Mode by repeatedly tapping the F8 key during boot-up.

- Once in Safe Mode - Start > type "system restore" without the quotes.

- Choose the restore point you created earlier.

-- Note that Safe Mode for Windows 8/8.1 is a bit different, and you may need to try different methods: 5 Ways to Boot into Safe Mode in Windows 8 & Windows 8.1

How long should I keep Driver Verifier enabled for?

I recommend keeping it enabled for at least 24 hours. If you don't BSOD by then, disable Driver Verifier. I will usually say whether or not I'd like for you to keep it enabled any longer.

My system BSOD'd with Driver Verifier enabled, where can I find the crash dumps?

- If you have the system set to generate Small Memory Dumps, they will be located in %systemroot%\Minidump.

- If you have the system set to generate Kernel-Memory Dumps, it will be located in %systemroot% and labeled MEMORY.DMP.

Any other questions can most likely be answered by this article:

Using Driver Verifier to identify issues with Windows drivers for advanced users

Regards,

Patrick
 
Hi, i know it's bean a while but i haven't manage to solve the issue. I reinstalled my system and it didn't work. I have been busy and a haven't had the time to try to fix it, but now i will put up the Driver Verifier and wait for a crash.
 
Same bug check.

1. Remove and replace ESET with MSE for temporary troubleshooting purposes as I'd like to see if it's causing kernel corruption:

ESET removal - How do I uninstall or reinstall ESET Smart Security/ESET NOD32 Antivirus? - ESET Knowledgebase


MSE - Microsoft Security Essentials - Microsoft Windows

2. If you still crash after the above, please run Memtest for NO LESS than ~8 passes (several hours):

Memtest86+:

Download Memtest86+ here:

http://www.memtest.org/

Which should I download?

You can either download the pre-compiled ISO that you would burn to a CD and then boot from the CD, or you can download the auto-installer for the USB key. What this will do is format your USB drive, make it a bootable device, and then install the necessary files. Both do the same job, it's just up to you which you choose, or which you have available (whether it's CD or USB).

Do note that some older generation motherboards do not support USB-based booting, therefore your only option is CD (or Floppy if you really wanted to).

How Memtest works:

Memtest86 writes a series of test patterns to most memory addresses, reads back the data written, and compares it for errors.

The default pass does 9 different tests, varying in access patterns and test data. A tenth test, bit fade, is selectable from the menu. It writes all memory with zeroes, then sleeps for 90 minutes before checking to see if bits have changed (perhaps because of refresh problems). This is repeated with all ones for a total time of 3 hours per pass.

Many chipsets can report RAM speeds and timings via SPD (Serial Presence Detect) or EPP (Enhanced Performance Profiles), and some even support changing the expected memory speed. If the expected memory speed is overclocked, Memtest86 can test that memory performance is error-free with these faster settings.

Some hardware is able to report the "PAT status" (PAT: enabled or PAT: disabled). This is a reference to Intel Performance acceleration technology; there may be BIOS settings which affect this aspect of memory timing.

This information, if available to the program, can be displayed via a menu option.

Any other questions, they can most likely be answered by reading this great guide here:

FAQ : please read before posting

Regards,

Patrick
 

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top