Page 2 of 3 First 123 Last
  1. #21
    Moderator
    BSOD Kernel Dump Analyst
    Windows Update Senior Analyst
    softwaremaniac's Avatar
    Join Date
    Oct 2014
    Location
    Croatia
    Age
    22
    Posts
    5,166
    • specs System Specs
      • Motherboard:
        ASRock Fatal1ty P67 Main Board
      • CPU:
        Intel Core i7-2700K 3.5GHz
      • Memory:
        Crucial 2x8GB DDR3 1600 MHz
      • Graphics:
        Gigabyte GTX 1080 G1 Gaming 8 GB
      • Sound Card:
        Asus Xonar DSX
      • Hard Drives:
        WD Caviar Black 1TB SATA III 7200rpm, WD Caviar Black 6TB SATA III 7200rpm
      • Disk Drives:
        Samsung 840 Evo 250GB
      • Power Supply:
        Corsair GS 700W
      • Case:
        Silverstone KL04B Case
      • Cooling:
        CoolerMaster Arctic Freezer 7 Pro
      • Display:
        Philips Brilliance BDM4065UC 4K 3840x2160
      • Operating System:
        Windows 10 Pro 1703 x64

    Re: [7SP1 x64] WU failed, SFCFix could not fix some corruptions.

    They are not attached. But if all is clean, go ahead and try updates.
    If I haven't replied to your thread within 48 hours, please send me a Personal Message.


    • Ad Bot

      advertising
      Beep.

        
       

  2. #22

    Re: [7SP1 x64] WU failed, SFCFix could not fix some corruptions.

    Thank you for your mail.
    Logs which I forgot are attached.
    CBS Registry Error is still remained.

    ----------------------------------------
    Summary:
    Seconds executed: 4477
    Found 4 errors
    Fixed 1 errors
    CBS MUM Corrupt Total count: 1
    Fixed: CBS MUM Corrupt. Total count: 1
    CBS Registry Error Total count: 3
    Fixed: CBS Paired File. Total count: 1
    -------------------------------------------
    Attached Files Attached Files

  3. #23
    Moderator
    BSOD Kernel Dump Analyst
    Windows Update Senior Analyst
    softwaremaniac's Avatar
    Join Date
    Oct 2014
    Location
    Croatia
    Age
    22
    Posts
    5,166
    • specs System Specs
      • Motherboard:
        ASRock Fatal1ty P67 Main Board
      • CPU:
        Intel Core i7-2700K 3.5GHz
      • Memory:
        Crucial 2x8GB DDR3 1600 MHz
      • Graphics:
        Gigabyte GTX 1080 G1 Gaming 8 GB
      • Sound Card:
        Asus Xonar DSX
      • Hard Drives:
        WD Caviar Black 1TB SATA III 7200rpm, WD Caviar Black 6TB SATA III 7200rpm
      • Disk Drives:
        Samsung 840 Evo 250GB
      • Power Supply:
        Corsair GS 700W
      • Case:
        Silverstone KL04B Case
      • Cooling:
        CoolerMaster Arctic Freezer 7 Pro
      • Display:
        Philips Brilliance BDM4065UC 4K 3840x2160
      • Operating System:
        Windows 10 Pro 1703 x64

    Re: [7SP1 x64] WU failed, SFCFix could not fix some corruptions.

    Very interesting results indeed.

    Step#1 - FRST Fix
    NOTICE: This script was written specifically for this user, for use on that particular machine. Running this on another machine may cause damage to your operating system
    1. Please download Farbar Recovery Scan Tool and save it to your Desktop.
    Note: You need to run the 64-bit Version so please ensure you download that one.
    2. Download attached file and save it to the Desktop.
    Note. It's important that both files, FRST64 and fixlist.txt are in the same location or the fix will not work (in this case...the desktop).
    3. Run FRST64 by Right-Clicking on the file and choosing Run as administrator.
    4. Press the Fix button just once and wait. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
    5. When finished FRST64 will generate a log on the Desktop (Fixlog.txt). Please post the contents of it in your reply.

    Afterwards, please run SURT again and attach fresh CheckSUR.log
    Attached Files Attached Files
    If I haven't replied to your thread within 48 hours, please send me a Personal Message.

