[SOLVED] [7SP1Ult x64] After update to IE11 & admin templates, 2 Corrupted Winsxs files.

D

DKW3

Contributor
Joined
Feb 8, 2015
Posts
129
Location
San Diego, CA
Hi,

I haven't been here for a while, in fact my desktop is in storage & for now I got a refurbed bare Dell E5610 Latitude i7 laptop that I installed my dvd copy win.7 64 Ult. UEFI using a Macrium PE, which was clean until I did the update to ie 11 with all the required prerequsites last week.

It was when I updated the corresponding ie11 administrative templates that I got into the trouble that I've mostly taken care over 2 days with a few runs of sfc /scannow, SFCfix.exe SURT, & fixing win.updates via tweaking-all-in-one; I'm now down to just 2 corrupted files listed below (out of the orginal 54), but I don't want to push my luck in guessing how to fix them. If you could please help with these, I'd be appreciative- the wetransfer link with my component file is also below Thanks.

CORRUPT: C:\Windows\winsxs\amd64_microsoft-windows-inetres-adm_31bf3856ad364e35_11.2.9600.17843_none_d0bda218acffcc59\inetres.admx

CORRUPT: C:\Windows\winsxs\amd64_microsoft-windows-terminalserver-adm_31bf3856ad364e35_6.1.7601.17514_none_e09a4d44afffdbed\TerminalServer.admx

WeTransfer Link to Components file- WeTransfer
 
Re: 2 Corrupted Winsys component files after update to ie 11 & updated admin template

Actually, the laptop is a Dell Latitude E6510 i7 with 4 virtual cores, 2 physical cores.
 
Re: 2 Corrupted Winsys component files after update to ie 11 & updated admin template

I just saw it today; running gpedit.msc is coming up with many parsing errors, guess this will continue until file 1 can be fixed...
 
Re: [7SP1Ult x64] After update to IE11 & admin templates, 2 Corrupted Winsxs files.

Hello and welcome!

SFCFix Script

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.


  1. Download SFCFix.exe (by niemiro) and save this to your Desktop.
  2. Download the attached file, SFCFixScript.txt, and save this to your Desktop. Ensure that this file is named SFCFixScript.txt - do not rename it.
  3. Save any open documents and close all open windows.
  4. On your Desktop, you should see two files: SFCFix.exe and SFCFixScript.txt.
  5. Drag the file SFCFixScript.txt onto the file SFCFix.exe and release it.
  6. SFCFix will now process the script.
  7. Upon completion, a log should be created on your Desktop: SFCFix.txt.
  8. Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this into your next post for me to analyse please - put [CODE][/CODE] tags around the log to break up the text.
 

Attachments

Re: [7SP1Ult x64] After update to IE11 & admin templates, 2 Corrupted Winsxs files.

Code: 
SFCFix version 3.0.0.0 by niemiro.
Start time: 2018-01-28 23:32:32.797
Microsoft Windows 7 Service Pack 1 - amd64
Using .txt script file at C:\Users\DKW's Lap\Desktop\SFCFixScript.txt [0]




Trace::
Successfully traced component amd64_microsoft-windows-inetres-adm_31bf3856ad364e35_11.2.9600.17843_none_d0bda218acffcc59.
    Microsoft-Windows-InternetExplorer-VistaPlus-Update~31bf3856ad364e35~amd64~~11.2.9600.16428.Internet-Explorer-amd64

Successfully traced component amd64_microsoft-windows-terminalserver-adm_31bf3856ad364e35_6.1.7601.17514_none_e09a4d44afffdbed.
    Microsoft-Windows-GroupPolicy-ClientTools-Package~31bf3856ad364e35~amd64~~6.1.7601.17514.Microsoft-Windows-GroupPolicy-ClientTools-Binaries-Update
Trace:: directive completed successfully.




