1. #1

    Win10 reboot loop - attempting to repair "forever" [moved from BSOD]

    I have a Win10 installation which cant boot up. It tries once, then reboots into "atempting to repair" and nothing happens from there.

    I have tried booting on a media creation tool usb stick, but when booting on this it ends up with a single option popup like this
    "you are trying to install on a windows that is trying to upgrade, will you continue to upgrade, remove usb and press yes, else press no to do a new clean install"
    Yes boots over, and I havent tried no since I wont do a clean reinstall.

    So I never ends in a menu where I can choose repair, safemode or anything like that.

    I have dual boot so can boot up in linux, and can acces the drive in linux with out any problems. I can even do a file check on the ssd with ntfsfix and it says its fine.

    I can also mount the 500mb recovery boot partition windows make.
    In that is a \Windows\Logs\RecEnv_Ramdisk\setupact.log

    And from the last "trying win10 boot" is a log:

    Code:
    2018-12-20 19:54:21, Info                         Starting enumeration of PnP devices. 
    2018-12-20 19:54:22, Info                         [recenv.exe] Enter WinReIsWimBootEnabled 
    2018-12-20 19:54:22, Info                         [recenv.exe] Parameters: pszWinDir: D:\WINDOWS 
    2018-12-20 19:54:22, Info                         [recenv.exe] RegGetValue failed. Error: 0x2. 
    2018-12-20 19:54:22, Info                         [recenv.exe] Exit WinReIsWimBootEnabled returns 0 with last error: 0x0 
    2018-12-20 19:54:22, Info                         [recenv.exe] Enter WinReGetConfig 
    2018-12-20 19:54:22, Info                         [recenv.exe] Parameters: configWinDir: NULL 
    2018-12-20 19:54:22, Info                         [recenv.exe] WinRE config file path: D:\WINDOWS\system32\Recovery\ReAgent.xml 
    2018-12-20 19:54:22, Info                         [recenv.exe] Update enhanced config info is enabled. 
    2018-12-20 19:54:22, Info                         [recenv.exe] ReAgentConfig::ReadBcdAndUpdateEnhancedConfigInfo (In WinPE) Using winre guid from the config file 
    2018-12-20 19:54:22, Info                         [recenv.exe] WinRE is installed 
    2018-12-20 19:54:22, Info                         [recenv.exe] WinRE is installed at: \\?\GLOBALROOT\device\harddisk0\partition3\Recovery\WindowsRE 
    2018-12-20 19:54:22, Info                         [recenv.exe] System is WimBoot: FALSE 
    2018-12-20 19:54:22, Info                         [recenv.exe] Exit WinReGetConfig return value: 1, last error: 0x0 
    2018-12-20 19:54:22, Info                         [recenv.exe] Enter WinReGetConfig 
    2018-12-20 19:54:22, Info                         [recenv.exe] Parameters: configWinDir: NULL 
    2018-12-20 19:54:22, Info                         [recenv.exe] WinRE config file path: D:\WINDOWS\system32\Recovery\ReAgent.xml 
    2018-12-20 19:54:22, Info                         [recenv.exe] Update enhanced config info is enabled. 
    2018-12-20 19:54:22, Info                         [recenv.exe] ReAgentConfig::ReadBcdAndUpdateEnhancedConfigInfo (In WinPE) Using winre guid from the config file 
    2018-12-20 19:54:22, Info                         [recenv.exe] WinRE is installed 
    2018-12-20 19:54:22, Info                         [recenv.exe] WinRE is installed at: \\?\GLOBALROOT\device\harddisk0\partition3\Recovery\WindowsRE 
    2018-12-20 19:54:22, Info                         [recenv.exe] System is WimBoot: FALSE 
    2018-12-20 19:54:22, Info                         [recenv.exe] Exit WinReGetConfig return value: 1, last error: 0x0 
    2018-12-20 19:54:22, Info                         Invalid launch type for OEM-Front-End, 0x4 
    2018-12-20 19:54:22, Info                         [recenv.exe] Enter WinReGetConfig 
    2018-12-20 19:54:22, Info                         [recenv.exe] Parameters: configWinDir: NULL 
    2018-12-20 19:54:22, Info                         [recenv.exe]  Using recovery file at \\?\GLOBALROOT\Device\HarddiskVolume3\RECOVERY\WINDOWSRE\ReAgent.xml 
    2018-12-20 19:54:22, Info                         [recenv.exe] WinRE config file path: \\?\GLOBALROOT\Device\HarddiskVolume3\RECOVERY\WINDOWSRE\ReAgent.xml 
    2018-12-20 19:54:22, Info                         [recenv.exe] Update enhanced config info is enabled. 