  4. #24

    Re: [7SP1 x64] WU failed, SFCFix could not fix some corruptions.

    Thank you.
    I run FRST64 and SURT, logs are attached.

    Fixlog_CheckSUR.zip

    ------------------------------------------------
    Summary:
    Seconds executed: 2064
    Found 4 errors
    Fixed 1 errors
    CBS MUM Corrupt Total count: 1
    Fixed: CBS MUM Corrupt. Total count: 1
    CBS Registry Error Total count: 3
    Fixed: CBS Paired File. Total count: 1
    ------------------------------------------------

  5. #25
    Moderator
    BSOD Kernel Dump Analyst
    Windows Update Senior Analyst
    softwaremaniac's Avatar
    Join Date
    Oct 2014
    Location
    Croatia
    Age
    22
    Posts
    5,166
    • specs System Specs
      • Motherboard:
        ASRock Fatal1ty P67 Main Board
      • CPU:
        Intel Core i7-2700K 3.5GHz
      • Memory:
        Crucial 2x8GB DDR3 1600 MHz
      • Graphics:
        Gigabyte GTX 1080 G1 Gaming 8 GB
      • Sound Card:
        Asus Xonar DSX
      • Hard Drives:
        WD Caviar Black 1TB SATA III 7200rpm, WD Caviar Black 6TB SATA III 7200rpm
      • Disk Drives:
        Samsung 840 Evo 250GB
      • Power Supply:
        Corsair GS 700W
      • Case:
        Silverstone KL04B Case
      • Cooling:
        CoolerMaster Arctic Freezer 7 Pro
      • Display:
        Philips Brilliance BDM4065UC 4K 3840x2160
      • Operating System:
        Windows 10 Pro 1703 x64

    Re: [7SP1 x64] WU failed, SFCFix could not fix some corruptions.

    Hello, please give me some more time to work on your issue :)
    Thanks for understanding.
    If I haven't replied to your thread within 48 hours, please send me a Personal Message.

  6. #26
    Moderator
    BSOD Kernel Dump Analyst
    Windows Update Senior Analyst
    softwaremaniac's Avatar
    Join Date
    Oct 2014
    Location
    Croatia
    Age
    22
    Posts
    5,166
    • specs System Specs
      • Motherboard:
        ASRock Fatal1ty P67 Main Board
      • CPU:
        Intel Core i7-2700K 3.5GHz
      • Memory:
        Crucial 2x8GB DDR3 1600 MHz
      • Graphics:
        Gigabyte GTX 1080 G1 Gaming 8 GB
      • Sound Card:
        Asus Xonar DSX
      • Hard Drives:
        WD Caviar Black 1TB SATA III 7200rpm, WD Caviar Black 6TB SATA III 7200rpm
      • Disk Drives:
        Samsung 840 Evo 250GB
      • Power Supply:
        Corsair GS 700W
      • Case:
        Silverstone KL04B Case
      • Cooling:
        CoolerMaster Arctic Freezer 7 Pro
      • Display:
        Philips Brilliance BDM4065UC 4K 3840x2160
      • Operating System:
        Windows 10 Pro 1703 x64

    Re: [7SP1 x64] WU failed, SFCFix could not fix some corruptions.

    Manually Delete Registry Key
    1. Click your Start button and type regedit in the search box.
    2. Right-click on regedit.exe that comes up in the search results and select Run as administrator. Answer Yes to the UAC prompt.
    3. The registry editor will open which is a window divided vertically into two panes. Make sure you scroll all the way to the top of the screen and click any black downward pointing arrows so that they turn white and all the keys are collapsed. It should look similar to the following.
    [7SP1 x64] WU failed, SFCFix could not fix some corruptions.-regedit-jpg

