Page 1 of 4 1234 Last
  1. #1

    need help

    first time asking for help
    so please bear with me

    it asked me to upload my cbs and dism logs

    i also tried the sfcfix program

    got
    Code:
    Checking CheckSUR.log . . .
    Checking CheckSUR.persist.log . . .
    
    
    Attempting repair . . .
    Stage 1
    Stage 2
    Stage 3
    
    
    Due to the nature of your corruptions, scan times have been extended by
    approximately 15-20 minutes. Please be patient and allow the operation to
    complete.
    
    
    
    
    Deployment Image Servicing and Management tool
    Version: 10.0.14393.0
    
    
    Image Version: 10.0.14393.0
    
    
    [=====                      9.0%                           ]
    Error: 1726
    
    
    The remote procedure call failed.
    
    
    The DISM log file can be found at C:\WINDOWS\Logs\DISM\dism.log
    doesn't look like got far enough for log on that
    (let it run for 1 hour)

    not sure where go now

    thanks in advance
    troy
    Attached Files Attached Files


    • Ad Bot

      advertising
      Beep.

        
       

  2. #2

    Re: need help

    is windows 10 enterpise on a dell latitude laptop
    anything else need info wise please ask

  3. #3
    zcomputerwiz's Avatar
    Join Date
    Jan 2015
    Location
    USA
    Posts
    4,270

    Re: need help

    Code:
    2017-01-08 04:12:46, Error                 CSI    00001cdc (F) STATUS_OBJECT_NAME_NOT_FOUND #3779603# from Windows::Rtl::SystemImplementation::DirectFileSystemProvider::SysCreateFile(flags = (AllowSharingViolation), handle = {provider=NULL, handle=0, name= ("null")}, da = (SYNCHRONIZE|FILE_READ_ATTRIBUTES), oa = @0x2ea8c7b6b0->OBJECT_ATTRIBUTES {s:48; rd:NULL; on:[121]'\??\C:\WINDOWS\WinSxS\amd64_microsoft-windows-f..etype-yugothiclight_31bf3856ad364e35_10.0.14393.82_none_326eb39ed6110748'; a:(OBJ_CASE_INSENSITIVE)}, iosb = @0x2ea8c7b690, as = (null), fa = 0, sa = (FILE_SHARE_READ|FILE_SHARE_WRITE|FILE_SHARE_DELETE), cd = FILE_OPEN, co = (FILE_SYNCHRONOUS_IO_NONALERT|0x00004000), eab = NULL, eal = 0, disp = Invalid)
    [gle=0xd0000034]
    2017-01-08 04:12:46, Error                 CSI    00001cdd@2017/1/8:10:12:46.706 (F) onecore\base\wcp\sil\merged\ntu\ntsystem.cpp(2898): Error STATUS_OBJECT_NAME_NOT_FOUND originated in function Windows::Rtl::SystemImplementation::DirectFileSystemProvider::SysCreateFile expression: (null)
    [gle=0x80004005]
    2017-01-08 04:12:46, Info                  CBS    Added C:\WINDOWS\Logs\CBS\CBS.log to WER report.
    2017-01-08 04:12:46, Info                  CBS    Could not get active session for current session file logging [HRESULT = 0x80004003 - E_POINTER]
    2017-01-08 04:12:46, Info                  CBS    Not able to add pending.xml to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
    2017-01-08 04:12:46, Info                  CBS    Not able to add pending.xml.bad to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
    2017-01-08 04:12:46, Info                  CBS    Not able to add poqexec.log to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
    2017-01-08 04:12:51, Error                 CSI    00001cde (F) STATUS_OBJECT_NAME_NOT_FOUND #3779602# from Windows::Rtl::SystemImplementation::CDirectory::OpenExistingDirectory(...)[gle=0xd0000034]
    2017-01-08 04:12:51, Error                 CSI    00001cdf (F) STATUS_OBJECT_NAME_NOT_FOUND #3779601# from Windows::Rtl::SystemImplementation::CDirectory_IRtlDirectoryTearoff::OpenExistingDirectory(flags = 0, da = (SYNCHRONIZE), oa = @0x2ea8c7c0d0->SIL_OBJECT_ATTRIBUTES {s:40; on:"amd64_microsoft-windows-f..etype-yugothiclight_31bf3856ad364e35_10.0.14393.82_none_326eb39ed6110748"; a:(OBJ_CASE_INSENSITIVE)}, sa = (FILE_SHARE_READ|FILE_SHARE_WRITE|FILE_SHARE_DELETE), oo = (FILE_DIRECTORY_FILE|FILE_SYNCHRONOUS_IO_NONALERT|FILE_OPEN_FOR_BACKUP_INTENT), dir = NULL, disp = Invalid)
    [gle=0xd0000034]
    Let's check your disk health.

