[SOLVED] Amd64\CNBJ2530.DPB do not match actual file

S

saaish

Member
Joined
Aug 14, 2020
Posts
16
Hello friends,

I tried installing apache on my laptop (Windows 8.1 x64) but i am getting error regarding "procedure entry point could not be found in pcre.dll". To resolve this, first i did sfc scan then dism and then SFCFix.

CBS log file indicated "2020-08-15 18:50:53, Info CSI 0000000b Hashes for file member \SystemRoot\WinSxS\amd64_prncacla.inf_31bf3856ad364e35_6.3.9600.16384_none_9590ba64d5b91f79\Amd64\CNBJ2530.DPB do not match actual file [l:36{18}]"Amd64\CNBJ2530.DPB" :
Found: {l:32 b:5lZjnEFGuk/eKvIRPXi8LFwT/yVe78gXqDsjL0NSpWA=} Expected: {l:32 b:n520k714Uu3utHa5JGQ6HQYbZphKhlMWq5pEmfnCDuw=}

which seemed to be resolved with sfcfix "FIXED: Performed DISM repair on file Amd64\CNBJ2530.DPB of version 6.3.9600.16384."

but unfortunately problem is not resolved. When i searched for this, i found exactly same thread on this forum. Link

I have attached files as per your guidelines.

Please help to resolve this issue.

Thanks,
Saaish
 

Attachments

Hello and welcome,

Follow the instructions below please.

WARNING! The following fix is specific to the user's system in this thread only. No one else should follow these instructions, as it could damage your system.
  • Download the attachment SFCFix.zip and save it on your desktop.
  • Save any work you have open, and close all programs.
  • Drag the SFCFix.zip file over the SFCFix.exe executable and release it.
    1p8eDnI.gif
  • SFCFix will launch, let it complete.
  • Once done, a file will appear on your desktop, called SFCFix.txt.
  • Open the file, then copy and paste its content in your next reply.
 

Attachments

Thanks a lot PeterJ.

The sfc scan is clear now. Please find attached files.

Can you please extend the help for error which still persists with apache ? "Procedure entry point could not be located in pcre.dll"
It says "the Windows Event Viewer for more clues". So, I have also attached event viewer log in case required.

Thanks,
Saaish
 

Attachments

FRST Scan:
  1. Download the Farbar Recovery Scan Tool and save it to your Desktop:
    64-bit: Downloading Farbar Recovery Scan Tool
  2. Right-click to run the tool as administrator. When the tool opens click Yes to disclaimer.
  3. Note: Ensure that the Addition.txt check box is checked at the bottom of the form within the Optional Scan area.
  4. Press the Scan button.
  5. Please wait for the tool to finish. It will produce two logfiles called FRST.txt and Addition.txt in the same directory the tool is run from (which should be the desktop)
  6. Post the logfiles FRST.txt and Addition.txt as attachment in your next reply.
 
It seems like Windows is not activated or used illegal.
It is against the rules to help people with an illegal operating system or other illegally used programs.
 
Sorry PeterJ for not ensuing pre-requisites.

I have reran the FRST scan after updating genuine product key for windows. Please find attached files.

Thanks,
Saaish
 

Attachments

Step 1:
Uninstall "Outbyte PC Repair"
Restart the machine when prompted.

Step 2: Update Java
Open this web page to download the latest version. Click 'Free Java Download' and then 'Agree and Start Free Download'.
Download the installer jxpiinstall.exe and run it.
Click Install and then Install>.
Warning: You may get a choice to install additional software and/or allow to change your browser settings. Uncheck all that!
If you get a pop-up saying "Out-of-date Java versions detected.", click Uninstall>. This will remove the outdated Java versions.
Check that Java 7 Update 51 is removed.

Step 3:
Warning: This script was written specifically for this user, for use on that particular machine. Do not run this script on another machine.
  1. Download the attachment fixlist.txt and save it to your desktop.
  2. Right-click on FRST64.exe and select "Run as administrator".
  3. Press the Fix button.
  4. The tool will now process fixlist.txt.
  5. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
  6. When finished, a log called Fixlog.txt will appear in the same directory the tool is run from.
  7. Post the logfile Fixlog.txt as attachment in your next reply.
 

Attachments

Hello PeterJ,
Outbyte is removed.
I have downloaded the Java 8 update 261 and installed. But the jxpiinstall.exe showed below error.

jxpiinstall failed.PNG

then i manually removed Java 7 Update 51. I think that is fine please confirm from your side.

Please find attachment for Fixlog.txt.
 

Attachments

I downloaded jxpiinstall.exe from above link but i got below error.

1597683523900.png

Actually my situation is, my laptop is configured for organization's network in this corona pandemic as an urgent & immediate solution. And I need to use VPN for every browsing. So I think that is the problem. Can you please suggest any alternate installation option or any other solution ?
 
Can you install the 64bit version with the link provided in my previous post ?
 
Great, Any remaining issues ?
 
The problem with apache which says,
"Procedure entry point could not be located in pcre.dll" is not yet resolved.

Can you please suggest any solution ?
 
FRST File Search
  1. Right-click on the file FRST64.exe and choose Run as administrator.
  2. Copy and paste pcre.dll into the Search box and click the Search Files button.
  3. When the scan is complete, a message will display that 'Search.txt' is saved in the same folder FRST was started from. Notepad will open this file also.
  4. Close Notepad and attach the file 'Search.txt' to your next reply.
 
Which version of Apache are you trying to install ?

Warning: This script was written specifically for this user, for use on that particular machine. Do not run this script on another machine.
  1. Download the attachment fixlist.txt and save it to your desktop.
  2. Right-click on FRST64.exe and select "Run as administrator".
  3. Press the Fix button.
  4. The tool will now process fixlist.txt.
  5. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
  6. When finished, a log called Fixlog.txt will appear in the same directory the tool is run from.
  7. Post the logfile Fixlog.txt as attachment in your next reply.
 

Attachments

You must log in or register to reply here.

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top