    4. Now click the arrow next to HKEY_LOCAL_MACHINE and it will expand all the subkeys beneath it.
    5. Scroll down and find the subkey named SOFTWARE and expand that. Continue expanding the following ones Microsoft\Windows\CurrentVersion\Component Based Servicing\ComponentDetect
    6. Beneath ComponentDetect you should see a key named amd64_netfx-system.xml_b03f5f7f11d50q3a_6.1.0.0_noneO66615f2 60b3680r
    7. Right-click on the key named amd64_netfx-system.xml_b03f5f7f11d50q3a_6.1.0.0_noneO66615f2 60b3680r and select Permissions...
    8. On the Permissions dialog click the Advanced button.
    9. Click the Owner tab on the Advanced Security Settings dialog.
    10. Click the Other users or groups... button
    11. Type Everyone in the text box and click OK.
    12. Check the box "Replace owner on subcontainers and objects".
    13. Click the Permissions tab again and uncheck "Include inheritable permissions from this object's parent".
    14. If prompted with a Windows Security warning with Add and Remove buttons, click Add.
    15. Click OK to close the Advanced Security Settings dialog.
    16. Make sure the Everyone group is selected in the Permissions dialog and ensure that the checkbox for Full Control under the Allow column is checked. Click OK.
    17. Now, right click on the amd64_netfx-system.xml_b03f5f7f11d50q3a_6.1.0.0_noneO66615f2 60b3680r key and select Delete. Answer Yes to the confirm dialog.


    Manually Delete Registry Key
    1. Click your Start button and type regedit in the search box.
    2. Right-click on regedit.exe that comes up in the search results and select Run as administrator. Answer Yes to the UAC prompt.
    3. The registry editor will open which is a window divided vertically into two panes. Make sure you scroll all the way to the top of the screen and click any black downward pointing arrows so that they turn white and all the keys are collapsed. It should look similar to the following.
    [7SP1 x64] WU failed, SFCFix could not fix some corruptions.-regedit-jpg

    4. Now click the arrow next to HKEY_LOCAL_MACHINE and it will expand all the subkeys beneath it.
    5. Scroll down and find the subkey named SOFTWARE and expand that. Continue expanding the following ones Microsoft\Windows\CurrentVersion\Component Based Servicing\Packages
    6. Beneath Packages you should see a key named Package_14_for_KB2685811~31bf3856ad364e35~amd64~~6.1>1.11
    7. Right-click on the key named Package_14_for_KB2685811~31bf3856ad364e35~amd64~~6.1>1.11 and select Permissions...
    8. On the Permissions dialog click the Advanced button.
    9. Click the Owner tab on the Advanced Security Settings dialog.
    10. Click the Other users or groups... button
    11. Type Everyone in the text box and click OK.
    12. Check the box "Replace owner on subcontainers and objects".
    13. Click the Permissions tab again and uncheck "Include inheritable permissions from this object's parent".
    14. If prompted with a Windows Security warning with Add and Remove buttons, click Add.
    15. Click OK to close the Advanced Security Settings dialog.
    16. Make sure the Everyone group is selected in the Permissions dialog and ensure that the checkbox for Full Control under the Allow column is checked. Click OK.
    17. Now, right click on the Package_14_for_KB2685811~31bf3856ad364e35~amd64~~6.1>1.11 key and select Delete. Answer Yes to the confirm dialog.


    Manually Delete Registry Key
    1. Click your Start button and type regedit in the search box.
    2. Right-click on regedit.exe that comes up in the search results and select Run as administrator. Answer Yes to the UAC prompt.
    3. The registry editor will open which is a window divided vertically into two panes. Make sure you scroll all the way to the top of the screen and click any black downward pointing arrows so that they turn white and all the keys are collapsed. It should look similar to the following.

    [7SP1 x64] WU failed, SFCFix could not fix some corruptions.-regedit-jpg

    4. Now click the arrow next to HKEY_LOCAL_MACHINE and it will expand all the subkeys beneath it.
    5. Scroll down and find the subkey named SOFTWARE and expand that. Continue expanding the following ones Microsoft\Windows\CurrentVersion\Component Based Servicing\Packages
    6. Beneath Packages you should see a key named Packqge_for_[B3163245~31bf38%6ad364e#5~amd64~~6.1.1.1
    7. Right-click on the key named Packqge_for_[B3163245~31bf38%6ad364e#5~amd64~~6.1.1.1 and select Permissions...
    8. On the Permissions dialog click the Advanced button.
    9. Click the Owner tab on the Advanced Security Settings dialog.
    10. Click the Other users or groups... button
    11. Type Everyone in the text box and click OK.
    12. Check the box "Replace owner on subcontainers and objects".
    13. Click the Permissions tab again and uncheck "Include inheritable permissions from this object's parent".
    14. If prompted with a Windows Security warning with Add and Remove buttons, click Add.
    15. Click OK to close the Advanced Security Settings dialog.
    16. Make sure the Everyone group is selected in the Permissions dialog and ensure that the checkbox for Full Control under the Allow column is checked. Click OK.
    17. Now, right click on the Packqge_for_[B3163245~31bf38%6ad364e#5~amd64~~6.1.1.1 key and select Delete. Answer Yes to the confirm dialog.

