MSDTC.LOG ("sfc /scannow") problems

moosua · Sep 5, 2018

Hi there! My PC currently can't complete the "sfc /scannow" function in Windows 8.1 command prompt. At first, I wanted to try to create a restore point to backup my C: drive system settings in Windows System Protection. But it was failed and the system showed this message: "The restore point could not be created for the following reason: The specified object was not found. (0x80042308)". I tried various methods to fix this problem, including restarting the "Volume Shadow Copy" services in "service.msc", but it didn't work. After that, I found a solution in one website saying that it happened because of registry errors, so I need to run "chkdsk /r" and also "sfc /scannow" right after that. First, I inputted "chkdsk /r" on my command prompt, then I left the process overnight. On the following day, I tried the "sfc /scannow" and I just found this problem recently when I was running the "sfc /scannow" multiple times as the progress itself always stops at 51%. Please assist me how to fix this, thank you before. :)

Best regards,

moosua

Sysnative Windows Update · Sep 5, 2018

Hi!

SFCFix Script

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

Download SFCFix.exe (by niemiro) and save this to your Desktop.
Download the file below, SFCFix.zip, and save this to your Desktop. Ensure that this file is named SFCFix.zip - do not rename it.
Save any open documents and close all open windows.
On your Desktop, you should see two files: SFCFix.exe and SFCFix.zip.
Drag the file SFCFix.zip onto the file SFCFix.exe and release it.
SFCFix will now process the script.
Upon completion, a file should be created on your Desktop: SFCFix.txt.
Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this file into your next post for me to analyse please - put
Code:
tags around the log to break up the text.

SFC Scan

Click on the Start button and in the search box, type Command Prompt
When you see Command Prompt on the list, right-click on it and select Run as administrator
When command prompt opens, copy and paste the following commands into it, press enter after each

sfc /scannow

Wait for this to finish before you continue

copy %windir%\logs\cbs\cbs.log %userprofile%\Desktop\cbs.txt
This will create a file, cbs.txt on your Desktop. Please attach this to your next post.

moosua · Sep 5, 2018

Thanks for fast response :)
Below is the result of the SFCFix:

Code:

SFCFix version 3.0.0.0 by niemiro.
Start time: 2018-09-06 06:27:51.262
Microsoft Windows 8.1 Update 3 - amd64
Using .zip script file at C:\Users\Tot0ZX\Desktop\SFCFix.zip [0]




PowerCopy::
Successfully took permissions for file or folder C:\Windows\winsxs\amd64_microsoft-windows-com-dtc-runtime_31bf3856ad364e35_6.3.9600.17415_none_0a5dfdcc33c06e7e\MSDTC.LOG

Successfully copied file C:\Users\Tot0ZX\AppData\Local\niemiro\Archive\winsxs\amd64_microsoft-windows-com-dtc-runtime_31bf3856ad364e35_6.3.9600.17415_none_0a5dfdcc33c06e7e\MSDTC.LOG to C:\Windows\winsxs\amd64_microsoft-windows-com-dtc-runtime_31bf3856ad364e35_6.3.9600.17415_none_0a5dfdcc33c06e7e\MSDTC.LOG.

Successfully restored ownership for C:\Windows\winsxs\amd64_microsoft-windows-com-dtc-runtime_31bf3856ad364e35_6.3.9600.17415_none_0a5dfdcc33c06e7e\MSDTC.LOG
Successfully restored permissions on C:\Windows\winsxs\amd64_microsoft-windows-com-dtc-runtime_31bf3856ad364e35_6.3.9600.17415_none_0a5dfdcc33c06e7e\MSDTC.LOG
PowerCopy:: directive completed successfully.




