BSOD and blank screen

[Juan Martinez]

Problem is BSOD or total blank screen after about 1-2 minutes. Many times system freezes.
I have run 3 separate anti virus malware programs. Run Chk /scannow always indicating files that are corrupt and cannot be repaired by SFC. Run SFCfix many times always indicating corrupt dlls that cannot be repaired. Most times identifys
C:\Windows\winsxs\amd64_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.18837_none_fa3b1e3d17594757\comctl32.dll
as corrupt.
Attempted to repair using install disk, but OS is not recognized due to Sp1 upgrade. Almost everything is shut down on start. System fails in Safe mode.
OS is Windows 7 64 bit Prof Sp1. CPU is Intel i7 6700 16 Gbit ram.
CBS log downloaded to Google Drive:
https://drive.google.com/drive/folders/1wjB1rdB5CPLnYKaU5M1eDxU0rK-dsiGR?usp=sharing
Your help will be greatly appreciated

 

[jcgriff2]

Hi. . .

Run RAM + HDD diagnostic tests.

RAM - memtest86+ - run 1 stick at a time; alternate the slots - Test RAM With Memtest86+

HDD - SeaTools for DOS, LONG test - https://www.sysnative.com/forums/hardware-tutorials/4072-hard-drive-hdd-diagnostics.html

Regards. . .

jcgriff2

 

[Juan Martinez]

Looks like the problem was faulty RAM. Still trying to sort things out. Asus MOBO is extremely difficult to boot from Optic or USB drive. In desperation purchased 8Gb of RAM and installed. System now runs SFC.
Thank you thank you to the Forum and it's members.
Juan