    Afterwards, please run SURT again and attach fresh CheckSUR.log

    I wish you a very Happy New Year!
    If I haven't replied to your thread within 48 hours, please send me a Personal Message.

  7. #27

    Re: [7SP1 x64] WU failed, SFCFix could not fix some corruptions.

    A happy new year !
    Thank you for your reply.

    I cannot delete all 3 registry keys manually.

    1. amd64_netfx-system.xml_b03f5f7f11d50q3a_6.1.0.0_noneO66615f2
    I cannot change Permission and message is
    "amd64_netfx-system.xml_b03f5f7f11d50q3a_6.1.0.0_noneO66615f2 60b3680r cannot be opened Error opening key - Cannot open keyname: Error while opening key
    Detail: Selected file not found"
    I try "export" but cannot export with message "Key is not exit, check the path".
    Also tried "rename" but cannot with message "cannot rename, error occured"

    2. Package_14_for_KB2685811~31bf3856ad364e35~amd64~~6.1>1.11
    Also I cannot change Permission and message is "Package_14_for_KB2685811~31bf3856ad364e35~amd64~~6.1>1.11 cannot be opened
    Error opening key - Cannot open keyname: Error while opening key
    Detail: Selected file not found"

    3. Packqge_for_[B3163245~31bf38%6ad364e#5~amd64~~6.1.1.1
    I clicked this key, Registry Editor was stopped.
    And restarted regedit automatically.

    Is there any method for deleting these corrupted keys?

  8. #28
    Moderator
    BSOD Kernel Dump Analyst
    Windows Update Senior Analyst
    softwaremaniac's Avatar
    Join Date
    Oct 2014
    Location
    Croatia
    Age
    22
    Posts
    5,166
    • specs System Specs
      • Motherboard:
        ASRock Fatal1ty P67 Main Board
      • CPU:
        Intel Core i7-2700K 3.5GHz
      • Memory:
        Crucial 2x8GB DDR3 1600 MHz
      • Graphics:
        Gigabyte GTX 1080 G1 Gaming 8 GB
      • Sound Card:
        Asus Xonar DSX
      • Hard Drives:
        WD Caviar Black 1TB SATA III 7200rpm, WD Caviar Black 6TB SATA III 7200rpm
      • Disk Drives:
        Samsung 840 Evo 250GB
      • Power Supply:
        Corsair GS 700W
      • Case:
        Silverstone KL04B Case
      • Cooling:
        CoolerMaster Arctic Freezer 7 Pro
      • Display:
        Philips Brilliance BDM4065UC 4K 3840x2160
      • Operating System:
        Windows 10 Pro 1703 x64

    Re: [7SP1 x64] WU failed, SFCFix could not fix some corruptions.

    Hi,
    thank you for the wishes!

    Step#1 - Disable Windows Update
    1. Click your Start button and type cmd.exe into the search box.
    2. Right-click on cmd that comes up in the search results and select Run as administrator. Click Continue if prompted with the User Account Control dialog.
    3. Copy/Paste the following into the command-prompt window and hit enter. Note: You will have to right-click your mouse in the command-prompt window and select paste. You can't use the keyboard shortcuts.
    sc stop wuauserv && sc config wuauserv start= disabled

    4. You should see something similar to the following. The important parts are in Red. If you see this, you did it correctly.

    Code:
         
    
         SERVICE_NAME: wuauserv
            TYPE               : 20  WIN32_SHARE_PROCESS
            STATE              : 3  STOP_PENDING
                                    (NOT_STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN)
            WIN32_EXIT_CODE    : 0  (0x0)
            SERVICE_EXIT_CODE  : 0  (0x0)
            CHECKPOINT         : 0x1
            WAIT_HINT          : 0x7530
    [SC] ChangeServiceConfig SUCCESS
    It is EXTREMELY important that you do not make any changes to the system configuration or install anything until I tell you to, because this may interfere with my fix and cause severe issues.