Successfully processed all directives.
SFCFix version 3.0.0.0 by niemiro has completed.
Currently storing 2 datablocks.
Finish time: 2018-09-06 06:27:54.059
Script hash: qe2uu407jSaqfHpo9pr3pfFBSJ0PzwTcdi+66t3pUkg=
----------------------EOF-----------------------

Sysnative Windows Update · Sep 5, 2018

SFCFix Script

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

Download SFCFix.exe (by niemiro) and save this to your Desktop.
Download the file below, SFCFix.zip, and save this to your Desktop. Ensure that this file is named SFCFix.zip - do not rename it.
Save any open documents and close all open windows.
On your Desktop, you should see two files: SFCFix.exe and SFCFix.zip.
Drag the file SFCFix.zip onto the file SFCFix.exe and release it.
SFCFix will now process the script.
Upon completion, a file should be created on your Desktop: SFCFix.txt.
Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this file into your next post for me to analyse please - put
Code:
tags around the log to break up the text.

SFC Scan

Click on the Start button and in the search box, type Command Prompt
When you see Command Prompt on the list, right-click on it and select Run as administrator
When command prompt opens, copy and paste the following commands into it, press enter after each

sfc /scannow

Wait for this to finish before you continue

copy %windir%\logs\cbs\cbs.log %userprofile%\Desktop\cbs.txt
This will create a file, cbs.txt on your Desktop. Please attach this to your next post.

moosua · Sep 6, 2018

Sorry for the delay... the "sfc /scannow" still stopped at 51% though.

Code:

SFCFix version 3.0.0.0 by niemiro.
Start time: 2018-09-06 07:05:26.210
Microsoft Windows 8.1 Update 3 - amd64
Using .zip script file at C:\Users\Tot0ZX\Desktop\SFCFix.zip [0]




PowerCopy::
Successfully took permissions for file or folder C:\Windows\winsxs\amd64_microsoft-windows-mobsync_31bf3856ad364e35_6.3.9600.17415_none_e67aa1e81d1e97e7\SyncCenter.dll

Failed to backup file C:\Windows\winsxs\amd64_microsoft-windows-mobsync_31bf3856ad364e35_6.3.9600.17415_none_e67aa1e81d1e97e7\SyncCenter.dll with error code 0x45D.

The file \\?\C:\Windows\winsxs\amd64_microsoft-windows-mobsync_31bf3856ad364e35_6.3.9600.17415_none_e67aa1e81d1e97e7\SyncCenter.dll is in use and must be replaced over a reboot.

Successfully pended file for replace over reboot: \\?\C:\Windows\winsxs\amd64_microsoft-windows-mobsync_31bf3856ad364e35_6.3.9600.17415_none_e67aa1e81d1e97e7\SyncCenter.dll
PowerCopy:: directive completed successfully.




Reboot:: directive completed successfully.




PostRebootCorruptionDetection::
No hash verification failures detected.
PostRebootCorruptionDetection:: directive completed successfully.




PostRebootRestorePermissions::
Successfully restored ownership for C:\Windows\winsxs\amd64_microsoft-windows-mobsync_31bf3856ad364e35_6.3.9600.17415_none_e67aa1e81d1e97e7\SyncCenter.dll
Successfully restored permissions on C:\Windows\winsxs\amd64_microsoft-windows-mobsync_31bf3856ad364e35_6.3.9600.17415_none_e67aa1e81d1e97e7\SyncCenter.dll
PostRebootRestorePermissions:: directive completed successfully.




Successfully processed all directives.
SFCFix version 3.0.0.0 by niemiro has completed.
Currently storing 3 datablocks.
Finish time: 2018-09-06 21:34:48.632
----------------------EOF-----------------------

Sysnative Windows Update · Sep 6, 2018

Please create a System Restore Point and then do the following:

SFCFix Script

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

Download SFCFix.exe (by niemiro) and save this to your Desktop.
Download the file below, SFCFix.zip, and save this to your Desktop. Ensure that this file is named SFCFix.zip - do not rename it.
Save any open documents and close all open windows.
On your Desktop, you should see two files: SFCFix.exe and SFCFix.zip.
Drag the file SFCFix.zip onto the file SFCFix.exe and release it.
SFCFix will now process the script.
Upon completion, a file should be created on your Desktop: SFCFix.txt.
Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this file into your next post for me to analyse please - put tags around the log to break up the text.