Successfully processed all directives.
SFCFix version 3.0.0.0 by niemiro has completed.
Currently storing 52 datablocks.
Finish time: 2018-01-28 23:32:32.859
Script hash: hY6NTnv16TA+9QJIjnN63qaMIIxC4I/ETu8uUIZuOx4=
----------------------EOF-----------------------
 
Re: [7SP1Ult x64] After update to IE11 & admin templates, 2 Corrupted Winsxs files.

Hi,

Another system??? I don't understand, I thought this would be simple for just 2 files, what is the diagnosis??
 
Re: [7SP1Ult x64] After update to IE11 & admin templates, 2 Corrupted Winsxs files.

Yes, you are indeed missing two files, that's why I was wondering if you maybe have another system handy on which you could look for the two files. If not, that's okay, I'll manage somehow.
 
Re: [7SP1Ult x64] After update to IE11 & admin templates, 2 Corrupted Winsxs files.

Thanks. It's probably missing the same 2 files, but I'll check the Macrium back I did a short time ago just in case...
 
Re: [7SP1Ult x64] After update to IE11 & admin templates, 2 Corrupted Winsxs files.

Got a blank with the main one, but think I lucked-out with the Terminal one, please see wetransfer link- WeTransfer
 
Re: [7SP1Ult x64] After update to IE11 & admin templates, 2 Corrupted Winsxs files.

SFCFix Script

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.


  1. Download SFCFix.exe (by niemiro) and save this to your Desktop.
  2. Download the file below, SFCFix.zip, and save this to your Desktop. Ensure that this file is named SFCFix.zip - do not rename it.
  3. Save any open documents and close all open windows.
  4. On your Desktop, you should see two files: SFCFix.exe and SFCFix.zip.
  5. Drag the file SFCFix.zip onto the file SFCFix.exe and release it.
  6. SFCFix will now process the script.
  7. Upon completion, a file should be created on your Desktop: SFCFix.txt.
  8. Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this file into your next post for me to analyse please - put [CODE][/CODE] tags around the log to break up the text.




SFC Scan


  1. Click on the Start button and in the search box, type Command Prompt
  2. When you see Command Prompt on the list, right-click on it and select Run as administrator
  3. When command prompt opens, copy and paste the following commands into it, press enter after each

    sfc /scannow

    Wait for this to finish before you continue

    copy %windir%\logs\cbs\cbs.log %userprofile%\Desktop\cbs.txt
  4. This will create a file, cbs.txt on your Desktop. Please attach this to your next post.
 

Attachments

Re: [7SP1Ult x64] After update to IE11 & admin templates, 2 Corrupted Winsxs files.

Done,

But hate to write, things now look much worse!! See wetransfer link for sfc.fix and cbs files-https://we.tl/cGaUiy08UR
 
Re: [7SP1Ult x64] After update to IE11 & admin templates, 2 Corrupted Winsxs files.

I can't access my Dell again until tomorrow, but just pulled out the Bargain Bytes 10-30-17 system checklist sheet for the refurbed, bare laptop (got it via eBay) and other than the HDD being checked off as 320gb, "Internal Issues" are checked off as being "None". I can guarantee that before I upgraded from ie9 to ie11 a couple of weeks ago, this machine was clean, even with my turning off anti-malware bytes the past few weeks in order to use VM Ware & to update, period. Hope you can successfully steer me through this without me being forced into a last resort repair-install, I did that 2 times with my desktop, & it only made things worse. Thanks.
 
Last edited:
Re: [7SP1Ult x64] After update to IE11 & admin templates, 2 Corrupted Winsxs files.

First batch:

SFCFix Script

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.



  1. Download SFCFix.exe (by niemiro) and save this to your Desktop.
  2. Download the file below, SFCFix.zip, and save this to your Desktop. Ensure that this file is named SFCFix.zip - do not rename it.
  3. Save any open documents and close all open windows.
  4. On your Desktop, you should see two files: SFCFix.exe and SFCFix.zip.
  5. Drag the file SFCFix.zip onto the file SFCFix.exe and release it.
  6. SFCFix will now process the script.
  7. Upon completion, a file should be created on your Desktop: SFCFix.txt.
  8. Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this file into your next post for me to analyse please - put
    Code:
    tags around the log to break up the text.