    Step#2 - Retrieve Components/Software Hives
    Note: The Software hive has confidential and sensitive information in it so please send me a PM with a link to that particular hive so it's not in the public form.

    • Please download the Freeware RegBak from here: Acelogix Software - Download products
      You will find it at the bottom of the page that the link brings you to.
    • Go ahead and install this program and accept all the defaults. After the last install screen the program should open.
    • Click the New Backup button. Accept the defaults and simply click Start.
    • When it says Finished successfully, click the Close button.
    • This will bring you back to the main screen of the program. You will see one entry in this list with the date that you did it. Right-click on this line-item and select Explore Backup...
    • This will bring you into the folder where the backup was made. You should see a Users folder and a Windows folder along with a couple other files. Double-click on the Windows folder to open it. Then open the System32 folder and then config folder. You should see around 6 files in here, two of which are named COMPONENTS and SOFTWARE.
    • Copy these two files to your Desktop. If the COMPONENTS file does not exist, please fetch it instead from C:\Windows\System32\config\COMPONENTS.
    • Now right click on these files on your desktop and select Send to > Compressed (zipped) folder.
    • Then please upload the zip file(s) to your favourite file sharing websiteand then just provide the link in the PM.
    • You can close any open windows you have as well as the RegBack program now.


    If you have any questions or concerns regarding this, please let me know. Do not rush through the instructions read them carefully and make sure you understand everything fully.
    If I haven't replied to your thread within 48 hours, please send me a Personal Message.

  9. #29

    Re: [7SP1 x64] WU failed, SFCFix could not fix some corruptions.

    Thank you for your reply.

    I did disable Windows Update.

    --------------------------------------------
    Microsoft Windows [Version 6.1.7601]
    Copyright (c) 2009 Microsoft Corporation. All rights reserved.
    C:\Windows\system32>sc stop wuauserv && sc config wuauserv start= disabled
    SERVICE_NAME: wuauserv
    TYPE : 20 WIN32_SHARE_PROCESS
    STATE : 3 STOP_PENDING
    (NOT_STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN)
    WIN32_EXIT_CODE : 0 (0x0)
    SERVICE_EXIT_CODE : 0 (0x0)
    CHECKPOINT : 0x2
    WAIT_HINT : 0x7530
    [SC] ChangeServiceConfig SUCCESS
    C:\Windows\system32>
    --------------------------------------------

    And I got the Software hive and send the upload link by email to you.
    Please check it again.


    Thanks.

  10. #30
    Moderator
    BSOD Kernel Dump Analyst
    Windows Update Senior Analyst
    softwaremaniac's Avatar
    Join Date
    Oct 2014
    Location
    Croatia
    Age
    22
    Posts
    5,166
    • specs System Specs
      • Motherboard:
        ASRock Fatal1ty P67 Main Board
      • CPU:
        Intel Core i7-2700K 3.5GHz
      • Memory:
        Crucial 2x8GB DDR3 1600 MHz
      • Graphics:
        Gigabyte GTX 1080 G1 Gaming 8 GB
      • Sound Card:
        Asus Xonar DSX
      • Hard Drives:
        WD Caviar Black 1TB SATA III 7200rpm, WD Caviar Black 6TB SATA III 7200rpm
      • Disk Drives:
        Samsung 840 Evo 250GB
      • Power Supply:
        Corsair GS 700W
      • Case:
        Silverstone KL04B Case
      • Cooling:
        CoolerMaster Arctic Freezer 7 Pro
      • Display:
        Philips Brilliance BDM4065UC 4K 3840x2160
      • Operating System:
        Windows 10 Pro 1703 x64

    Re: [7SP1 x64] WU failed, SFCFix could not fix some corruptions.

    Hello :)

    Please do the following:

    Step 1:
    SOFTWARE Hive Replacement with RegBak
    Warning: This fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good.