SFC Scan

Click on the Start button and in the search box, type Command Prompt
When you see Command Prompt on the list, right-click on it and select Run as administrator
When command prompt opens, copy and paste the following commands into it, press enter after each

sfc /scannow

Wait for this to finish before you continue

copy %windir%\logs\cbs\cbs.log %userprofile%\Desktop\cbs.txt
This will create a file, cbs.txt on your Desktop. Please attach this to your next post.

moosua · Sep 6, 2018

The system restore error is the initial problem that I hoped that could be solved by "chkdsk /r" and "sfc /scannow". What should I do in this case?

moosua · Sep 6, 2018

NP. and it's also still showing the same error

Sysnative Windows Update · Sep 6, 2018

GSmartControl
Follow the instructions below to test your hard drive health with GSmartControl:

Download GSmartControl and save it on your Desktop;
Execute gsmartcontrol.exe; Let the install complete and launch the programme.
Identify your drive in the list, and double-click on it to bring up it's window (usually you'll find your drive by it's size or it's brand name);
Go in the Perform Tests tab, then select Extended Self-test in the Test type drop-down list and click on Execute (this test can take a few hours to complete);
Once the test is over, the results will be displayed at the bottom of the window. Please copy and paste these results in your next reply;
Also, go in the Attributes tab and if you have any entries highlighted in red or pink, take a screenshot of the GSmartControl window and attach it in your next reply;

moosua · Sep 6, 2018

Hmm, it didn't take quite long time... it's interrupted at 10-ish percentage

Code:

smartctl 6.5 2016-05-07 r4318 [i686-w64-mingw32-win8.1(64)] (sf-6.5-1)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Hitachi/HGST Travelstar Z5K500
Device Model:     HGST HTS545050A7E680
Serial Number:    RB050AM5H2LHHP
LU WWN Device Id: 5 000cca 7e3cf45b1
Firmware Version: GR2OA3B0
User Capacity:    500.107.862.016 bytes [500 GB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      2.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 6
SATA Version is:  SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Thu Sep 06 23:36:53 2018 SEAST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM level is:     1 (minimum power consumption with standby)
Rd look-ahead is: Enabled
Write cache is:   Enabled
ATA Security is:  Disabled, NOT FROZEN [SEC1]