SFC Scan



  1. Click on the Start button and in the search box, type Command Prompt
  2. When you see Command Prompt on the list, right-click on it and select Run as administrator
  3. When command prompt opens, copy and paste the following commands into it, press enter after each

    sfc /scannow

    Wait for this to finish before you continue

    copy %windir%\logs\cbs\cbs.log %userprofile%\Desktop\cbs.txt
  4. This will create a file, cbs.txt on your Desktop. Please attach this to your next post.
 

Attachments

Re: [7SP1Ult x64] After update to IE11 & admin templates, 2 Corrupted Winsxs files.

Okay, Thanks a million.

I was doing a chkdsk /r /f via my Macrium Recovery boot (explorer cmd) before I saw this, & it DID have to make some repairs.

Though a detailed log couldn't be saved (due to dismounted drive handles), I opened up notepad and saved the cmd results, which I included with what you requested;here is the wetransfer link to the 3 txt files-https://we.tl/304VTTzzOr
 
Re: [7SP1Ult x64] After update to IE11 & admin templates, 2 Corrupted Winsxs files.

GSmartControl
Follow the instructions below to test your hard drive health with GSmartControl:


For now I only want a screenshot of you Attributes tab.



  • Download GSmartControl and save it on your Desktop;
  • Execute gsmartcontrol.exe; Let the install complete and launch the programme.
  • Identify your drive in the list, and double-click on it to bring up it's window (usually you'll find your drive by it's size or it's brand name);
  • Go in the Perform Tests tab, then select Extended Self-test in the Test type drop-down list and click on Execute (this test can take a few hours to complete);
  • Once the test is over, the results will be displayed at the bottom of the window. Please copy and paste these results in your next reply;
  • Also, go in the Attributes tab and if you have any entries highlighted in red or pink, take a screenshot of the GSmartControl window and attach it in your next reply;
    info_failing.png
 
Re: [7SP1Ult x64] After update to IE11 & admin templates, 2 Corrupted Winsxs files.

Hi,

Well, I just completed the GSmartControl Extended Self-test, & just below as per your request, are the results output (nothing was highlighted in "Attributes"):

smartctl 6.5 2016-05-07 r4318 [i686-w64-mingw32-win7(64)-sp1] (sf-6.5-1)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, smartmontools

=== START OF INFORMATION SECTION ===
Model Family: Hitachi Travelstar 5K500.B
Device Model: Hitachi HTS545032B9A300
Serial Number: 091003PBH306Q6D3S0JX
LU WWN Device Id: 5 000cca 5a0cfcb05
Firmware Version: PB3OC60F
User Capacity: 320,072,933,376 bytes [320 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Fri Feb 02 14:06:45 2018 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Disabled
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, frozen [SEC2]

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 645) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 106) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0
2 Throughput_Performance P-S--- 100 100 040 - 0
3 Spin_Up_Time POS--- 158 158 033 - 2
4 Start_Stop_Count -O--C- 096 096 000 - 6619
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0
7 Seek_Error_Rate PO-R-- 100 100 067 - 0
8 Seek_Time_Performance P-S--- 100 100 040 - 0
9 Power_On_Hours -O--C- 089 089 000 - 4820
10 Spin_Retry_Count PO--C- 100 100 060 - 0
12 Power_Cycle_Count -O--CK 097 097 000 - 6097
191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0
192 Power-Off_Retract_Count -O--CK 100 100 000 - 49
193 Load_Cycle_Count -O--C- 088 088 000 - 120352
194 Temperature_Celsius -O---- 144 144 000 - 38 (Min/Max 13/49)
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O---K 100 100 000 - 0
198 Offline_Uncorrectable ---R-- 100 100 000 - 0
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0
223 Load_Retry_Count -O-R-- 100 100 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning

