Y yaboyuzi94 New member Joined Aug 1, 2012 Posts 1 Aug 1, 2012 #1 bsod comes up every time i wake up from sleep or hibernation mode View attachment BSOD info.zip
P Patrick Sysnative Staff Joined Jun 7, 2012 Posts 4,618 Aug 1, 2012 #2 Hello yaboyuzi94 and welcome to Sysnative! I've taken a look at your attached dump, it's a 1000007E: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M bugcheck pointing to the culprit MijXfilt.sys, which is the MotioninJoy simulate Xbox 360 controller (virtual Xinput device) driver: http://www.motioninjoy.com/blog/motioninjoy-simulate-xbox-360-controller-virtual-xinput-device To my knowledge, using this specific driver rather than the official drivers is not recommended... I've seen MijXfilt.sys tons in the past in cases of BSOD analysis. Remove this driver and install the official driver: http://www.microsoft.com/hardware/en-us/p/xbox-360-controller-for-windows/52A-00004#support As far as I know, removing MotioninJoy via add / remover programs uninstall list doesn't work and the driver still remains, so you must uninstall it via the uninstall list, AND THEN navigate to c:\windows\system32\drivers and delete MijXfilt.sys. After taking a look at the loaded modules list, dtsoftbus01.sys is listed, this is the Daemon Tools driver. Daemon Tools is a very popular causer of BSOD's in W7, so I'd recommend uninstalling it and replacing it with a different visualization program such as: PowerISO, ImgBurn, MagicISO, etc. Regards, Patrick Last edited: Aug 1, 2012
Hello yaboyuzi94 and welcome to Sysnative! I've taken a look at your attached dump, it's a 1000007E: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M bugcheck pointing to the culprit MijXfilt.sys, which is the MotioninJoy simulate Xbox 360 controller (virtual Xinput device) driver: http://www.motioninjoy.com/blog/motioninjoy-simulate-xbox-360-controller-virtual-xinput-device To my knowledge, using this specific driver rather than the official drivers is not recommended... I've seen MijXfilt.sys tons in the past in cases of BSOD analysis. Remove this driver and install the official driver: http://www.microsoft.com/hardware/en-us/p/xbox-360-controller-for-windows/52A-00004#support As far as I know, removing MotioninJoy via add / remover programs uninstall list doesn't work and the driver still remains, so you must uninstall it via the uninstall list, AND THEN navigate to c:\windows\system32\drivers and delete MijXfilt.sys. After taking a look at the loaded modules list, dtsoftbus01.sys is listed, this is the Daemon Tools driver. Daemon Tools is a very popular causer of BSOD's in W7, so I'd recommend uninstalling it and replacing it with a different visualization program such as: PowerISO, ImgBurn, MagicISO, etc. Regards, Patrick