What's new Search

Recent content by Slimjimm

S
Constant BSOD on new PC build

According to g.skill the ram is compatible with this board and the gigabyte vision g F4-3600C16D-32GTZNC-G.SKILL International Enterprise Co., Ltd. I just started another memtest, I will post when that concludes
- Slimjimm
- Post #19
- Nov 11, 2020
- Forum: BSOD Crashes, Kernel Debugging
S
Constant BSOD on new PC build

Update, I ordered a new mobo and cpu, but the cpu turns out wasn't in stock, so I hooked up the new mobo, ASUS Rog Strix z490-E and I bsod before I finished installing windows, I swapped out the m.2 for a different sata ssd, completed the windows install, started performing windows updates and...
- Slimjimm
- Post #18
- Nov 11, 2020
- Forum: BSOD Crashes, Kernel Debugging
S
Constant BSOD on new PC build
- Slimjimm
- Post #16
- Nov 11, 2020
- Forum: BSOD Crashes, Kernel Debugging
S
Constant BSOD on new PC build

Im about to head to bed, thank you for the help, this has been and still is a massive head ache. The 1st pass is almost finished, i will post a picture of it, but I will have to cancel the rest for tonight. Currently at 91% with 0 errors
- Slimjimm
- Post #15
- Nov 11, 2020
- Forum: BSOD Crashes, Kernel Debugging
S
Constant BSOD on new PC build

I swapped GPU and PSU, tomorrow I have another cpu and mobo coming and a spare ssd if it comes to that. I also swapped the case and tried with nothing from the cases plugged in, using a jumper to turn it on and same scenario.
- Slimjimm
- Post #13
- Nov 11, 2020
- Forum: BSOD Crashes, Kernel Debugging
S
Constant BSOD on new PC build

Yes I completed A and B, the sake of clarity I will refer to this PC as (N) for new and the (O) for the old I took the ram from N and put it in O and O worked fine for about 12 hours, I took the ran from O and put it in N and BSOD at about the same rate. I tested both (with both combinations of...
- Slimjimm
- Post #11
- Nov 11, 2020
- Forum: BSOD Crashes, Kernel Debugging
S
Constant BSOD on new PC build

I ran 6 passes with memtest86 prior to coming to here, nothing was found, I swapped the original ram into another pc and took the know working ram and it yielded the same results of constant bsod but on the other machine both rams sets never had any problems. I will start the test now,
- Slimjimm
- Post #9
- Nov 11, 2020
- Forum: BSOD Crashes, Kernel Debugging
S
Constant BSOD on new PC build

I am currently in safe mode w/ networking, a bit confused on what you need me to do, do I just need to run the collector again or just wait and see if a bsod occurs and then post those results, sorry this is way above my tech umbrella
- Slimjimm
- Post #7
- Nov 11, 2020
- Forum: BSOD Crashes, Kernel Debugging
S
Constant BSOD on new PC build

Just had 2 while trying to run the log collector :(
- Slimjimm
- Post #5
- Nov 11, 2020
- Forum: BSOD Crashes, Kernel Debugging
S
Constant BSOD on new PC build

Unfortantly I already installed fresh windows so I am not running the driver verifier anymore, so that driver was for the lighting control for the mother board, the logs i attached for the bsod were before I formatted/reinstalled windows, and I am still bsod on a fresh install with absolutely...
- Slimjimm
- Post #3
- Nov 11, 2020
- Forum: BSOD Crashes, Kernel Debugging
S
Constant BSOD on new PC build

A brief description of your problem (but you can also include the steps you tried) I built this PC last week, ran fine for a few days and in the last 3 days it just started BSOD very regularly, like 3-5 times a hour. When I first built, I did not have my video card/case so I was using an old...
- Slimjimm
- Thread
- Nov 10, 2020
- Replies: 18
- Forum: BSOD Crashes, Kernel Debugging

Slimjimm