    2018-12-20 19:54:22, Info                         [recenv.exe] ReAgentConfig::ReadBcdAndUpdateEnhancedConfigInfo (In WinPE) Using winre guid from the config file 
    2018-12-20 19:54:22, Info                         [recenv.exe] WinRE is installed 
    2018-12-20 19:54:22, Info                         [recenv.exe] WinRE is installed at: \\?\GLOBALROOT\device\harddisk0\partition3\Recovery\WindowsRE 
    2018-12-20 19:54:22, Info                         [recenv.exe] System is WimBoot: FALSE 
    2018-12-20 19:54:22, Info                         [recenv.exe] Exit WinReGetConfig return value: 1, last error: 0x0 
    2018-12-20 19:54:22, Info                         Auto launch narrator not specified 
    2018-12-20 19:54:22, Info                         Custom boot app not specified 
    2018-12-20 19:54:22, Info                         [recenv.exe] Enter WinReGetConfig 
    2018-12-20 19:54:22, Info                         [recenv.exe] Parameters: configWinDir: NULL 
    2018-12-20 19:54:22, Info                         [recenv.exe]  Using recovery file at \\?\GLOBALROOT\Device\HarddiskVolume3\RECOVERY\WINDOWSRE\ReAgent.xml 
    2018-12-20 19:54:22, Info                         [recenv.exe] WinRE config file path: \\?\GLOBALROOT\Device\HarddiskVolume3\RECOVERY\WINDOWSRE\ReAgent.xml 
    2018-12-20 19:54:22, Info                         [recenv.exe] Update enhanced config info is enabled. 
    2018-12-20 19:54:22, Info                         [recenv.exe] ReAgentConfig::ReadBcdAndUpdateEnhancedConfigInfo (In WinPE) Using winre guid from the config file 
    2018-12-20 19:54:22, Info                         [recenv.exe] WinRE is installed 
    2018-12-20 19:54:22, Info                         [recenv.exe] WinRE is installed at: \\?\GLOBALROOT\device\harddisk0\partition3\Recovery\WindowsRE 
    2018-12-20 19:54:22, Info                         [recenv.exe] System is WimBoot: FALSE 
    2018-12-20 19:54:22, Info                         [recenv.exe] Exit WinReGetConfig return value: 1, last error: 0x0 
    2018-12-20 19:54:22, Info                         OS volume was not locked or couldn't be processed.  Defer unlocking remaining volumes. 0x00000000 
    2018-12-20 19:54:22, Info                         [recenv.exe] Enter WinReCreateLogInstanceEx 
    2018-12-20 19:54:22, Info                         [recenv.exe]  Using recovery file at \\?\GLOBALROOT\Device\HarddiskVolume3\RECOVERY\WINDOWSRE\ReAgent.xml 
    2018-12-20 19:54:22, Info                         [recenv.exe] Update enhanced config info is enabled. 
    2018-12-20 19:54:22, Info                         [recenv.exe] ReAgentConfig::ReadBcdAndUpdateEnhancedConfigInfo (In WinPE) Using winre guid from the config file 
    2018-12-20 19:54:22, Info                         [recenv.exe] WinRE is installed 
    2018-12-20 19:54:22, Info                         [recenv.exe] Exit WinReCreateLogInstanceEx returns error code 0x0 
    2018-12-20 19:54:22, Info                         [recenv.exe] Enter WinReGetConfig 
    2018-12-20 19:54:22, Info                         [recenv.exe] Parameters: configWinDir: NULL 
    2018-12-20 19:54:22, Info                         [recenv.exe]  Using recovery file at \\?\GLOBALROOT\Device\HarddiskVolume3\RECOVERY\WINDOWSRE\ReAgent.xml 
    2018-12-20 19:54:22, Info                         [recenv.exe] WinRE config file path: \\?\GLOBALROOT\Device\HarddiskVolume3\RECOVERY\WINDOWSRE\ReAgent.xml 
    2018-12-20 19:54:22, Info                         [recenv.exe] Update enhanced config info is enabled. 
    2018-12-20 19:54:22, Info                         [recenv.exe] ReAgentConfig::ReadBcdAndUpdateEnhancedConfigInfo (In WinPE) Using winre guid from the config file 
    2018-12-20 19:54:22, Info                         [recenv.exe] WinRE is installed 
    2018-12-20 19:54:22, Info                         [recenv.exe] WinRE is installed at: \\?\GLOBALROOT\device\harddisk0\partition3\Recovery\WindowsRE 
    2018-12-20 19:54:22, Info                         [recenv.exe] System is WimBoot: FALSE 
    2018-12-20 19:54:22, Info                         [recenv.exe] Exit WinReGetConfig return value: 1, last error: 0x0 
    2018-12-20 19:54:22, Info                         Offline scanning application not configured 
    2018-12-20 19:54:22, Error                        Invalid path specified 
    2018-12-20 19:54:22, Info                         Copying logs from [X:\windows\Logs\RecEnv] to [D:\WINDOWS\Logs\RecEnv_Ramdisk]



