Page 2 of 2 First 12
  1. #21

    Re: [7SP1 x64] High DPC Latency

    I'm still have DPC Latency, apparently the latency decreases. I ran LatencyMon again:
    [7SP1 x64] High DPC Latency-capturar4-png
    [7SP1 x64] High DPC Latency-capturar5-png


    • Ad Bot

      advertising
      Beep.

        
       

  2. #22

    Re: [7SP1 x64] High DPC Latency

    I'm still having DPC Latency problems, but it seems that the latency problem decreases, I ran LatencyMon again:

    [7SP1 x64] High DPC Latency-capturar4-png[7SP1 x64] High DPC Latency-capturar5-png

  3. #23
    xilolee's Avatar
    Join Date
    Dec 2013
    Location
    World, Europe, Italy
    Posts
    2,057
    • specs System Specs
      • Manufacturer:
        XILOLEE.com
      • Model Number:
        XILO
      • Motherboard:
        ASROCK FM2A88M Pro3+ chipset A88X Bolton-D4
      • CPU:
        A10-7800, 4 CPU, 4 thr, 65/45W, FM2+, 28nm, Steamroller/Kaveri
      • Memory:
        10GB (Nanya and kingston ddr3-1333 9-9-9-24)
      • Graphics:
        Radeon R7 720MHz (8 GPU cores, integrated in CPU)
      • Sound Card:
        RealTek ALC662 (integrated in MB)
      • Hard Drives:
        Seagate ST500DM002-1BD142 500GB 7200RPM
      • Power Supply:
        SuperFlower 450W 80+ Platinum (SF-450P14PE)
      • Case:
        Sharkoon VG4-S
      • Cooling:
        Realtek RTL8111GR (NIC integrated in MB)
      • Display:
        Samsung SyncMaster SA100 LS22A100NS-EN
      • Operating System:
        Windows 10 Home/Standard x64

    Re: [7SP1 x64] High DPC Latency

    Did you disable also MBAM in the clean boot?
    Try to remove all ata channels (device manager, ide ata/atapi controllers), i.e. leave only the standard ahci 1.0 serial ata controller.
    Disable EIST and HPET in your bios settings.
    Is the ram stick seated in the second slot (starting from cpu)?
    Last edited by xilolee; 01-17-2018 at 04:54 PM.

  4. #24

    Re: [7SP1 x64] High DPC Latency

    Quote Originally Posted by xilolee View Post
    Did you disable also MBAM in the clean boot?
    Try to remove all ata channels (device manager, ide ata/atapi controllers), i.e. leave only the standard ahci 1.0 serial ata controller.
    Disable EIST and HPET in your bios settings.
    Is the ram stick seated in the second slot (starting from cpu)?
    Did you disable also MBAM in the clean boot? Is MBAM Malwarebytes? If it is, yes!
    Try to remove all ata channels: I tried, but every time I reboot my PC comes back again, even when I disable the automatic driver install, so I just disable and left the second channel on cuz it's only possible to remove (and will ask to reboot).
    Is the ram stick seated in the second slot (starting from cpu)? It shows in my BIOS that my RAM is in the 4 slot.
    Disable EIST and HPET in your bios settings. Done!

  5. #25
    xilolee's Avatar
    Join Date
    Dec 2013
    Location
    World, Europe, Italy
    Posts
    2,057
    • specs System Specs
      • Manufacturer:
        XILOLEE.com
      • Model Number:
        XILO
      • Motherboard:
        ASROCK FM2A88M Pro3+ chipset A88X Bolton-D4
      • CPU:
        A10-7800, 4 CPU, 4 thr, 65/45W, FM2+, 28nm, Steamroller/Kaveri
      • Memory:
        10GB (Nanya and kingston ddr3-1333 9-9-9-24)
      • Graphics:
        Radeon R7 720MHz (8 GPU cores, integrated in CPU)
      • Sound Card:
        RealTek ALC662 (integrated in MB)
      • Hard Drives:
        Seagate ST500DM002-1BD142 500GB 7200RPM
      • Power Supply:
        SuperFlower 450W 80+ Platinum (SF-450P14PE)
      • Case:
        Sharkoon VG4-S
      • Cooling:
        Realtek RTL8111GR (NIC integrated in MB)
      • Display:
        Samsung SyncMaster SA100 LS22A100NS-EN
      • Operating System:
        Windows 10 Home/Standard x64

    Re: [7SP1 x64] High DPC Latency

    Yup, mbam stands for malwarebytes antimalware (it was its name up to version 2).
    Then try to move the ram stick from slot 4 to slot 2 (starting from cpu).

  6. #26

    Re: [7SP1 x64] High DPC Latency

    Quote Originally Posted by xilolee View Post
    Yup, mbam stands for malwarebytes antimalware (it was its name up to version 2).
    Then try to move the ram stick from slot 4 to slot 2 (starting from cpu).
    Then try to move the ram stick from slot 4 to slot 2: Done.
    Nope, the problem still persists.

