[SOLVED] C: always dirty after reboot, Windows updates will fail

zcomputerwiz · Jul 20, 2015

Were you able to check the disk on another machine?

gerhard · Jul 27, 2015

put a different windows system disc in my computer and added my faulty windows disc as drice D:

During boot windows did an automatic chkdsk on drive D: and did some repair.
fsutil reported drive D: as clean.
did a chkdsk again on drive D:, this run was without any errors.
Both protocolls are attached.
After then made my drive D: again to drive C:, fsutil reported after reboot errors with file system

sfc will not run because of an incomplete windows update. During each boot system is trying to configure windows, but every time it fails with errors at a certain %. How to overcome this incomplete windows update?

sfc still reports some corruption in file system.

SFCFix version 2.4.5.0 by niemiro.
Start time: 2015-07-27 20:10:25.308
Microsoft Windows 7 Service Pack 1 - x86
Not using a script file.

AutoAnalysis::
SUMMARY: Some corruptions could not be fixed automatically. Seek advice from helper or sysnative.com.
CBS & SFC total detected corruption count: 0
CBS & SFC total unimportant corruption count: 0
CBS & SFC total fixed corruption count: 0
SURT total detected corruption count: 5
SURT total unimportant corruption count: 0
SURT total fixed corruption count: 0
AutoAnalysis:: directive completed successfully.

Successfully processed all directives.
SFCFix version 2.4.5.0 by niemiro has completed.
Currently storing 9 datablocks.
Finish time: 2015-07-27 20:12:18.079
----------------------EOF-----------------------

kind regards

Gerhard

zcomputerwiz · Jul 27, 2015

This result shows some bad sectors, I'd like to see what the SMART stats for the drive say.

Run Speccy again and publish the snapshot by following the instructions here: https://www.piriform.com/docs/speccy...ile-to-the-web
Include the link to your snapshot with your reply.

gerhard · Jul 27, 2015

http://speccy.piriform.com/results/oOFC2MFIgg0ARX7wYL3wJox

zcomputerwiz · Jul 27, 2015

Please run the System Update Readiness Tool again and attach C:\Windows\Logs\CBS\CheckSUR.log

gerhard · Jul 29, 2015

see attached log files

zcomputerwiz · Jul 29, 2015

That log looks good.

SFC Scan

Click on the Start

button and in the search box, type Command Prompt
When you see Command Prompt on the list, right-click on it and select Run as administrator
When command prompt opens, copy and paste the following commands into it, press enter after each

sfc /scannow

Wait for this to finish before you continue

CBS Log Collection

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

[sfcfixdownload]Download SFCFix[/sfcfixdownload] (by niemiro) and save this to your Desktop.
Download the attached file, SFCFixScript.txt, and save this to your Desktop. Ensure that this file is named SFCFixScript.txt - do not rename it.
Save any open documents and close all open windows.
On your Desktop, you should see two files: SFCFix.exe and SFCFixScript.txt.
Drag the file SFCFixScript.txt onto the file SFCFix.exe and release it.
SFCFix will now process the script.
Upon completion, a log should be created on your Desktop: SFCFix.txt.
Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this into your next post for me to analyse please - put [CODE][/CODE] tags around the log to break up the text.

https://dl.dropboxusercontent.com/u...ts/~Generic/Collect/CBS/SFCFixScript.txt?dl=1

LogBot · Jul 30, 2015

Logfile submission from Gerhard

Logfile submission from Gerhard.

The logfiles are available at: https://www.sysnative.com/niemiro/fileDistribution/2015-07/6274.zip

gerhard · Jul 30, 2015

Re: Logfile submission from Gerhard

sfc /scannow reports that
" system repair is pending which requires a reboot when finished, reboot Windows and run sfc again"

This pending windows update will happen since at least one week and will always fail to configure during reboot.

Code:

SFCFix version 2.4.5.0 by niemiro.
Start time: 2015-07-30 20:37:14.784
Microsoft Windows 7 Service Pack 1 - x86
Using .txt script file at C:\Users\Gerhard\Desktop\SFCFixScript.txt [0]




Collect:: directive completed successfully.




Successfully processed all directives.
SFCFix version 2.4.5.0 by niemiro has completed.
Currently storing 9 datablocks.
Finish time: 2015-07-30 20:39:56.333
----------------------EOF-----------------------

zcomputerwiz · Jul 30, 2015

Can you open the following directory: C:\ProgramData\Microsoft\Diagnosis\ETLLogs\AutoLogger\

I'm seeing that the file or directory is corrupt or unreadable in the logs.