    GSmartControl
    Follow the instructions below to test your hard drive health with GSmartControl:

    • Download GSmartControl and save it on your Desktop;
    • Extract the content of the GSmartControl .zip archive and execute gsmartcontrol.exe; To extract you can right-click your mouse on the GSmartControl.zip file and select Extract.
    • Identify your drive in the list, and double-click on it to bring up it's window (usually you'll find your drive by it's size or it's brand name);
    • Go in the Perform Tests tab, then select Extended Self-test in the Test type drop-down list and click on Execute (this test can take a few hours to complete);
    • Once the test is over, the results will be displayed at the bottom of the window. Please copy and paste these results in your next reply;
    • Also, go in the Attributes tab and if you have any entries highlighted in red or pink, copy and paste their name in your next reply (or take a screenshot of the GSmartControl window and attach it in your next reply);
    I am usually online 1PM - 4PM CST Monday - Friday.
    If your thread has not received a new reply within 3 days, please make a post here: Not Received Help? so another helper can continue to assist you.

  4. #4

    Re: need help

    running test now it a ssd hard drive

  5. #5

    Re: need help

    here what i got at first from logs

    smartctl 5.43 2012-06-30 r3573 [i686-w64-mingw32-win8(64)] (sf-5.43-1)Copyright (C) 2002-12 by Bruce Allen, smartmontools


    === START OF INFORMATION SECTION ===
    Model Family: Western Digital Scorpio Black
    Device Model: WDC WD3200BEKT-75PVMT1
    Serial Number: WD-WXB1A72C4340
    LU WWN Device Id: 5 0014ee 6ad4fa309
    Firmware Version: 01.01A01
    User Capacity: 320,072,933,376 bytes [320 GB]
    Sector Size: 512 bytes logical/physical
    Device is: In smartctl database [for details use: -P show]
    ATA Version is: 8
    ATA Standard is: Exact ATA specification draft version not indicated
    Local Time is: Tue Jan 10 11:41:38 2017 CST
    SMART support is: Available - device has SMART capability.
    SMART support is: Enabled


    === START OF READ SMART DATA SECTION ===
    SMART overall-health self-assessment test result: PASSED


    General SMART Values:
    Offline data collection status: (0x00) Offline data collection activity
    was never started.
    Auto Offline Data Collection: Disabled.
    Self-test execution status: ( 121) The previous self-test completed having
    the read element of the test failed.
    Total time to complete Offline
    data collection: ( 5880) seconds.
    Offline data collection
    capabilities: (0x7b) SMART execute Offline immediate.
    Auto Offline data collection on/off support.
    Suspend Offline collection upon new
    command.
    Offline surface scan supported.
    Self-test supported.
    Conveyance Self-test supported.
    Selective Self-test supported.
    SMART capabilities: (0x0003) Saves SMART data before entering
    power-saving mode.
    Supports SMART auto save timer.
    Error logging capability: (0x01) Error logging supported.
    General Purpose Logging supported.
    Short self-test routine
    recommended polling time: ( 2) minutes.
    Extended self-test routine
    recommended polling time: ( 61) minutes.
    Conveyance self-test routine
    recommended polling time: ( 5) minutes.
    SCT capabilities: (0x7035) SCT Status supported.
    SCT Feature Control supported.
    SCT Data Table supported.


    SMART Attributes Data Structure revision number: 16
    Vendor Specific SMART Attributes with Thresholds:
    ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
    1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 1978
    3 Spin_Up_Time 0x0027 163 154 021 Pre-fail Always - 825
    4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 854
    5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
    7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
    9 Power_On_Hours 0x0032 070 070 000 Old_age Always - 22411
    10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
    11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
    12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 852
    191 G-Sense_Error_Rate 0x0032 001 001 000 Old_age Always - 3628
    192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 364
    193 Load_Cycle_Count 0x0032 058 058 000 Old_age Always - 426628
    194 Temperature_Celsius 0x0022 102 088 000 Old_age Always - 41
    196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
    197 Current_Pending_Sector 0x0032 200 199 000 Old_age Always - 4
    198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
    199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
    200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
    240 Head_Flying_Hours 0x0032 071 071 000 Old_age Always - 21572
    241 Total_LBAs_Written 0x0032 200 200 000 Old_age Always - 40378836320
    242 Total_LBAs_Read 0x0032 200 200 000 Old_age Always - 48628939928
    254 Free_Fall_Sensor 0x0032 192 192 000 Old_age Always - 8