    [7SP1 x64] High DPC Latency-capturar6-png[7SP1 x64] High DPC Latency-capturar7-png

  7. #27
    xilolee's Avatar
    Join Date
    Dec 2013
    Location
    World, Europe, Italy
    Posts
    2,057
    • specs System Specs
      • Manufacturer:
        XILOLEE.com
      • Model Number:
        XILO
      • Motherboard:
        ASROCK FM2A88M Pro3+ chipset A88X Bolton-D4
      • CPU:
        A10-7800, 4 CPU, 4 thr, 65/45W, FM2+, 28nm, Steamroller/Kaveri
      • Memory:
        10GB (Nanya and kingston ddr3-1333 9-9-9-24)
      • Graphics:
        Radeon R7 720MHz (8 GPU cores, integrated in CPU)
      • Sound Card:
        RealTek ALC662 (integrated in MB)
      • Hard Drives:
        Seagate ST500DM002-1BD142 500GB 7200RPM
      • Power Supply:
        SuperFlower 450W 80+ Platinum (SF-450P14PE)
      • Case:
        Sharkoon VG4-S
      • Cooling:
        Realtek RTL8111GR (NIC integrated in MB)
      • Display:
        Samsung SyncMaster SA100 LS22A100NS-EN
      • Operating System:
        Windows 10 Home/Standard x64

    Re: [7SP1 x64] High DPC Latency

    What's the problem, exactly?
    You didn't write it (only high latency, seen in latencymon. I didn't read any other problems).

  8. #28

    Re: [7SP1 x64] High DPC Latency

    When I play some videos especially in 1080 60fps, and games like cs go, gta v. I'm having some freezing, stuttering latency.

  9. #29
    xilolee's Avatar
    Join Date
    Dec 2013
    Location
    World, Europe, Italy
    Posts
    2,057
    • specs System Specs
      • Manufacturer:
        XILOLEE.com
      • Model Number:
        XILO
      • Motherboard:
        ASROCK FM2A88M Pro3+ chipset A88X Bolton-D4
      • CPU:
        A10-7800, 4 CPU, 4 thr, 65/45W, FM2+, 28nm, Steamroller/Kaveri
      • Memory:
        10GB (Nanya and kingston ddr3-1333 9-9-9-24)
      • Graphics:
        Radeon R7 720MHz (8 GPU cores, integrated in CPU)
      • Sound Card:
        RealTek ALC662 (integrated in MB)
      • Hard Drives:
        Seagate ST500DM002-1BD142 500GB 7200RPM
      • Power Supply:
        SuperFlower 450W 80+ Platinum (SF-450P14PE)
      • Case:
        Sharkoon VG4-S
      • Cooling:
        Realtek RTL8111GR (NIC integrated in MB)
      • Display:
        Samsung SyncMaster SA100 LS22A100NS-EN
      • Operating System:
        Windows 10 Home/Standard x64

    Re: [7SP1 x64] High DPC Latency

    Try to remove malwarebytes.

  10. #30

    Re: [7SP1 x64] High DPC Latency

    No, nothing changed.

  11. #31
    xilolee's Avatar
    Join Date
    Dec 2013
    Location
    World, Europe, Italy
    Posts
    2,057
    • specs System Specs
      • Manufacturer:
        XILOLEE.com
      • Model Number:
        XILO
      • Motherboard:
        ASROCK FM2A88M Pro3+ chipset A88X Bolton-D4
      • CPU:
        A10-7800, 4 CPU, 4 thr, 65/45W, FM2+, 28nm, Steamroller/Kaveri
      • Memory:
        10GB (Nanya and kingston ddr3-1333 9-9-9-24)
      • Graphics:
        Radeon R7 720MHz (8 GPU cores, integrated in CPU)
      • Sound Card:
        RealTek ALC662 (integrated in MB)
      • Hard Drives:
        Seagate ST500DM002-1BD142 500GB 7200RPM
      • Power Supply:
        SuperFlower 450W 80+ Platinum (SF-450P14PE)
      • Case:
        Sharkoon VG4-S
      • Cooling:
        Realtek RTL8111GR (NIC integrated in MB)
      • Display:
        Samsung SyncMaster SA100 LS22A100NS-EN
      • Operating System:
        Windows 10 Home/Standard x64

    Re: [7SP1 x64] High DPC Latency



    Please re-post all logs, given that we have changed something...

  12. #32

Page 2 of 2 First 12

Similar Threads

  1. Replies: 1
    Last Post: 01-14-2018, 12:30 PM
  2. Replies: 2
    Last Post: 09-02-2017, 10:53 PM
  3. High DPC Latency.
    By ganon11000 in forum Windows 7 | Windows Vista
    Replies: 7
    Last Post: 12-21-2015, 06:06 PM
  4. High DPC Latency
    By Shinobi_32 in forum Windows 7 | Windows Vista
    Replies: 5
    Last Post: 12-21-2015, 03:03 PM
  5. Very high DCP Latency
    By larurau in forum Windows 10
    Replies: 1
    Last Post: 09-03-2015, 03:19 PM

Log in

Log in