[SOLVED] another sfc/scannow cannot fix error

oah · Jun 28, 2016

After running sfc scannow and then ScanFix I have the following log and am asking for assistance. Hopefully I am posting the correct file.

SFCFix version 3.0.0.0 by niemiro.
Start time: 2016-06-28 17:16:59.862
Microsoft Windows 7 Service Pack 1 - amd64
Not using a script file.

AutoAnalysis::
CORRUPT: C:\Windows\winsxs\amd64_microsoft-windows-com-dtc-runtime_31bf3856ad364e35_6.1.7600.16385_none_7547f48c79b40229\MSDTC.LOG

SUMMARY: Some corruptions could not be fixed automatically. Seek advice from helper or sysnative.com.
CBS & SFC total detected corruption count: 2209
CBS & SFC total unimportant corruption count: 0
CBS & SFC total fixed corruption count: 0
SURT total detected corruption count: 0
SURT total unimportant corruption count: 0
SURT total fixed corruption count: 0
AutoAnalysis:: directive completed successfully.

Successfully processed all directives.

Failed to generate a complete zip file. Upload aborted.

SFCFix version 3.0.0.0 by niemiro has completed.
Currently storing 1 datablocks.
Finish time: 2016-06-28 17:38:26.188
----------------------EOF-----------------------

oah · Jun 29, 2016

Not sure if I needed to add the attachment.

BrianDrab · Jun 30, 2016

There is a lot of corruption here. Do you happen to have your Windows 7 x64 with SP1 CD/DVD?

Also, please run the following.

Step#1 - System Update Readiness Tool (SUR)
1. Download and run the following file.
2. When it asks you if you wish to install, please answer yes. Note: It could take 15 minutes or more to run. Please don't cancel.
3. You will get an Installation Complete screen when it's done running.
4. Please attach the log from the following location. C:\Windows\Logs\CBS\CheckSUR.log
Please Note:: if the file is too big to upload to your next post please upload via a service such as Dropbox or One Drive or SendSpace and just provide the link.

oah · Jun 30, 2016

BrianDrab said:
There is a lot of corruption here. Do you happen to have your Windows 7 x64 with SP1 CD/DVD?

Also, please run the following.

Step#1 - System Update Readiness Tool (SUR)
1. Download and run the following file.
2. When it asks you if you wish to install, please answer yes. Note: It could take 15 minutes or more to run. Please don't cancel.
3. You will get an Installation Complete screen when it's done running.
4. Please attach the log from the following location. C:\Windows\Logs\CBS\CheckSUR.log
Please Note:: if the file is too big to upload to your next post please upload via a service such as Dropbox or One Drive or SendSpace and just provide the link.

Originally my system was XP and I used an upgrade disc to install windows 7 ultimate. I did try to upgrade to windows 10 but discovered my motherboard was not compatible. 8 months ago my system crashed and a computer shop installed windows 7 again so I don't have a disc, however I have downloaded a disc with windows 7 ultimate with SP1.

I have just downloaded SUR and will post the results.

oah · Jul 1, 2016

oah said:
BrianDrab said:

There is a lot of corruption here. Do you happen to have your Windows 7 x64 with SP1 CD/DVD?

Also, please run the following.

Step#1 - System Update Readiness Tool (SUR)
1. Download and run the following file.
2. When it asks you if you wish to install, please answer yes. Note: It could take 15 minutes or more to run. Please don't cancel.
3. You will get an Installation Complete screen when it's done running.
4. Please attach the log from the following location. C:\Windows\Logs\CBS\CheckSUR.log
Please Note:: if the file is too big to upload to your next post please upload via a service such as Dropbox or One Drive or SendSpace and just provide the link.

Click to expand...

Originally my system was XP and I used an upgrade disc to install windows 7 ultimate. I did try to upgrade to windows 10 but discovered my motherboard was not compatible. 8 months ago my system crashed and a computer shop installed windows 7 again so I don't have a disc, however I have downloaded a disc with windows 7 ultimate with SP1.

I have just downloaded SUR and will post the results.

View attachment CheckSUR.log

BrianDrab · Jul 1, 2016

Thanks for the information. There were some fixes that were made which is good but I'll need a fresh log. Please run SURT again and post the updated CheckSUR.log.

oah · Jul 1, 2016

BrianDrab said:
Thanks for the information. There were some fixes that were made which is good but I'll need a fresh log. Please run SURT again and post the updated CheckSUR.log.

I tried to run it again but I kept getting an error message so I did a system restore to where I did the first SURT. Reinstalling now but it has been in the install mode for 6 hours. It has seems to have stalled around the 95% mark but the CPU usage is still showing increased usage. I will let it run for a few more hours and see how it goes.

oah · Jul 2, 2016

oah said:
BrianDrab said:

Thanks for the information. There were some fixes that were made which is good but I'll need a fresh log. Please run SURT again and post the updated CheckSUR.log.

Click to expand...

I tried to run it again but I kept getting an error message so I did a system restore to where I did the first SURT. Reinstalling now but it has been in the install mode for 6 hours. It has seems to have stalled around the 95% mark but the CPU usage is still showing increased usage. I will let it run for a few more hours and see how it goes.

I persisted and it took another 2 hours. I then did the second SURT as requested which took 5 more hours.

Results attached.View attachment CheckSUR.log

BrianDrab · Jul 2, 2016

Excellent. Please don't do a System Restore without checking with me first while we are working on your machine. I may have been able to give you another way to do this. I'll review the log and be back with you.