    SMART Error Log Version: 1
    No Errors Logged


    SMART Self-test log structure revision number 1
    Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
    # 1 Extended offline Completed: read failure 90% 22411 481539696
    # 2 Short offline Completed without error 00% 17072 -
    # 3 Short offline Completed without error 00% 16033 -
    # 4 Short offline Completed without error 00% 16014 -
    # 5 Short offline Completed without error 00% 15907 -
    # 6 Short offline Completed without error 00% 15237 -
    # 7 Short offline Completed without error 00% 15230 -


    SMART Selective self-test log data structure revision number 1
    SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
    1 0 0 Not_testing
    2 0 0 Not_testing
    3 0 0 Not_testing
    4 0 0 Not_testing
    5 0 0 Not_testing
    Selective self-test flags (0x0):
    After scanning selected spans, do NOT read-scan remainder of disk.
    If Selective self-test is pending on power-up, resume after 0 minute delay.

  6. #6

    Re: need help

    ok it had an enable auto offline setting i checked it and running test again
    it LOOKS like that may been what needed will post differences when done

  7. #7
    zcomputerwiz's Avatar
    Join Date
    Jan 2015
    Location
    USA
    Posts
    4,270

    Re: need help

    Edit:

    Looks like that is a Western Digital conventional hard drive. I see some current pending sectors (4?)

    Code:
    197 Current_Pending_Sector 0x0032 200 199 000 Old_age Always - 4
    Please check the graphical display for this line item, is it highlighted in pink?

    For an SSD that particular test will not be needed. Let's check the filesystem next.

    chkdsk /f

    Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

    1. Click on the Start button and in the search box, type Command Prompt
    2. When you see Command Prompt on the list, right-click on it and select Run as administrator
    3. When command prompt opens, copy and paste the following commands into it, press enter after each

      chkdsk /f

    4. Reboot
    5. Download ListChkdskResult.exe (by SleepyDude) from the link below:

      https://dl.dropboxusercontent.com/u/...kdskResult.exe
    6. Double click on it to run it. It will take a few seconds to scan, then it will open a Notepad window with the log. Copy and paste the contents of this into your next post please!

    Last edited by zcomputerwiz; 01-10-2017 at 01:58 PM.
    I am usually online 1PM - 4PM CST Monday - Friday.
    If your thread has not received a new reply within 3 days, please make a post here: Not Received Help? so another helper can continue to assist you.

  8. #8

    Re: need help

    this second run

    smartctl 5.43 2012-06-30 r3573 [i686-w64-mingw32-win8(64)] (sf-5.43-1)Copyright (C) 2002-12 by Bruce Allen, smartmontools


    === START OF INFORMATION SECTION ===
    Model Family: Western Digital Scorpio Black
    Device Model: WDC WD3200BEKT-75PVMT1
    Serial Number: WD-WXB1A72C4340
    LU WWN Device Id: 5 0014ee 6ad4fa309
    Firmware Version: 01.01A01
    User Capacity: 320,072,933,376 bytes [320 GB]
    Sector Size: 512 bytes logical/physical
    Device is: In smartctl database [for details use: -P show]
    ATA Version is: 8
    ATA Standard is: Exact ATA specification draft version not indicated
    Local Time is: Tue Jan 10 11:52:30 2017 CST
    SMART support is: Available - device has SMART capability.
    SMART support is: Enabled


    === START OF READ SMART DATA SECTION ===
    SMART overall-health self-assessment test result: PASSED


    General SMART Values:
    Offline data collection status: (0x80) Offline data collection activity
    was never started.
    Auto Offline Data Collection: Enabled.
    Self-test execution status: ( 121) The previous self-test completed having
    the read element of the test failed.
    Total time to complete Offline
    data collection: ( 5880) seconds.
    Offline data collection
    capabilities: (0x7b) SMART execute Offline immediate.
    Auto Offline data collection on/off support.
    Suspend Offline collection upon new
    command.
    Offline surface scan supported.
    Self-test supported.
    Conveyance Self-test supported.
    Selective Self-test supported.
    SMART capabilities: (0x0003) Saves SMART data before entering
    power-saving mode.
    Supports SMART auto save timer.
    Error logging capability: (0x01) Error logging supported.
    General Purpose Logging supported.
    Short self-test routine
    recommended polling time: ( 2) minutes.
    Extended self-test routine
    recommended polling time: ( 61) minutes.
    Conveyance self-test routine
    recommended polling time: ( 5) minutes.
    SCT capabilities: (0x7035) SCT Status supported.
    SCT Feature Control supported.
    SCT Data Table supported.


