[SOLVED] BSOD - A clock interrupt was not received on the secondary processor - Widows 7 x64

[jeffd]

Hey hows everyone doing,

I get BSOD a lot, especially when I try to export video or run certain programs such as games.

I am attaching the two zip files that were indicated in the instructions.

Thank you for your help and time!

 

[MichaelB]

re: BSOD - A clock interrupt was not received on the secondary processor - Widows 7 x64

Unfortunately there are no Dumps, but the Driverlist shows Daemontools from 2012 and deinstall that first. They may produce Stop 101 Error.

https://www.sysnative.com/forums/bsod-crashes-kernel-debugging/9599-bsods-but-no-dump-files.html
why are no dump files created.

 

[jeffd]

re: BSOD - A clock interrupt was not received on the secondary processor - Widows 7 x64

Whats up Mike, I uninstalled DameonTools Lite, PC will still freeze when attempting to export video.

I searched for dump file in C:\Windows\MEMORY.DMP and also C:\Windows\minidump but i didnot find any files

 

[Patrick]

re: BSOD - A clock interrupt was not received on the secondary processor - Widows 7 x64

If you're getting 0x124's or 0x101's, dumps won't generate a lot of times due to the nature of the bug check.

1. Windows key + Pause key. This should bring up System. Click Advanced System Settings on the left > Advanced > Performance > Settings > Advanced > Ensure there's a check-mark for 'Automatically manage paging file size for all drives'.

2. Windows key + Pause key. This should bring up System. Click Advanced System Settings on the left > Advanced > Startup and Recovery > Settings > System Failure > ensure there is a check mark next to 'Write an event to the system log'.

3. Double check that the WERS is ENABLED:

Start > Search > type services.msc > Under the name tab, find Windows Error Reporting Service > If the status of the service is not Started then right click it and select Start. Also ensure that under Startup Type it is set to Automatic rather than Manual. You can do this by right clicking it, selecting properties, and under General selecting startup type to 'Automatic', and then click Apply.

See if all of that is in place.

 

[jeffd]

Solved: lol as you can see the heat sync was caked with a ton of dust. I cleaned it and it solved the problem,