BrianDrab · Jul 2, 2016

OK, please start with the following.

Step#1 - SFCFix Script
Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

Download SFCFix.exe (by niemiro) and save this to your Desktop. If you still have this on your desktop from downloading previously, you don't need to re-download.
Download the file below, SFCFix.zip, and save this to your Desktop. Ensure that this file is named SFCFix.zip - do not rename it.
Save any open documents and close all open windows.
On your Desktop, you should see two files: SFCFix.exe and SFCFix.zip.
Drag the file SFCFix.zip onto the file SFCFix.exe and release it.
SFCFix will now process the script.
Upon completion, a file should be created on your Desktop: SFCFix.txt.
Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this file into your next post for me to analyse please

oah · Jul 2, 2016

SFCFix.zip failed to run and I received an ERROR message saying the zip file was corrupt and to download again and retry. Did so and the same message appeared.

SFCFix version 3.0.0.0 by niemiro.
Start time: 2016-07-03 12:19:09.125
Microsoft Windows 7 Service Pack 1 - amd64
Using .zip script file at C:\Users\philp\Desktop\SFCFix (1).zip [0]
Failed to extract zip archive. Failed to unzip in location 2 with error code 0x80004005.

Successfully processed all directives.
SFCFix version 3.0.0.0 by niemiro has completed.
Currently storing 1 datablocks.
Finish time: 2016-07-03 12:19:12.432
Script hash: 2RmNaPRHUzFoA+YDhbhcahxWdEZDWG1VNFJjStw5OwM=
----------------------EOF-----------------------

BrianDrab · Jul 2, 2016

OK, let's just do it manually then.

Step#1 - Fix Corrupt/Missing Files
Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

Please download the attached file, Packs.zip and save this to your Desktop.
Right-click on the file and select Extract All...
Tick the box labelled Show extracted files when complete then click Extract
A window will open showing two folders, Manifests and Packages
Open the Manifests folder and copy the files into the following folder. If the Manifests folder doesn't exist within Winsxs you will need to create it.
C:\Windows\Temp\CheckSur\Winsxs\Manifests
Open the Packages folder and copy the files into the following folder. If the Packages folder doesn't exist within Servicing you will need to create it.
C:\Windows\Temp\CheckSur\Servicing\Packages
Run the System Update Readiness Tool (SURT) again.
When the SURT finishes installing, zip up and attach the following log file:
C:\Windows\Logs\CBS\CheckSUR.log

oah · Jul 3, 2016

Done. File attached.View attachment CheckSUR.rar

BrianDrab · Jul 3, 2016

Thanks. Here's the next batch.

Step#1 - Fix Corrupt/Missing Files
Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

Please download the attached file, Packs.zip and save this to your Desktop.
Right-click on the file and select Extract All...
Tick the box labelled Show extracted files when complete then click Extract
A window will open showing two folders, Manifests and Packages
Open the Manifests folder and copy the files into the following folder. If the Manifests folder doesn't exist within Winsxs you will need to create it.
C:\Windows\Temp\CheckSur\Winsxs\Manifests
Open the Packages folder and copy the files into the following folder. If the Packages folder doesn't exist within Servicing you will need to create it.
C:\Windows\Temp\CheckSur\Servicing\Packages
Run the System Update Readiness Tool (SURT) again.
When the SURT finishes installing, zip up and attach the following log file:
C:\Windows\Logs\CBS\CheckSUR.log

oah · Jul 3, 2016

Done. File attacheView attachment CheckSUR.rard.

BrianDrab · Jul 3, 2016

Another Batch.

Step#1 - Fix Corrupt/Missing Files
Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

Please download the attached file, Packs.zip and save this to your Desktop.
Right-click on the file and select Extract All...
Tick the box labelled Show extracted files when complete then click Extract
A window will open showing two folders, Manifests and Packages
Open the Manifests folder and copy the files into the following folder. If the Manifests folder doesn't exist within Winsxs you will need to create it.
C:\Windows\Temp\CheckSur\Winsxs\Manifests
Open the Packages folder and copy the files into the following folder. If the Packages folder doesn't exist within Servicing you will need to create it.
C:\Windows\Temp\CheckSur\Servicing\Packages
Run the System Update Readiness Tool (SURT) again.
When the SURT finishes installing, zip up and attach the following log file:
C:\Windows\Logs\CBS\CheckSUR.log

oah · Jul 4, 2016

Done. File attached. View attachment CheckSUR.rar

BrianDrab · Jul 4, 2016

Thanks. Please re-run the System Update Readiness Tool so I can get a clean log as there were many fixes. Thanks.

oah · Jul 4, 2016

Done. File attached. View attachment CheckSUR.rar

BrianDrab · Jul 4, 2016

Wow, still a lot there. Since you say that you have obtained Windows 7 media I think you should try a repair install. No programs or data will be lost and it should fix your issues.

You can follow the instructions at the following link. Let me know how it goes or if you have any questions.
https://www.sysnative.com/forums/wi...-upgrade-install-windows-windows-7-vista.html

[SOLVED] another sfc/scannow cannot fix error

Active member

Active member

Attachments

Emeritus

Active member

Active member

Emeritus

Active member

Active member

Emeritus

Emeritus

Active member

Emeritus

Active member

Emeritus

Attachments

Active member

Emeritus

Attachments

Active member

Emeritus

Active member

Emeritus