General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 1 Comprehensive SMART error log
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 SATA NCQ Queued Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
Device Error Count: 538 (device log contains only the most recent 4 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 538 [1] occurred at disk power-on lifetime: 4818 hours (200 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 01 00 00 25 42 ea b0 40 00 Error: IDNF 1 sectors at LBA = 0x2542eab0 = 625142448

Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 01 00 00 25 42 ea b0 40 00 00:00:12.300 READ DMA EXT
c8 00 00 00 01 00 00 00 00 00 01 40 00 00:00:12.300 READ DMA
c8 00 00 00 01 00 00 00 00 00 00 40 00 00:00:12.200 READ DMA
c8 00 00 00 01 00 00 00 00 00 00 40 00 00:00:12.200 READ DMA
b0 00 da 00 00 00 00 00 c2 4f 00 40 00 00:00:11.000 SMART RETURN STATUS

Error 537 [0] occurred at disk power-on lifetime: 4814 hours (200 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 01 00 00 25 42 ea b0 40 00 Error: IDNF 1 sectors at LBA = 0x2542eab0 = 625142448

Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 01 00 00 25 42 ea b0 40 00 00:04:01.300 READ DMA EXT
c8 00 00 00 01 00 00 00 00 00 01 40 00 00:04:01.300 READ DMA
c8 00 00 00 01 00 00 00 00 00 00 40 00 00:04:01.300 READ DMA
c8 00 00 00 01 00 00 00 00 00 00 40 00 00:04:01.300 READ DMA
b0 00 da 00 00 00 00 00 c2 4f 00 40 00 00:04:00.400 SMART RETURN STATUS

Error 536 [3] occurred at disk power-on lifetime: 4814 hours (200 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 01 00 00 25 42 ea b0 40 00 Error: IDNF 1 sectors at LBA = 0x2542eab0 = 625142448

Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 01 00 00 25 42 ea b0 40 00 00:00:13.200 READ DMA EXT
c8 00 00 00 01 00 00 00 00 00 01 40 00 00:00:13.200 READ DMA
c8 00 00 00 01 00 00 00 00 00 00 40 00 00:00:13.200 READ DMA
c8 00 00 00 01 00 00 00 00 00 00 40 00 00:00:13.100 READ DMA
b0 00 da 00 00 00 00 00 c2 4f 00 40 00 00:00:12.000 SMART RETURN STATUS

Error 535 [2] occurred at disk power-on lifetime: 4814 hours (200 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 01 00 00 25 42 ea b0 40 00 Error: IDNF 1 sectors at LBA = 0x2542eab0 = 625142448

Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 01 00 00 25 42 ea b0 40 00 00:00:10.900 READ DMA EXT
c8 00 00 00 01 00 00 00 00 00 01 40 00 00:00:10.900 READ DMA
c8 00 00 00 01 00 00 00 00 00 00 40 00 00:00:10.900 READ DMA
c8 00 00 00 01 00 00 00 00 00 00 40 00 00:00:10.900 READ DMA
b0 00 da 00 00 00 00 00 c2 4f 00 40 00 00:00:09.700 SMART RETURN STATUS

SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 4820 -
# 2 Short offline Completed without error 00% 4324 -
# 3 Short offline Completed without error 00% 4290 -

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version: 3
SCT Version (vendor specific): 256 (0x0100)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 38 Celsius
Power Cycle Min/Max Temperature: 28/38 Celsius
Lifetime Min/Max Temperature: 13/49 Celsius
Lifetime Average Temperature: 35 Celsius
Under/Over Temperature Limit Count: 0/0

SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 5/60 Celsius
Min/Max Temperature Limit: -40/65 Celsius
Temperature History Size (Index): 478 (237)

