P PC Cheah Well-known member Joined Jan 3, 2017 Posts 45 Location Kuala Lumpur, Malaysia Jan 25, 2017 #41 Yes, I also ticked the HDAudbus.sys
xilolee Moderator Staff member Joined Dec 31, 2013 Posts 3,670 Location World, Europe, Italy Jan 25, 2017 #42 Is that still enabled? No problems after about 45 hours?
P PC Cheah Well-known member Joined Jan 3, 2017 Posts 45 Location Kuala Lumpur, Malaysia Jan 25, 2017 #43 The verifier is still running No problem
xilolee Moderator Staff member Joined Dec 31, 2013 Posts 3,670 Location World, Europe, Italy Jan 25, 2017 #44 :thud: Re-try with these verifier custom settings: all standard flags (you can click the flag type column to sort the flags) these additional flags: Power framework delay fuzzing. DDI compliance checking (additional) NDIS/WIFI verification Kernel synchronization delay fuzzing Code integrity checks automatically select all drivers installed To reset verifier settings in case something goes wrong, reboot to safe mode and type verifier /reset from an elevated command prompt. Remember the precautions: system restore point, system image, windows cd at hand... In case the safe boot from the machine won't start.
:thud: Re-try with these verifier custom settings: all standard flags (you can click the flag type column to sort the flags) these additional flags: Power framework delay fuzzing. DDI compliance checking (additional) NDIS/WIFI verification Kernel synchronization delay fuzzing Code integrity checks automatically select all drivers installed To reset verifier settings in case something goes wrong, reboot to safe mode and type verifier /reset from an elevated command prompt. Remember the precautions: system restore point, system image, windows cd at hand... In case the safe boot from the machine won't start.
P PC Cheah Well-known member Joined Jan 3, 2017 Posts 45 Location Kuala Lumpur, Malaysia Jan 25, 2017 #45 Finally an instant BSOD loop after booting. Here's the dump file Read More: https://yesmy-my.sharepoint.com/per...b0c202de222d3&authkey=AQhCHRqBBRcIsGDKTFHakGM
Finally an instant BSOD loop after booting. Here's the dump file Read More: https://yesmy-my.sharepoint.com/per...b0c202de222d3&authkey=AQhCHRqBBRcIsGDKTFHakGM
xilolee Moderator Staff member Joined Dec 31, 2013 Posts 3,670 Location World, Europe, Italy Jan 26, 2017 #46 It seems it's part of MSI GAMING app. Is it installed? Try to uninstall it.
P PC Cheah Well-known member Joined Jan 3, 2017 Posts 45 Location Kuala Lumpur, Malaysia Jan 26, 2017 #47 I still get the Verifier Detectd Violation BSOD after uninstalling it. Another dump file Read More: https://yesmy-my.sharepoint.com/per...cf9684e83a7c6&authkey=ATfdVsUvcSm8Us9_Ok5lG-0
I still get the Verifier Detectd Violation BSOD after uninstalling it. Another dump file Read More: https://yesmy-my.sharepoint.com/per...cf9684e83a7c6&authkey=ATfdVsUvcSm8Us9_Ok5lG-0
xilolee Moderator Staff member Joined Dec 31, 2013 Posts 3,670 Location World, Europe, Italy Jan 26, 2017 #48 Try to disable verifier and see if the problem has gone away. Fingers crossed
P PC Cheah Well-known member Joined Jan 3, 2017 Posts 45 Location Kuala Lumpur, Malaysia Jan 26, 2017 #49 forgot to mention, I ran another Verifier and still get a bsod after uninstalling the gaming app. Just wondering which driver causes the verifier to force a bsod.
forgot to mention, I ran another Verifier and still get a bsod after uninstalling the gaming app. Just wondering which driver causes the verifier to force a bsod.
xilolee Moderator Staff member Joined Dec 31, 2013 Posts 3,670 Location World, Europe, Italy Jan 27, 2017 #50 I saw the latest bsod, but it points to a MS driver. If the problem hasn't gone away (with verifier disabled), I'd run another verifier session: this time enable all verifier checks and select all drivers but Microsoft ones.
I saw the latest bsod, but it points to a MS driver. If the problem hasn't gone away (with verifier disabled), I'd run another verifier session: this time enable all verifier checks and select all drivers but Microsoft ones.
