[SOLVED] win10 won't update after 1703

koendecoster · Oct 10, 2018

Dear,

I have problems updating win10

DISM says 'de configuratieregisterdatabase is beschadigd' (sorry, I have a dutch version

)

SFCFix stops after DISM

(SFCFix version 3.0.0.0 by niemiro.Start time: 2018-10-10 08:10:12.699
Microsoft Windows 10 Build 15063 - amd64
Not using a script file.

AutoAnalysis::
WARNING: Failed to check store directories with return code 1 and error code ERROR_FILE_NOT_FOUND. COMPONENTS hive may be corrupt.

WARNING: Components hive failed load test and may be corrupt.

WARNING: Components hive failed final reload test with error code ERROR_BADDB and may be corrupt.

SUMMARY: No corruptions were detected.
AutoAnalysis:: directive completed successfully.

Successfully processed all directives.
SFCFix version 3.0.0.0 by niemiro has completed.
Currently storing 0 datablocks.
Finish time: 2018-10-10 08:10:53.480
----------------------EOF-----------------------)

I have mounted the install.wim from a win10 iso with DISM and ran DISM restorehealth on this image
Can I now replace my components file with the one in the image?

link to corrupt components-file: Dropbox - components.zip

kind regards

Koen

Sysnative Windows Update · Oct 11, 2018

Hello and welcome!

Step 1 - Replace Components Hive Manually

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

Download COMPONENTS.ZIP and save to your desktop.
Right-click on it and select Extract all.... Make sure the "Show extracted files when complete" is checked and click Extract.
Now we have the COMPONENTS file that we will be using to replace your current one.
Navigate to C:\Windows\System32\config
Right-click on the current COMPONENTS file and select rename. Rename it to COMPONENTS.bad.
Note: If you get an error that the file is in use, reboot your computer and then try again.
Take the file from the Components folder on your desktop and paste it into C:\Windows\System32\config

Step#2 - DISM /RestoreHealth Scan
Warning:this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

Right-click on the Start button and select Command Prompt (Admin)
When command prompt opens, Copy (Ctrl+C) and Paste (Right-click > Paste) the following command into it, then press Enter
Dism /Online /Cleanup-Image /RestoreHealth
Once it finishes, copy and paste the following into the command-prompt window and press Enter. If prompted to overwrite the existing file go ahead.
copy %windir%\logs\cbs\cbs.log "%userprofile%\Desktop\cbs.txt"
Once this has completed please go to your Desktop and you will find CBS.txt => Please zip/upload to this thread.
Please Note:: if the file is too big (over 7MB) to upload to your next post, please upload via a service such as Dropbox or One Drive or SendSpace and just provide the link.

koendecoster · Oct 12, 2018

Hi,

thanks for your reaction.
So far everything went good, DISM gave no problems anymore

added cbs.zip as demanded

regards,

Koen

softwaremaniac said:
Hello and welcome!

Step 1 - Replace Components Hive Manually

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

Download COMPONENTS.ZIP and save to your desktop.

Right-click on it and select Extract all.... Make sure the "Show extracted files when complete" is checked and click Extract.

Now we have the COMPONENTS file that we will be using to replace your current one.

Navigate to C:\Windows\System32\config

Right-click on the current COMPONENTS file and select rename. Rename it to COMPONENTS.bad.
Note: If you get an error that the file is in use, reboot your computer and then try again.

Take the file from the Components folder on your desktop and paste it into C:\Windows\System32\config

Step#2 - DISM /RestoreHealth Scan
Warning:this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

Right-click on the Start button and select Command Prompt (Admin)

When command prompt opens, Copy (Ctrl+C) and Paste (Right-click > Paste) the following command into it, then press Enter
Dism /Online /Cleanup-Image /RestoreHealth

Once it finishes, copy and paste the following into the command-prompt window and press Enter. If prompted to overwrite the existing file go ahead.
copy %windir%\logs\cbs\cbs.log "%userprofile%\Desktop\cbs.txt"

Once this has completed please go to your Desktop and you will find CBS.txt => Please zip/upload to this thread.
Please Note:: if the file is too big (over 7MB) to upload to your next post, please upload via a service such as Dropbox or One Drive or SendSpace and just provide the link.