    SMART Attributes Data Structure revision number: 16
    Vendor Specific SMART Attributes with Thresholds:
    ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
    1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 1978
    3 Spin_Up_Time 0x0027 163 154 021 Pre-fail Always - 825
    4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 854
    5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
    7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
    9 Power_On_Hours 0x0032 070 070 000 Old_age Always - 22411
    10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
    11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
    12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 852
    191 G-Sense_Error_Rate 0x0032 001 001 000 Old_age Always - 3628
    192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 364
    193 Load_Cycle_Count 0x0032 058 058 000 Old_age Always - 426628
    194 Temperature_Celsius 0x0022 102 088 000 Old_age Always - 41
    196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
    197 Current_Pending_Sector 0x0032 200 199 000 Old_age Always - 4
    198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
    199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
    200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
    240 Head_Flying_Hours 0x0032 071 071 000 Old_age Always - 21572
    241 Total_LBAs_Written 0x0032 200 200 000 Old_age Always - 40378949412
    242 Total_LBAs_Read 0x0032 200 200 000 Old_age Always - 48629260686
    254 Free_Fall_Sensor 0x0032 192 192 000 Old_age Always - 8


    SMART Error Log Version: 1
    No Errors Logged


    SMART Self-test log structure revision number 1
    Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
    # 1 Extended offline Completed: read failure 90% 22411 481539803
    # 2 Extended offline Completed: read failure 90% 22411 481539696
    # 3 Short offline Completed without error 00% 17072 -
    # 4 Short offline Completed without error 00% 16033 -
    # 5 Short offline Completed without error 00% 16014 -
    # 6 Short offline Completed without error 00% 15907 -
    # 7 Short offline Completed without error 00% 15237 -
    # 8 Short offline Completed without error 00% 15230 -


    SMART Selective self-test log data structure revision number 1
    SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
    1 0 0 Not_testing
    2 0 0 Not_testing
    3 0 0 Not_testing
    4 0 0 Not_testing
    5 0 0 Not_testing
    Selective self-test flags (0x0):
    After scanning selected spans, do NOT read-scan remainder of disk.
    If Selective self-test is pending on power-up, resume after 0 minute delay.
    sorry if no help only did like 10%

  9. #9

    Re: need help

    was in pink

  10. #10

    Re: need help

    need to walk to store may be hour or so

  11. #11
    zcomputerwiz's Avatar
    Join Date
    Jan 2015
    Location
    USA
    Posts
    4,270

    Re: need help

    Code:
    # 1 Extended offline Completed: read failure 90% 22411 481539803
    # 2 Extended offline Completed: read failure 90% 22411 481539696
    Looks like the disk has failed the extended self test.

    Follow the instructions here to download and install Western Digital Data Lifeguard Diagnostic for Windows: Software and Firmware Downloads | WD Support

    Once the tool has been installed, choose the extended test option in the Data Lifeguard Diagnostic. This will take approximately an hour per terabyte. When the test has completed, choose the option to repair any detected bad sectors.

    Let me know the result.
    I am usually online 1PM - 4PM CST Monday - Friday.
    If your thread has not received a new reply within 3 days, please make a post here: Not Received Help? so another helper can continue to assist you.

  12. #12

    Re: need help

    running now

  13. #13

    Re: need help

    is 320 gb so shouldn't be too long

  14. #14

    Re: need help

    trying repair now

  15. #15

    Re: need help

    said unable to repair

  16. #16

    Re: need help

    let me try 1 more time

  17. #17

    Re: need help

    trying as admin

  18. #18
    zcomputerwiz's Avatar
    Join Date
    Jan 2015
    Location
    USA
    Posts
    4,270

    Re: need help

    Hmm... It may need to be tried from bootable media.

    You could follow the instructions here to create a USB boot drive with the DLG tools: Software and Firmware Downloads | WD Support
    I am usually online 1PM - 4PM CST Monday - Friday.
    If your thread has not received a new reply within 3 days, please make a post here: Not Received Help? so another helper can continue to assist you.

  19. #19

    Re: need help

    Think chkdsk /f help?

  20. #20

    Re: need help

    trying the usb thing it in freedos
    says no drive found
    error/status code : 0120

Page 1 of 4 1234 Last

Log in

Log in