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)    Offline data collection activity
                    was never started.
                    Auto Offline Data Collection: Disabled.
Self-test execution status:      ( 121)    The previous self-test completed having
                    the read element of the test failed.
Total time to complete Offline 
data collection:         (   45) seconds.
Offline data collection
capabilities:              (0x5b) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    Offline surface scan supported.
                    Self-test supported.
                    No Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003)    Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    General Purpose Logging supported.
Short self-test routine 
recommended polling time:      (   2) minutes.
Extended self-test routine
recommended polling time:      ( 109) minutes.
SCT capabilities:            (0x003d)    SCT Status supported.
                    SCT Error Recovery Control supported.
                    SCT Feature Control supported.
                    SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     PO-R--   099   099   062    -    196608
  2 Throughput_Performance  P-S---   100   100   040    -    0
  3 Spin_Up_Time            POS---   253   253   033    -    0
  4 Start_Stop_Count        -O--C-   094   094   000    -    9779
  5 Reallocated_Sector_Ct   PO--CK   100   100   005    -    0
  7 Seek_Error_Rate         PO-R--   100   100   067    -    0
  8 Seek_Time_Performance   P-S---   100   100   040    -    0
  9 Power_On_Hours          -O--C-   084   084   000    -    7243
 10 Spin_Retry_Count        PO--C-   100   100   060    -    0
 12 Power_Cycle_Count       -O--CK   099   099   000    -    2393
191 G-Sense_Error_Rate      -O-R--   100   100   000    -    0
192 Power-Off_Retract_Count -O--CK   100   100   000    -    16
193 Load_Cycle_Count        -O--C-   091   091   000    -    95779
194 Temperature_Celsius     -O----   153   153   000    -    39 (Min/Max 19/48)
196 Reallocated_Event_Count -O--CK   100   100   000    -    1
197 Current_Pending_Sector  -O---K   100   100   000    -    32
198 Offline_Uncorrectable   ---R--   100   100   000    -    0
199 UDMA_CRC_Error_Count    -O-R--   200   200   000    -    0
223 Load_Retry_Count        -O-R--   100   100   000    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      1  Comprehensive SMART error log
0x03       GPL     R/O      1  Ext. Comprehensive SMART error log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      1  Extended self-test log
0x09           SL  R/W      1  Selective self-test log
0x10       GPL     R/O      1  SATA NCQ Queued Error log
0x11       GPL     R/O      1  SATA Phy Event Counters log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
Device Error Count: 14342 (device log contains only the most recent 4 errors)
    CR     = Command Register
    FEATR  = Features Register
    COUNT  = Count (was: Sector Count) Register
    LBA_48 = Upper bytes of LBA High/Mid/Low Registers ]  ATA-8
    LH     = LBA High (was: Cylinder High) Register    ]   LBA
    LM     = LBA Mid (was: Cylinder Low) Register      ] Register
    LL     = LBA Low (was: Sector Number) Register     ]
    DV     = Device (was: Device/Head) Register
    DC     = Device Control Register
    ER     = Error register
    ST     = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 14342 [1] occurred at disk power-on lifetime: 7242 hours (301 days + 18 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 18 00 00 11 a9 cc 48 01 00  Error: UNC at LBA = 0x11a9cc48 = 296340552

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 20 00 a0 00 00 11 a9 cc 40 40 00     01:32:07.999  READ FPDMA QUEUED
  60 00 38 00 98 00 00 00 12 7d 6a 40 00     01:32:07.982  READ FPDMA QUEUED
  ef 00 90 00 03 00 00 00 00 00 00 a0 00     01:32:07.977  SET FEATURES [Disable SATA feature]
  60 00 20 00 90 00 00 00 66 d3 e0 40 00     01:32:07.930  READ FPDMA QUEUED
  60 00 10 00 88 00 00 00 0d 43 27 40 00     01:32:07.930  READ FPDMA QUEUED

Error 14341 [0] occurred at disk power-on lifetime: 7242 hours (301 days + 18 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 18 00 00 11 a9 cc 48 01 00  Error: UNC at LBA = 0x11a9cc48 = 296340552

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 08 00 68 00 00 00 6a f8 10 40 00     01:32:04.441  READ FPDMA QUEUED
  61 00 08 00 60 00 00 0a 34 cb 08 40 00     01:32:04.441  WRITE FPDMA QUEUED
  61 00 20 00 58 00 00 0a 34 c0 60 40 00     01:32:04.440  WRITE FPDMA QUEUED
  61 00 08 00 50 00 00 0a 34 cb 10 40 00     01:32:04.440  WRITE FPDMA QUEUED
  61 00 20 00 48 00 00 0a 34 c0 60 40 00     01:32:04.440  WRITE FPDMA QUEUED

Error 14340 [3] occurred at disk power-on lifetime: 7242 hours (301 days + 18 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 18 00 00 11 a9 cc 48 01 00  Error: UNC at LBA = 0x11a9cc48 = 296340552