2015-07-29 19:04:07, Error CSI 00000005 (F) Logged @2015/7/29:17:04:06.994 : [ml:278{139},l:276{138}]"Applying ACL O:BAD(A;;GA;;;BA)(A;OICI;GA;;;SY)(A;OICI;GA;;;CO)G:SYS: to directory C:\ProgramData\Microsoft\Diagnosis\ETLLogs\AutoLogger"
[gle=0x80004005]
2015-07-29 19:04:07, Error CSI 00000006 (F) Logged @2015/7/29:17:04:07.029 : [ml:102{51},l:100{50}]"SetNamedSecurityInfo (DACL and SACL) failed (1392)"
[gle=0x80004005]
2015-07-29 19:04:07, Error CSI 00000007@2015/7/29:17:04:07.050 (F) CMIADAPTER: Inner Error Message from AI HRESULT = HRESULT_FROM_WIN32(1392)
[[65]"Die Datei oder das Verzeichnis ist besch\u00e4digt und nicht lesbar."]

gerhard · Aug 2, 2015

No, can't open because of

"corrupt or unreadable"

kind regards

Gerhard

zcomputerwiz · Aug 2, 2015

Try renaming the ETLLogs folder to ETLLogs.old, then run SFC again and upload the logs.

LogBot · Aug 2, 2015

Logfile submission from Gerhard

Logfile submission from Gerhard.

The logfiles are available at: https://www.sysnative.com/niemiro/fileDistribution/2015-08/6310.zip

gerhard · Aug 2, 2015

Re: Logfile submission from Gerhard

SFCFix version 2.4.5.0 by niemiro.
Start time: 2015-08-02 22:23:37.090
Microsoft Windows 7 Service Pack 1 - x86
Using .txt script file at C:\Users\Gerhard\Desktop\SFCFixScript.txt [0]

Collect:: directive completed successfully.

Successfully processed all directives.
SFCFix version 2.4.5.0 by niemiro has completed.
Currently storing 9 datablocks.
Finish time: 2015-08-02 22:26:27.710
----------------------EOF-----------------------

zcomputerwiz · Aug 2, 2015

It doesn't appear that SFC completed. Go ahead and try it again, be sure to wait until it either says that Windows was unable to repair corruption or that it did not find any corrupt files.

SFC Scan

Click on the Start

button and in the search box, type Command Prompt
When you see Command Prompt on the list, right-click on it and select Run as administrator
When command prompt opens, copy and paste the following commands into it, press enter after each

sfc /scannow

Wait for this to finish before you continue

copy %windir%\logs\cbs\cbs.log %userprofile%\Desktop\cbs.txt
This will create a file, cbs.txt on your Desktop. Please attach this to your next post.

Note: If the file is too large to attach, please right-click cbs.txt, point to Send to, and then click Compressed (zipped) folder and upload the cbs.zip file instead.

gerhard · Aug 3, 2015

after renaming "C:\ProgramData\Microsoft\Diagnosis\ETLLogs" the first of the pending windows updates has been installed successfully. The next three pending windows updates still failed.
CBS.txt is attached

kind regards

Gerhard

zcomputerwiz · Aug 3, 2015

SFC made a lot of repairs. Go ahead and restart, then run it again and attach the log.

SFC Scan

Click on the Start

button and in the search box, type Command Prompt
When you see Command Prompt on the list, right-click on it and select Run as administrator
When command prompt opens, copy and paste the following commands into it, press enter after each

sfc /scannow

Wait for this to finish before you continue

copy %windir%\logs\cbs\cbs.log %userprofile%\Desktop\cbs.txt
This will create a file, cbs.txt on your Desktop. Please attach this to your next post.

Note: If the file is too large to attach, please right-click cbs.txt, point to Send to, and then click Compressed (zipped) folder and upload the cbs.zip file instead.

gerhard · Aug 3, 2015

again some repair has been done.

should I do this until no repair will happen anymore?

kind regards

Gerhard

zcomputerwiz · Aug 3, 2015

Reboot and run it again, be sure to attach the log :)

gerhard · Aug 4, 2015

CBS.txt is attached

[SOLVED] C: always dirty after reboot, Windows updates will fail

Windows Update Expert

Well-known member

Attachments

Windows Update Expert

Well-known member

Windows Update Expert

Well-known member

Attachments

Windows Update Expert

Well-known member

Well-known member

Windows Update Expert

Well-known member

Windows Update Expert

Well-known member

Well-known member

Windows Update Expert

Well-known member

Attachments

Windows Update Expert

Well-known member

Attachments

Windows Update Expert

Well-known member

Attachments