    1. Close all open programs and save all your work. You will need to reboot the machine during this process.
    2. Download the SOFTWARE.ZIP from here.
    3. Right-click on SOFTWARE.ZIP and select Extract All.... Ensure the "Show extracted files when complete" checkbox is checked and click the Extract button.
    4. The software hive will be extracted. You will see the file named SOFTWARE (no extension)
    5. Copy the SOFTWARE hive to where you previously saved a backup. It should be (C:\Windows\RegBak\PC-NAME\DATE\Windows\System32\Config)
    6. Overwrite the one that is currently there when prompted.
    7. Open RegBak by click Start and selecting Registry Backup and Restore. Highlight the backup in the list (it should be the one date today), and press Restore. Click Start. RegBak will reboot your computer to complete the restore process.


    If that goes well, do the following:

    Enable Windows Update
    1. Click your Start button and type cmd.exe into the search box.
    2. Right-click on cmd that comes up in the search results and select Run as administrator. Click Continue if prompted with the User Account Control dialog.
    3. Copy/Paste the following into the command-prompt window and hit enter. Note: You will have to right-click your mouse in the command-prompt window and select paste. You can't use the keyboard shortcuts.
    sc config wuauserv start= delayed-auto && sc start wuauserv

    4. You should see something similar to the following. The important parts are in Red. If you see this, you did it correctly.
    Code:
    [SC] ChangeServiceConfig SUCCESS
    SERVICE_NAME: wuauserv
            TYPE               : 20  WIN32_SHARE_PROCESS
            STATE              : 2  START_PENDING
                                    (NOT_STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN)
            WIN32_EXIT_CODE    : 0  (0x0)
            SERVICE_EXIT_CODE  : 0  (0x0)
            CHECKPOINT         : 0x0
            WAIT_HINT          : 0x7d0
            PID                : 1136
            FLAGS              :
    If I haven't replied to your thread within 48 hours, please send me a Personal Message.

  11. #31

    Re: [7SP1 x64] WU failed, SFCFix could not fix some corruptions.

    Thank you for your correction of SOFTWARE.

    I restore it by RegBak and check corrupted keys deleted.
    [7SP1 x64] WU failed, SFCFix could not fix some corruptions.-amd64_netfx-system-xml_b03f5f7f11d50q3a_6-1-0-0_noneo66615f2-60b3680r-jpg

    After Enable Windows Update and got CheckSUR.log attached.
    CheckSUR.zip

    --------------------------------------------------
    Summary:
    Seconds executed: 5901
    Found 1 errors
    Fixed 1 errors
    CBS MUM Corrupt Total count: 1
    Fixed: CBS MUM Corrupt. Total count: 1
    Fixed: CBS Paired File. Total count: 1
    --------------------------------------------------

    Thanks.

  12. #32
    Moderator
    BSOD Kernel Dump Analyst
    Windows Update Senior Analyst
    softwaremaniac's Avatar
    Join Date
    Oct 2014
    Location
    Croatia
    Age
    22
    Posts
    5,166
    • specs System Specs
      • Motherboard:
        ASRock Fatal1ty P67 Main Board
      • CPU:
        Intel Core i7-2700K 3.5GHz
      • Memory:
        Crucial 2x8GB DDR3 1600 MHz
      • Graphics:
        Gigabyte GTX 1080 G1 Gaming 8 GB
      • Sound Card:
        Asus Xonar DSX
      • Hard Drives:
        WD Caviar Black 1TB SATA III 7200rpm, WD Caviar Black 6TB SATA III 7200rpm
      • Disk Drives:
        Samsung 840 Evo 250GB
      • Power Supply:
        Corsair GS 700W
      • Case:
        Silverstone KL04B Case
      • Cooling:
        CoolerMaster Arctic Freezer 7 Pro
      • Display:
        Philips Brilliance BDM4065UC 4K 3840x2160
      • Operating System:
        Windows 10 Pro 1703 x64

    Re: [7SP1 x64] WU failed, SFCFix could not fix some corruptions.

    Try updates now and attach CBS.log if it fails.
    If I haven't replied to your thread within 48 hours, please send me a Personal Message.

  13. #33

    Re: [7SP1 x64] WU failed, SFCFix could not fix some corruptions.

    Thank you for your reply.

