[SOLVED] Windows 10 AU 1607 update fails - DISM error 0x80010108

litepurple · Oct 6, 2016

Hello,
It's been a while. I'm hoping someone can help. My parents' PC is running Windows 10 though the automatic update to Anniversary 1607 fails to automatically install each day.
I've run the following:
- Windows Update Troubleshooter
- sfc /scannow - Windows Resource Protection found corrupt files but was unable to fix some of them
- Dism /Online /Cleanup-Image /RestoreHealth - Error: 0x80010108 The object invoked has disconnected from its clients.
I've run SFCFix.exe and it produced the following output:
Welcome to SFCFix by niemiro and sysnative.com.
Checking for updates . . .
No new update is available at this time.
Processing directive 1 of 1 (AutoAnalysis::)
Checking store directories . . .
Checking CBS.log . . .
Checking CheckSUR.log . . .
Checking CheckSUR.persist.log . . .
Attempting repair . . .
Stage 1
Stage 2
Stage 3
Due to the nature of your corruptions, scan times have been extended by
approximately 15-20 minutes. Please be patient and allow the operation to
complete.
Deployment Image Servicing and Management tool
Version: 10.0.10586.0
Image Version: 10.0.10586.0
[=========== 20.0% ]
Error: 0x80010108
The object invoked has disconnected from its clients.
An error occurred closing a servicing component in the image.
Wait a few minutes and try running the command again.
The DISM log file can be found at C:\WINDOWS\Logs\DISM\dism.log

Any help would be gratefully received!
Thanks, LP
View attachment dism.zip
View attachment CBS.zip
View attachment SFCFix.txt

Aura · Oct 8, 2016

Hi litepurple,

Do you still need assistance with this issue?

litepurple · Oct 9, 2016

Yes please, Aura. I'm quite stuck as to how to fix this issue. Thanks!

Aura · Oct 9, 2016

Have you tried installing the AU update via the Media Creation Tool?

Windows 10 ISO

litepurple · Oct 9, 2016

Not yet, I live on the other side of the world from my parents so I do my tech support remotely. They're not particularly tech savvy. I was wondering if there were a fix I could do remotely before I go down the path of talking them through creating a media key. Is there something else straightforward I could do?

Thanks.

Aura · Oct 10, 2016

Can you give me the error code with which the AU fails to install?

litepurple · Oct 10, 2016

It just says "Failed to Install" See attached screenshot. Any ideas? I can't see an error code, unfortunately. Thanks!

Aura · Oct 10, 2016

Alright, provide me these two logs please.

C:\Windows\Panther\setupact.log
C:\Windows\Panther\setuperr.log

litepurple · Oct 10, 2016

Thanks Aura.

Attached.
View attachment setupact.zip
View attachment setuperr.zip

Aura · Oct 12, 2016

Can you try to install it using the Media Creation Tool? If it fails, let me know if it returns an error code. I think I have part of it (0xC190010E), but I want to confirm.

Windows 10 ISO

litepurple · Oct 15, 2016

Thanks Aura,

I might be a few days in getting back to you as I'll have to see if my parents have a USB memory stick. If not, I'll ask them to get hold of one.

LP

Aura · Oct 15, 2016

All good, I'll be waiting :)

litepurple · Oct 17, 2016

Hi Aura,
Before I tried with the MCT, I could see upgrade error 0x80240fff in the logs.
I've tried with the MCT tool and booted setup from the USB stick, with the following error: "set-up couldn't start properly. Pleas reboot your PC and run set up again"
I've rebooted but I get the same error

Aura · Oct 18, 2016

In order to upgrade, you need to launch the setup from within Windows. If you boot from the USB, you need to do a clean install, not an upgrade.

litepurple · Oct 18, 2016

Thanks Aura,
I did try to run setup to perform the upgrade from the USB stick, both times from within Windows by running setup from within File Explorer.

Aura · Oct 20, 2016

Try the instructions in the link below, and see if it works after.

Setup couldn’t start properly, Please reboot your PC and run set up again

litepurple · Oct 24, 2016

Sorry, I've been away for a few days. I'll give this a try in the next couple of days and let you know how I get on. Thanks.

litepurple · Nov 5, 2016

Sorry it's taken so long... I'm only able to do this at the weekends due to the time zone differences and me needing my dad there at the other end to do the plugging and unplugging!

Anyway, I've followed those instructions and also run Windows Cleanup to remove the temporary Windows update files and also Windows update troubleshoot er to clean up store corruption. The result is that sfc /scannow finds no corruption and nor does sfcfix.exe. However, I still have exactly the same issues trying to get the Anniversary Update to install. In Settings/Update, there's the following error message: "If Windows 10 is unable to install Windows Updates due to "We can't install some updates because other updates are in progress"

When I try to install from the USB media I've created, a few times, I get "Setup Couldn't Start Properly. Please Reboot Your PC" - Despite rebooting multiple times.

Any ideas? I'm completely stuck, to be honest.

Thanks for your help! LP.

BrianDrab · Nov 20, 2016

I'll pick this up today. Be back with you shortly.

BrianDrab · Nov 20, 2016

First thing I would like you to do is...

1. Click Download Tool Now from the following link and save this to your desktop.
Windows 10

2. If you are asked to overwrite the existing file, please do. Then go ahead and open this file (MediaCreationTool.exe).
3. Accept the terms. When asked What do you want to do please select "Create installation media for another PC" and click Next.
4. Click Next to confirm the Language, Edition and Architecture that is on the PC.
5. At the "Choose which media to use" please select ISO file and click next.
6. Browse to your desktop and save this Windows.iso file.
7. Once it finishes downloading, go ahead and double-click on the Windows.iso file. It should mount and open in File Explorer. You will see a bunch of files/folders. Double-click on setup.exe and attempt the upgrade.

Let me know how it goes. If any errors appear, please note them and let me know what they are.

[SOLVED] Windows 10 AU 1607 update fails - DISM error 0x80010108

Contributor

Sysnative Staff, Security Analyst

Contributor

Sysnative Staff, Security Analyst

Contributor

Sysnative Staff, Security Analyst

Contributor

Sysnative Staff, Security Analyst

Contributor

Sysnative Staff, Security Analyst

Contributor

Sysnative Staff, Security Analyst

Contributor

Sysnative Staff, Security Analyst

Contributor

Sysnative Staff, Security Analyst

Contributor

Contributor

Emeritus

Emeritus