P PC Cheah Well-known member Joined Jan 3, 2017 Posts 45 Location Kuala Lumpur, Malaysia Jan 30, 2017 #51 Enable all verifier checks and all driver but Microsoft... reboot...bsod... another dump file: Read More: https://yesmy-my.sharepoint.com/per...cebb653f3de84&authkey=AddRngumTdYcL1vuU-29Gr4
Enable all verifier checks and all driver but Microsoft... reboot...bsod... another dump file: Read More: https://yesmy-my.sharepoint.com/per...cebb653f3de84&authkey=AddRngumTdYcL1vuU-29Gr4
xilolee Moderator Staff member Joined Dec 31, 2013 Posts 3,670 Location World, Europe, Italy Jan 30, 2017 #52 Uhm... When I told you to set bios default settings, I forgot you have to "underclock" your RAM speed... What setting has been selected by your MB (for your RAM frequency)? Your CPU specs "say" you should set it to DDR4-1866 or DDR4-2133.
Uhm... When I told you to set bios default settings, I forgot you have to "underclock" your RAM speed... What setting has been selected by your MB (for your RAM frequency)? Your CPU specs "say" you should set it to DDR4-1866 or DDR4-2133.
P PC Cheah Well-known member Joined Jan 3, 2017 Posts 45 Location Kuala Lumpur, Malaysia Jan 30, 2017 #53 The RAM I have has a XMP profile (I have enabled XMP), but the motherboard setting is set to 2133Mhz, while RAM in the Task manager shows 2400Mhz...
The RAM I have has a XMP profile (I have enabled XMP), but the motherboard setting is set to 2133Mhz, while RAM in the Task manager shows 2400Mhz...
xilolee Moderator Staff member Joined Dec 31, 2013 Posts 3,670 Location World, Europe, Italy Jan 30, 2017 #54 Try to turn off the xmp profile, then see what settings will be set (in your MB and in task manager). Last edited: Jan 30, 2017
Try to turn off the xmp profile, then see what settings will be set (in your MB and in task manager).
P PC Cheah Well-known member Joined Jan 3, 2017 Posts 45 Location Kuala Lumpur, Malaysia Jan 30, 2017 #55 After I disabled the XMP all the settings are set to AUTO. The speed in task manager show 2400MHZ BUT CPU-Z SHOWS 2133Mhz...
After I disabled the XMP all the settings are set to AUTO. The speed in task manager show 2400MHZ BUT CPU-Z SHOWS 2133Mhz...
xilolee Moderator Staff member Joined Dec 31, 2013 Posts 3,670 Location World, Europe, Italy Jan 30, 2017 #56 Ok... Issue still present?
P PC Cheah Well-known member Joined Jan 3, 2017 Posts 45 Location Kuala Lumpur, Malaysia Jan 30, 2017 #57 I think so.... Read More: _________________________________________________________________________________________________________CONCLUSION _________________________________________________________________________________________________________ Your system appears to be having trouble handling real-time audio and other tasks. You are likely to experience buffer underruns appearing as drop outs, clicks or pops. One or more DPC routines that belong to a driver running in your system appear to be executing for too long. Also one or more ISR routines that belong to a driver running in your system appear to be executing for too long. At least one detected problem appears to be network related. In case you are using a WLAN adapter, try disabling it to get better results. One problem may be related to power management, disable CPU throttling settings in Control Panel and BIOS setup. Check for BIOS updates. LatencyMon has been analyzing your system for 0:06:14 (h:mm:ss) on all processors. _________________________________________________________________________________________________________ SYSTEM INFORMATION _________________________________________________________________________________________________________ Computer name: PC_CHEAH-DPC OS version: Windows 10 , 10.0, build: 14393 (x64) Hardware: ASUSTeK COMPUTER INC., H170 PRO GAMING CPU: GenuineIntel Intel(R) Core(TM) i5-6500 CPU @ 3.20GHz Logical processors: 4 Processor groups: 1 RAM: 8132 MB total _________________________________________________________________________________________________________ CPU SPEED _________________________________________________________________________________________________________ Reported CPU speed: 3192 MHz Measured CPU speed: 1 MHz (approx.) Note: reported execution times may be calculated based on a fixed reported CPU speed. Disable variable speed settings like Intel Speed Step and AMD Cool N Quiet in the BIOS setup for more accurate results. WARNING: the CPU speed that was measured is only a fraction of the CPU speed reported. Your CPUs may be throttled back due to variable speed settings and thermal issues. It is suggested that you run a utility which reports your actual CPU frequency and temperature. _________________________________________________________________________________________________________ MEASURED INTERRUPT TO USER PROCESS LATENCIES _________________________________________________________________________________________________________ The interrupt to process latency reflects the measured interval that a usermode process needed to respond to a hardware request from the moment the interrupt service routine started execution. This includes the scheduling and execution of a DPC routine, the signaling of an event and the waking up of a usermode thread from an idle wait state in response to that event. Highest measured interrupt to process latency (µs): 2966.779322 Average measured interrupt to process latency (µs): 5.009232 Highest measured interrupt to DPC latency (µs): 2879.521106 Average measured interrupt to DPC latency (µs): 1.669164 _________________________________________________________________________________________________________ REPORTED ISRs _________________________________________________________________________________________________________ Interrupt service routines are routines installed by the OS and device drivers that execute in response to a hardware interrupt signal. Highest ISR routine execution time (µs): 2872.934524 Driver with highest ISR routine execution time: HDAudBus.sys - High Definition Audio Bus Driver, Microsoft Corporation Highest reported total ISR routine time (%): 0.23740 Driver with highest ISR total time: dxgkrnl.sys - DirectX Graphics Kernel, Microsoft Corporation Total time spent in ISRs (%) 0.301715 ISR count (execution time <250 µs): 291223 ISR count (execution time 250-500 µs): 0 ISR count (execution time 500-999 µs): 0 ISR count (execution time 1000-1999 µs): 0 ISR count (execution time 2000-3999 µs): 2 ISR count (execution time >=4000 µs): 0 _________________________________________________________________________________________________________ REPORTED DPCs _________________________________________________________________________________________________________ DPC routines are part of the interrupt servicing dispatch mechanism and disable the possibility for a process to utilize the CPU while it is interrupted until the DPC has finished execution. Highest DPC routine execution time (µs): 2806.867481 Driver with highest DPC routine execution time: ndis.sys - Network Driver Interface Specification (NDIS), Microsoft Corporation Highest reported total DPC routine time (%): 0.094138 Driver with highest DPC total execution time: dxgkrnl.sys - DirectX Graphics Kernel, Microsoft Corporation Total time spent in DPCs (%) 0.478679 DPC count (execution time <250 µs): 1899907 DPC count (execution time 250-500 µs): 0 DPC count (execution time 500-999 µs): 5 DPC count (execution time 1000-1999 µs): 0 DPC count (execution time 2000-3999 µs): 3 DPC count (execution time >=4000 µs): 0 _________________________________________________________________________________________________________ REPORTED HARD PAGEFAULTS _________________________________________________________________________________________________________ Hard pagefaults are events that get triggered by making use of virtual memory that is not resident in RAM but backed by a memory mapped file on disk. The process of resolving the hard pagefault requires reading in the memory from disk while the process is interrupted and blocked from execution. NOTE: some processes were hit by hard pagefaults. If these were programs producing audio, they are likely to interrupt the audio stream resulting in dropouts, clicks and pops. Check the Processes tab to see which programs were hit. Process with highest pagefault count: chrome.exe Total number of hard pagefaults 2082 Hard pagefault count of hardest hit process: 407 Highest hard pagefault resolution time (µs): 156356.070802 Total time spent in hard pagefaults (%): 0.324641 Number of processes hit: 30 _________________________________________________________________________________________________________ PER CPU DATA _________________________________________________________________________________________________________ CPU 0 Interrupt cycle time (s): 20.785606 CPU 0 ISR highest execution time (µs): 2872.934524 CPU 0 ISR total execution time (s): 4.482731 CPU 0 ISR count: 286170 CPU 0 DPC highest execution time (µs): 2806.867481 CPU 0 DPC total execution time (s): 5.554932 CPU 0 DPC count: 1668186 _________________________________________________________________________________________________________ CPU 1 Interrupt cycle time (s): 11.714087 CPU 1 ISR highest execution time (µs): 185.112469 CPU 1 ISR total execution time (s): 0.031284 CPU 1 ISR count: 5047 CPU 1 DPC highest execution time (µs): 290.171679 CPU 1 DPC total execution time (s): 0.745798 CPU 1 DPC count: 135042 _________________________________________________________________________________________________________ CPU 2 Interrupt cycle time (s): 10.488382 CPU 2 ISR highest execution time (µs): 3.068296 CPU 2 ISR total execution time (s): 0.000016 CPU 2 ISR count: 8 CPU 2 DPC highest execution time (µs): 253.263784 CPU 2 DPC total execution time (s): 0.470571 CPU 2 DPC count: 51683 _________________________________________________________________________________________________________ CPU 3 Interrupt cycle time (s): 9.409942 CPU 3 ISR highest execution time (µs): 0.0 CPU 3 ISR total execution time (s): 0.0 CPU 3 ISR count: 0 CPU 3 DPC highest execution time (µs): 242.678258 CPU 3 DPC total execution time (s): 0.390324 CPU 3 DPC count: 45004 _________________________________________________________________________________________________________