    I tried updates but some programs (KB4034664 ..... KB4054518) are failed.
    CBS.zip

  14. #34
    Moderator
    BSOD Kernel Dump Analyst
    Windows Update Senior Analyst
    softwaremaniac's Avatar
    Join Date
    Oct 2014
    Location
    Croatia
    Age
    22
    Posts
    5,166
    • specs System Specs
      • Motherboard:
        ASRock Fatal1ty P67 Main Board
      • CPU:
        Intel Core i7-2700K 3.5GHz
      • Memory:
        Crucial 2x8GB DDR3 1600 MHz
      • Graphics:
        Gigabyte GTX 1080 G1 Gaming 8 GB
      • Sound Card:
        Asus Xonar DSX
      • Hard Drives:
        WD Caviar Black 1TB SATA III 7200rpm, WD Caviar Black 6TB SATA III 7200rpm
      • Disk Drives:
        Samsung 840 Evo 250GB
      • Power Supply:
        Corsair GS 700W
      • Case:
        Silverstone KL04B Case
      • Cooling:
        CoolerMaster Arctic Freezer 7 Pro
      • Display:
        Philips Brilliance BDM4065UC 4K 3840x2160
      • Operating System:
        Windows 10 Pro 1703 x64

    Re: [7SP1 x64] WU failed, SFCFix could not fix some corruptions.

    Step#1 - Capture Process Monitor Trace
    1. Download and run Process Monitor. Leave this running while you perform the next steps.
    2. Open an elevated Command Prompt and run Windows Updates just like you have in the past. Run only the 405 one
    3. Stop Process Monitor as soon as it fails. You can simply do this by clicking the magnifying glass on the toolbar as shown below.


    4. Select the File menu...Save... and save the file to your desktop. This is likely the default location. The name (unless changed) will be LogFile.PML. This is fine.
    5. Zip up and attach the LogFile.PML file as well as your CBS.log
    If I haven't replied to your thread within 48 hours, please send me a Personal Message.

  15. #35

    Re: [7SP1 x64] WU failed, SFCFix could not fix some corruptions.

    Thank you for your reply.

    I run Process Monitor and tried to update KB4054518, got LogFile.PML and CBS.log

    CBS.zip

    LogFile.zip's link is written in email.

  16. #36
    Moderator
    BSOD Kernel Dump Analyst
    Windows Update Senior Analyst
    softwaremaniac's Avatar
    Join Date
    Oct 2014
    Location
    Croatia
    Age
    22
    Posts
    5,166
    • specs System Specs
      • Motherboard:
        ASRock Fatal1ty P67 Main Board
      • CPU:
        Intel Core i7-2700K 3.5GHz
      • Memory:
        Crucial 2x8GB DDR3 1600 MHz
      • Graphics:
        Gigabyte GTX 1080 G1 Gaming 8 GB
      • Sound Card:
        Asus Xonar DSX
      • Hard Drives:
        WD Caviar Black 1TB SATA III 7200rpm, WD Caviar Black 6TB SATA III 7200rpm
      • Disk Drives:
        Samsung 840 Evo 250GB
      • Power Supply:
        Corsair GS 700W
      • Case:
        Silverstone KL04B Case
      • Cooling:
        CoolerMaster Arctic Freezer 7 Pro
      • Display:
        Philips Brilliance BDM4065UC 4K 3840x2160
      • Operating System:
        Windows 10 Pro 1703 x64

    Re: [7SP1 x64] WU failed, SFCFix could not fix some corruptions.

    The logfile link doesn't work.
    If I haven't replied to your thread within 48 hours, please send me a Personal Message.