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 10 00 d8 00 00 00 0d 43 27 40 00     01:32:00.914  READ FPDMA QUEUED
  60 00 40 00 d0 00 00 04 b6 18 1a 40 00     01:32:00.914  READ FPDMA QUEUED
  60 00 08 00 c8 00 00 00 6a f8 00 40 00     01:32:00.914  READ FPDMA QUEUED
  60 00 20 00 c0 00 00 00 66 d3 e0 40 00     01:32:00.914  READ FPDMA QUEUED
  61 00 08 00 b8 00 00 00 03 ae a0 40 00     01:32:00.914  WRITE FPDMA QUEUED

Error 14339 [2] occurred at disk power-on lifetime: 7242 hours (301 days + 18 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 18 00 00 11 a9 cc 48 01 00  Error: UNC at LBA = 0x11a9cc48 = 296340552

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 20 00 a8 00 00 11 a9 cc 40 40 00     01:31:57.477  READ FPDMA QUEUED
  60 00 08 00 a0 00 00 00 6a f8 00 40 00     01:31:57.477  READ FPDMA QUEUED
  60 00 40 00 98 00 00 04 b6 18 1a 40 00     01:31:57.477  READ FPDMA QUEUED
  60 00 20 00 90 00 00 00 66 d3 e0 40 00     01:31:57.477  READ FPDMA QUEUED
  60 00 10 00 88 00 00 00 0d 43 27 40 00     01:31:57.477  READ FPDMA QUEUED

SMART Extended Self-test Log Version: 1 (1 sectors)
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed: read failure       90%      7243         6658936

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       256 (0x0100)
SCT Support Level:                   1
Device State:                        Active (0)
Current Temperature:                    39 Celsius
Power Cycle Min/Max Temperature:     29/42 Celsius
Lifetime    Min/Max Temperature:     19/48 Celsius
Lifetime    Average Temperature:        36 Celsius
Under/Over Temperature Limit Count:   0/0

SCT Temperature History Version:     2
Temperature Sampling Period:         1 minute
Temperature Logging Interval:        1 minute
Min/Max recommended Temperature:      0/60 Celsius
Min/Max Temperature Limit:           -40/65 Celsius
Temperature History Size (Index):    128 (57)