Sysnative Windows Update · Oct 12, 2018

Very good. Please try upgrading your system to the latest build now and let me know if successful.

Sysnative Windows Update · Oct 12, 2018

By the way, did you replace the COMPONENTS hive as instructed?

koendecoster · Oct 12, 2018

softwaremaniac said:
By the way, did you replace the COMPONENTS hive as instructed?

hi,

yes, did that
I have done a few updates (still 1703) with a few crashes, hanging, blue screens but at last they succeeded
When i tried to update to 1803 everything went wrong: hanging, blue screen (stop code clock watchdog timeout) and unable to restart the computer
(error 'unknown hard error' by sihost.exe). Sometimes I get a very reduced desktop that disappears after a few seconds, black screen with only a cursor...
After a few hours of trying I managed to get to the task manager with ctrl-shift-esc and could shutdown the computer. By the next startup the previous version of windows was replaced. oef
Tried again the update. Everything fine until 75%, then 5 times restart and again previous version....
what can I try next?

regards,
Koen

Sysnative Windows Update · Oct 12, 2018

Yikes! Please attach setuperr.log.

koendecoster · Oct 12, 2018

added setuperror.log

Sysnative Windows Update · Oct 12, 2018

Run SFC Scan and attach CBS.log.

koendecoster · Oct 12, 2018

sfc /scannow said
"Windows Resource Protection did not find any integrity violations."

added cbs.log

Sysnative Windows Update · Oct 12, 2018

Step#1 - FRST Scan

1. Please download Farbar Recovery Scan Tool and save it to your Desktop.
Note: You need to run the 64-bit Version so please ensure you download that one.
2. Right click to run as administrator. When the tool opens click Yes to disclaimer.
3. Please ensure you place a check mark in the Addition.txt check box at the bottom of the form before running (if not already).
4. Press Scan button.
5. It will produce a log called FRST.txt in the same directory the tool is run from (which should now be the desktop)
6. Please attach the log back here.
7. Another log (Addition.txt - also located in the same directory as FRST64.exe) will be generated Please also attach that along with the FRST.txt in your reply.

koendecoster · Oct 12, 2018

Sysnative Windows Update · Oct 12, 2018

The evidence of pirated software is present. Unfortunately, we cannot assist further. This topic is locked.

Sysnative Windows Update · Oct 13, 2018

The user has decided to remove cracked software and informed me via PM, so I'm reopening this thread.

Please provide a fresh set of FRST logs so I can verify that KMS has really been removed. Thank you.

Good night!

koendecoster · Oct 13, 2018

Thank you!

Sysnative Windows Update · Oct 13, 2018

Please uninstall the following items:

Advanced System Repair Pro
Malwarebytes

Also please provide me with the exact model of the machine.

koendecoster · Oct 13, 2018

softwaremaniac said:
Please uninstall the following items:

Advanced System Repair Pro
Malwarebytes

Also please provide me with the exact model of the machine.

Acer Aspire M3970

Sysnative Windows Update · Oct 13, 2018

Please try upgrading now.

koendecoster · Oct 13, 2018

trying to update to 1709 from cd fails after 75% (black screen, had to turn computer off/on) with error code 0xC1900101-0x40017 in fase SECOND_BOOT

Sysnative Windows Update · Oct 13, 2018

Please attach setuperr.log and setupact.log.

[SOLVED] win10 won't update after 1703

Member

Attachments

Inactive

Attachments

Member

Attachments

Inactive

Inactive

Member

Inactive

Member

Attachments

Inactive

Member

Attachments

Inactive

Member

Attachments

Inactive

Inactive

Member

Attachments

Inactive

Member

Inactive

Member

Inactive