  17. #37
    Moderator
    BSOD Kernel Dump Analyst
    Windows Update Senior Analyst
    softwaremaniac's Avatar
    Join Date
    Oct 2014
    Location
    Croatia
    Age
    22
    Posts
    5,166
    • specs System Specs
      • Motherboard:
        ASRock Fatal1ty P67 Main Board
      • CPU:
        Intel Core i7-2700K 3.5GHz
      • Memory:
        Crucial 2x8GB DDR3 1600 MHz
      • Graphics:
        Gigabyte GTX 1080 G1 Gaming 8 GB
      • Sound Card:
        Asus Xonar DSX
      • Hard Drives:
        WD Caviar Black 1TB SATA III 7200rpm, WD Caviar Black 6TB SATA III 7200rpm
      • Disk Drives:
        Samsung 840 Evo 250GB
      • Power Supply:
        Corsair GS 700W
      • Case:
        Silverstone KL04B Case
      • Cooling:
        CoolerMaster Arctic Freezer 7 Pro
      • Display:
        Philips Brilliance BDM4065UC 4K 3840x2160
      • Operating System:
        Windows 10 Pro 1703 x64

    Re: [7SP1 x64] WU failed, SFCFix could not fix some corruptions.

    Step#1 - FRST Fix
    NOTICE: This script was written specifically for this user, for use on that particular machine. Running this on another machine may cause damage to your operating system
    1. Please download Farbar Recovery Scan Tool and save it to your Desktop.
    Note: You need to run the 64-bit Version so please ensure you download that one.
    2. Download attached file and save it to the Desktop.
    Note. It's important that both files, FRST64 and fixlist.txt are in the same location or the fix will not work (in this case...the desktop).
    3. Run FRST64 by Right-Clicking on the file and choosing Run as administrator.
    4. Press the Fix button just once and wait. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
    5. When finished FRST64 will generate a log on the Desktop (Fixlog.txt). Please post the contents of it in your reply
    Attached Files Attached Files
    If I haven't replied to your thread within 48 hours, please send me a Personal Message.

  18. #38

    Re: [7SP1 x64] WU failed, SFCFix could not fix some corruptions.

    Thank you for your reply.

    I run FRST64 with fixlist.txt and got Fixlog.txt.
    Fixlog.txt

    Then I tried to update KB4056894 only, got error 80070057.

  19. #39
    Moderator
    BSOD Kernel Dump Analyst
    Windows Update Senior Analyst
    softwaremaniac's Avatar
    Join Date
    Oct 2014
    Location
    Croatia
    Age
    22
    Posts
    5,166
    • specs System Specs
      • Motherboard:
        ASRock Fatal1ty P67 Main Board
      • CPU:
        Intel Core i7-2700K 3.5GHz
      • Memory:
        Crucial 2x8GB DDR3 1600 MHz
      • Graphics:
        Gigabyte GTX 1080 G1 Gaming 8 GB
      • Sound Card:
        Asus Xonar DSX
      • Hard Drives:
        WD Caviar Black 1TB SATA III 7200rpm, WD Caviar Black 6TB SATA III 7200rpm
      • Disk Drives:
        Samsung 840 Evo 250GB
      • Power Supply:
        Corsair GS 700W
      • Case:
        Silverstone KL04B Case
      • Cooling:
        CoolerMaster Arctic Freezer 7 Pro
      • Display:
        Philips Brilliance BDM4065UC 4K 3840x2160
      • Operating System:
        Windows 10 Pro 1703 x64

    Re: [7SP1 x64] WU failed, SFCFix could not fix some corruptions.

    Attach CBS.log
    If I haven't replied to your thread within 48 hours, please send me a Personal Message.

  20. #40

    Re: [7SP1 x64] WU failed, SFCFix could not fix some corruptions.

    Thank you for your replay.

    CBS.log is attached.

    CBS.zip

Page 2 of 3 First 123 Last

Similar Threads

  1. Windows 7SP1 to Windows 10 upgrade fails with C190011F
    By dvenus in forum Windows Update
    Replies: 3
    Last Post: 05-26-2016, 02:34 PM
  2. SFCFix.exe could not fix corruptions automatically
    By bguenther in forum Windows Update
    Replies: 1
    Last Post: 05-30-2015, 11:31 AM
  3. SFCFix.exe cannot repair all the corruptions
    By MicoMaco in forum Windows Update
    Replies: 1
    Last Post: 05-25-2015, 06:15 PM
  4. [SOLVED] SFCFix could not fix corruptions
    By Ulysses in forum Windows Update
    Replies: 5
    Last Post: 08-18-2014, 08:55 PM
  5. 18 corruptions counted by SFCFix Help!!!
    By Geniu in forum Windows Update
    Replies: 0
    Last Post: 07-21-2014, 03:07 PM

Log in

Log in