Index    Estimated Time   Temperature Celsius
  58    2018-09-06 21:29    40  *********************
 ...    ..(  2 skipped).    ..  *********************
  61    2018-09-06 21:32    40  *********************
  62    2018-09-06 21:33    39  ********************
  63    2018-09-06 21:34     ?  -
  64    2018-09-06 21:35    30  ***********
  65    2018-09-06 21:36    32  *************
  66    2018-09-06 21:37    33  **************
  67    2018-09-06 21:38    34  ***************
  68    2018-09-06 21:39    34  ***************
  69    2018-09-06 21:40    35  ****************
  70    2018-09-06 21:41    36  *****************
  71    2018-09-06 21:42    37  ******************
  72    2018-09-06 21:43    37  ******************
  73    2018-09-06 21:44    38  *******************
  74    2018-09-06 21:45    38  *******************
  75    2018-09-06 21:46    39  ********************
  76    2018-09-06 21:47    39  ********************
  77    2018-09-06 21:48    40  *********************
 ...    ..(  3 skipped).    ..  *********************
  81    2018-09-06 21:52    40  *********************
  82    2018-09-06 21:53    41  **********************
 ...    ..(  2 skipped).    ..  **********************
  85    2018-09-06 21:56    41  **********************
  86    2018-09-06 21:57    42  ***********************
  87    2018-09-06 21:58    42  ***********************
  88    2018-09-06 21:59    41  **********************
  89    2018-09-06 22:00    41  **********************
  90    2018-09-06 22:01    41  **********************
  91    2018-09-06 22:02    42  ***********************
  92    2018-09-06 22:03    41  **********************
  93    2018-09-06 22:04    41  **********************
  94    2018-09-06 22:05    40  *********************
 ...    ..(  3 skipped).    ..  *********************
  98    2018-09-06 22:09    40  *********************
  99    2018-09-06 22:10    39  ********************
 ...    ..(  4 skipped).    ..  ********************
 104    2018-09-06 22:15    39  ********************
 105    2018-09-06 22:16    38  *******************
 106    2018-09-06 22:17    39  ********************
 107    2018-09-06 22:18    40  *********************
 108    2018-09-06 22:19    40  *********************
 109    2018-09-06 22:20    41  **********************
 110    2018-09-06 22:21    41  **********************
 111    2018-09-06 22:22    41  **********************
 112    2018-09-06 22:23    42  ***********************
 ...    ..(  3 skipped).    ..  ***********************
 116    2018-09-06 22:27    42  ***********************
 117    2018-09-06 22:28    41  **********************
 118    2018-09-06 22:29    41  **********************
 119    2018-09-06 22:30    41  **********************
 120    2018-09-06 22:31    40  *********************
 121    2018-09-06 22:32    40  *********************
 122    2018-09-06 22:33    41  **********************
 123    2018-09-06 22:34    41  **********************
 124    2018-09-06 22:35    42  ***********************
 ...    ..(  4 skipped).    ..  ***********************
   1    2018-09-06 22:40    42  ***********************
   2    2018-09-06 22:41    41  **********************
   3    2018-09-06 22:42    41  **********************
   4    2018-09-06 22:43    40  *********************
 ...    ..(  8 skipped).    ..  *********************
  13    2018-09-06 22:52    40  *********************
  14    2018-09-06 22:53    39  ********************
 ...    ..(  4 skipped).    ..  ********************
  19    2018-09-06 22:58    39  ********************
  20    2018-09-06 22:59    40  *********************
  21    2018-09-06 23:00    39  ********************
 ...    ..(  4 skipped).    ..  ********************
  26    2018-09-06 23:05    39  ********************
  27    2018-09-06 23:06    40  *********************
  28    2018-09-06 23:07    40  *********************
  29    2018-09-06 23:08    40  *********************
  30    2018-09-06 23:09    39  ********************
 ...    ..( 10 skipped).    ..  ********************
  41    2018-09-06 23:20    39  ********************
  42    2018-09-06 23:21    38  *******************
  43    2018-09-06 23:22    39  ********************
  44    2018-09-06 23:23    38  *******************
  45    2018-09-06 23:24    38  *******************
  46    2018-09-06 23:25    39  ********************
 ...    ..(  5 skipped).    ..  ********************
  52    2018-09-06 23:31    39  ********************
  53    2018-09-06 23:32    40  *********************
  54    2018-09-06 23:33    40  *********************
  55    2018-09-06 23:34    39  ********************
  56    2018-09-06 23:35    39  ********************
  57    2018-09-06 23:36    39  ********************

SCT Error Recovery Control:
           Read: Disabled
          Write: Disabled

Device Statistics (GP/SMART Log 0x04) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  2            0  Command failed due to ICRC error
0x0002  2            0  R_ERR response for data FIS
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0005  2            0  R_ERR response for non-data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS
0x0009  2        43852  Transition from drive PhyRdy to drive PhyNRdy
0x000a  2          155  Device-to-host register FISes sent due to a COMRESET
0x000b  2            0  CRC errors within host-to-device FIS
0x000d  2            0  Non-CRC errors within host-to-device FIS

And here's the attribute results:

Sysnative Windows Update · Sep 6, 2018

And we have found the root cause of your problem. Unfortunately, your HDD is failing. Please back up all your data and replace the drive.

Search

Search

MSDTC.LOG ("sfc /scannow") problems

moosua

Member

Attachments

Sysnative Windows Update

Inactive

Attachments

moosua

Member

Attachments

Sysnative Windows Update

Inactive

Attachments

moosua

Member

Attachments

Sysnative Windows Update

Inactive

Attachments

moosua

Member

moosua

Member

Sysnative Windows Update

Inactive

moosua

Member

Sysnative Windows Update

Inactive