I think so.... Read More: _________________________________________________________________________________________________________CONCLUSION _________________________________________________________________________________________________________ Your system appears to be having trouble handling real-time audio and other tasks. You are likely to experience buffer underruns appearing as drop outs, clicks or pops. One or more DPC routines that belong to a driver running in your system appear to be executing for too long. Also one or more ISR routines that belong to a driver running in your system appear to be executing for too long. At least one detected problem appears to be network related. In case you are using a WLAN adapter, try disabling it to get better results. One problem may be related to power management, disable CPU throttling settings in Control Panel and BIOS setup. Check for BIOS updates. LatencyMon has been analyzing your system for 0:06:14 (h:mm:ss) on all processors. _________________________________________________________________________________________________________ SYSTEM INFORMATION _________________________________________________________________________________________________________ Computer name: PC_CHEAH-DPC OS version: Windows 10 , 10.0, build: 14393 (x64) Hardware: ASUSTeK COMPUTER INC., H170 PRO GAMING CPU: GenuineIntel Intel(R) Core(TM) i5-6500 CPU @ 3.20GHz Logical processors: 4 Processor groups: 1 RAM: 8132 MB total _________________________________________________________________________________________________________ CPU SPEED _________________________________________________________________________________________________________ Reported CPU speed: 3192 MHz Measured CPU speed: 1 MHz (approx.) Note: reported execution times may be calculated based on a fixed reported CPU speed. Disable variable speed settings like Intel Speed Step and AMD Cool N Quiet in the BIOS setup for more accurate results. WARNING: the CPU speed that was measured is only a fraction of the CPU speed reported. Your CPUs may be throttled back due to variable speed settings and thermal issues. It is suggested that you run a utility which reports your actual CPU frequency and temperature. _________________________________________________________________________________________________________ MEASURED INTERRUPT TO USER PROCESS LATENCIES _________________________________________________________________________________________________________ The interrupt to process latency reflects the measured interval that a usermode process needed to respond to a hardware request from the moment the interrupt service routine started execution. This includes the scheduling and execution of a DPC routine, the signaling of an event and the waking up of a usermode thread from an idle wait state in response to that event. Highest measured interrupt to process latency (µs): 2966.779322 Average measured interrupt to process latency (µs): 5.009232 Highest measured interrupt to DPC latency (µs): 2879.521106 Average measured interrupt to DPC latency (µs): 1.669164 _________________________________________________________________________________________________________ REPORTED ISRs _________________________________________________________________________________________________________ Interrupt service routines are routines installed by the OS and device drivers that execute in response to a hardware interrupt signal. Highest ISR routine execution time (µs): 2872.934524 Driver with highest ISR routine execution time: HDAudBus.sys - High Definition Audio Bus Driver, Microsoft Corporation Highest reported total ISR routine time (%): 0.23740 Driver with highest ISR total time: dxgkrnl.sys - DirectX Graphics Kernel, Microsoft Corporation Total time spent in ISRs (%) 0.301715 ISR count (execution time <250 µs): 291223 ISR count (execution time 250-500 µs): 0 ISR count (execution time 500-999 µs): 0 ISR count (execution time 1000-1999 µs): 0 ISR count (execution time 2000-3999 µs): 2 ISR count (execution time >=4000 µs): 0 _________________________________________________________________________________________________________ REPORTED DPCs _________________________________________________________________________________________________________ DPC routines are part of the interrupt servicing dispatch mechanism and disable the possibility for a process to utilize the CPU while it is interrupted until the DPC has finished execution. Highest DPC routine execution time (µs): 2806.867481 Driver with highest DPC routine execution time: ndis.sys - Network Driver Interface Specification (NDIS), Microsoft Corporation Highest reported total DPC routine time (%): 0.094138 Driver with highest DPC total execution time: dxgkrnl.sys - DirectX Graphics Kernel, Microsoft Corporation Total time spent in DPCs (%) 0.478679 DPC count (execution time <250 µs): 1899907 DPC count (execution time 250-500 µs): 0 DPC count (execution time 500-999 µs): 5 DPC count (execution time 1000-1999 µs): 0 DPC count (execution time 2000-3999 µs): 3 DPC count (execution time >=4000 µs): 0 _________________________________________________________________________________________________________ REPORTED HARD PAGEFAULTS _________________________________________________________________________________________________________ Hard pagefaults are events that get triggered by making use of virtual memory that is not resident in RAM but backed by a memory mapped file on disk. The process of resolving the hard pagefault requires reading in the memory from disk while the process is interrupted and blocked from execution. NOTE: some processes were hit by hard pagefaults. If these were programs producing audio, they are likely to interrupt the audio stream resulting in dropouts, clicks and pops. Check the Processes tab to see which programs were hit. Process with highest pagefault count: chrome.exe Total number of hard pagefaults 2082 Hard pagefault count of hardest hit process: 407 Highest hard pagefault resolution time (µs): 156356.070802 Total time spent in hard pagefaults (%): 0.324641 Number of processes hit: 30 _________________________________________________________________________________________________________ PER CPU DATA _________________________________________________________________________________________________________ CPU 0 Interrupt cycle time (s): 20.785606 CPU 0 ISR highest execution time (µs): 2872.934524 CPU 0 ISR total execution time (s): 4.482731 CPU 0 ISR count: 286170 CPU 0 DPC highest execution time (µs): 2806.867481 CPU 0 DPC total execution time (s): 5.554932 CPU 0 DPC count: 1668186 _________________________________________________________________________________________________________ CPU 1 Interrupt cycle time (s): 11.714087 CPU 1 ISR highest execution time (µs): 185.112469 CPU 1 ISR total execution time (s): 0.031284 CPU 1 ISR count: 5047 CPU 1 DPC highest execution time (µs): 290.171679 CPU 1 DPC total execution time (s): 0.745798 CPU 1 DPC count: 135042 _________________________________________________________________________________________________________ CPU 2 Interrupt cycle time (s): 10.488382 CPU 2 ISR highest execution time (µs): 3.068296 CPU 2 ISR total execution time (s): 0.000016 CPU 2 ISR count: 8 CPU 2 DPC highest execution time (µs): 253.263784 CPU 2 DPC total execution time (s): 0.470571 CPU 2 DPC count: 51683 _________________________________________________________________________________________________________ CPU 3 Interrupt cycle time (s): 9.409942 CPU 3 ISR highest execution time (µs): 0.0 CPU 3 ISR total execution time (s): 0.0 CPU 3 ISR count: 0 CPU 3 DPC highest execution time (µs): 242.678258 CPU 3 DPC total execution time (s): 0.390324 CPU 3 DPC count: 45004 _________________________________________________________________________________________________________
xilolee Moderator Staff member Joined Dec 31, 2013 Posts 3,670 Location World, Europe, Italy Jan 30, 2017 #58 Did you reset verifier settings? Try to disable intel speedstep and to enable spread spectrum (in your BIOS).
Did you reset verifier settings? Try to disable intel speedstep and to enable spread spectrum (in your BIOS).
P PC Cheah Well-known member Joined Jan 3, 2017 Posts 45 Location Kuala Lumpur, Malaysia Jan 30, 2017 #59 still the same. I dont think disabling the speedstep help and I think it eats more power.
xilolee Moderator Staff member Joined Dec 31, 2013 Posts 3,670 Location World, Europe, Italy Feb 5, 2017 #60 Are you using the red usb port near the vga port (rear panel)? Or the blue usb ports under the rj45 port? And what things are you connecting to them? Try to download/install the Netw. Adap. Driver for W8.1 (x86/x64) (product webpage) --> PROWinx64.exe (download webpage) Last edited: Feb 5, 2017
Are you using the red usb port near the vga port (rear panel)? Or the blue usb ports under the rj45 port? And what things are you connecting to them? Try to download/install the Netw. Adap. Driver for W8.1 (x86/x64) (product webpage) --> PROWinx64.exe (download webpage)