Index Estimated Time Temperature Celsius
238 2018-02-02 06:09 41 **********************
239 2018-02-02 06:10 41 **********************
240 2018-02-02 06:11 41 **********************
241 2018-02-02 06:12 42 ***********************
... ..( 67 skipped). .. ***********************
309 2018-02-02 07:20 42 ***********************
310 2018-02-02 07:21 41 **********************
311 2018-02-02 07:22 41 **********************
312 2018-02-02 07:23 41 **********************
313 2018-02-02 07:24 40 *********************
314 2018-02-02 07:25 40 *********************
315 2018-02-02 07:26 39 ********************
316 2018-02-02 07:27 39 ********************
317 2018-02-02 07:28 38 *******************
... ..( 4 skipped). .. *******************
322 2018-02-02 07:33 38 *******************
323 2018-02-02 07:34 37 ******************
... ..( 4 skipped). .. ******************
328 2018-02-02 07:39 37 ******************
329 2018-02-02 07:40 36 *****************
... ..( 5 skipped). .. *****************
335 2018-02-02 07:46 36 *****************
336 2018-02-02 07:47 37 ******************
337 2018-02-02 07:48 37 ******************
338 2018-02-02 07:49 38 *******************
... ..( 2 skipped). .. *******************
341 2018-02-02 07:52 38 *******************
342 2018-02-02 07:53 39 ********************
... ..( 12 skipped). .. ********************
355 2018-02-02 08:06 39 ********************
356 2018-02-02 08:07 38 *******************
... ..( 2 skipped). .. *******************
359 2018-02-02 08:10 38 *******************
360 2018-02-02 08:11 37 ******************
... ..( 7 skipped). .. ******************
368 2018-02-02 08:19 37 ******************
369 2018-02-02 08:20 38 *******************
... ..( 16 skipped). .. *******************
386 2018-02-02 08:37 38 *******************
387 2018-02-02 08:38 37 ******************
... ..( 3 skipped). .. ******************
391 2018-02-02 08:42 37 ******************
392 2018-02-02 08:43 36 *****************
... ..(102 skipped). .. *****************
17 2018-02-02 10:26 36 *****************
18 2018-02-02 10:27 37 ******************
... ..( 8 skipped). .. ******************
27 2018-02-02 10:36 37 ******************
28 2018-02-02 10:37 36 *****************
... ..( 15 skipped). .. *****************
44 2018-02-02 10:53 36 *****************
45 2018-02-02 10:54 37 ******************
... ..( 3 skipped). .. ******************
49 2018-02-02 10:58 37 ******************
50 2018-02-02 10:59 38 *******************
... ..( 3 skipped). .. *******************
54 2018-02-02 11:03 38 *******************
55 2018-02-02 11:04 37 ******************
... ..( 3 skipped). .. ******************
59 2018-02-02 11:08 37 ******************
60 2018-02-02 11:09 38 *******************
... ..( 47 skipped). .. *******************
108 2018-02-02 11:57 38 *******************
109 2018-02-02 11:58 37 ******************
110 2018-02-02 11:59 37 ******************
111 2018-02-02 12:00 29 **********
112 2018-02-02 12:01 29 **********
113 2018-02-02 12:02 29 **********
114 2018-02-02 12:03 30 ***********
115 2018-02-02 12:04 30 ***********
116 2018-02-02 12:05 31 ************
117 2018-02-02 12:06 31 ************
118 2018-02-02 12:07 32 *************
... ..( 2 skipped). .. *************
121 2018-02-02 12:10 32 *************
122 2018-02-02 12:11 33 **************
123 2018-02-02 12:12 33 **************
124 2018-02-02 12:13 34 ***************
125 2018-02-02 12:14 35 ****************
126 2018-02-02 12:15 35 ****************
127 2018-02-02 12:16 35 ****************
128 2018-02-02 12:17 36 *****************
... ..( 4 skipped). .. *****************
133 2018-02-02 12:22 36 *****************
134 2018-02-02 12:23 37 ******************
... ..( 6 skipped). .. ******************
141 2018-02-02 12:30 37 ******************
142 2018-02-02 12:31 38 *******************
... ..( 94 skipped). .. *******************
237 2018-02-02 14:06 38 *******************

SCT Error Recovery Control:
Read: Disabled
Write: Disabled

Device Statistics (GP/SMART Log 0x04) not supported

SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0009 2 65535+ Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
 
You must log in or register to reply here.

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top