    is it helpful? or any other log?


    • Ad Bot

      advertising
      Beep.

        
       

  2. #2
    Corday's Avatar
    Join Date
    Sep 2017
    Location
    Midlands of South Carolina
    Posts
    52
    • specs System Specs
      • Manufacturer:
        Maingear
      • Model Number:
        Z370
      • Motherboard:
        GIGABYTE-GA-H81M-HD3 USB 3.0 & SATA 6G
      • CPU:
        intel-i5-4690K-3.5GHz/3.9GHz Turbo 6MB L3Cache HD4600
      • Memory:
        16.0GB Dual-Channel DDR3 @ 798MHz (10-10-10-27)
      • Graphics:
        Nvidia GeForce GTX 960 2GB with G-Sync
      • Sound Card:
        Nvidia GeForce GTX 960 2GB with G-Sync
      • Hard Drives:
        1TB + 2nd internal 1TB
      • Disk Drives:
        24X Dual Layer DVD RW Drive M-DISC by LG
      • Power Supply:
        CMPSU-430CX 430W Corsair Builder Series 80 Plus Certified PSU
      • Case:
        Compact Mid Tower VYBE
      • Cooling:
      • Display:
      • Operating System:
        Windows 10 Pro

    Re: Win10 reboot loop - attempting to repair "forever" [moved from BSOD]

    Since no one responded in four weeks, I'll ask how long you gave the Startup Repair to work? I've seen it take overnight+ depending on the amount of disc usage.

Similar Threads

  1. CHKDSK "Verbose" and "Repair" issue
    By maki in forum Windows 7 | Windows Vista
    Replies: 13
    Last Post: 12-25-2017, 02:21 PM
  2. Replies: 7
    Last Post: 04-20-2016, 07:25 AM
  3. [SOLVED] Windows 8.1 "Preparing Automatic Repair" boot loop
    By Saiber77 in forum Windows 8 | Windows RT
    Replies: 1
    Last Post: 07-24-2015, 05:16 PM
  4. BSOD on 8.1 - getting that "hash mismatch" for "Amd64\CNBJ2530.DPB" of prncacla.inf
    By anthracis in forum BSOD, Crashes, Kernel Debugging
    Replies: 8
    Last Post: 12-08-2013, 07:36 AM
  5. [SOLVED] bsod: "page fault in nonpaged area" and "driver IRQL not less or equal"
    By nlj223 in forum BSOD, Crashes, Kernel Debugging
    Replies: 10
    Last Post: 09-20-2012, 01:04 AM

Log in

Log in