Re: [W10StdV1703b15063 x64] DPC issues.
BIOS: speccy shows 3503 5/15/2017
MB support shows:
3504 2017/08/11
MB support also shows:
- 2017/11/22 MEUpdateTool
- 2017/11/01 11.7.0.1040 Management Engine Interface
Given that the imei driver precedes the meupdatetool, I think you should install that one for first.
Therefore:
1) bios
2) imei
3) meupdatetool
Install imei and meupdatetool after you disabled the antivirus and the network.
Or run them in safe mode (without networking).
Check the manual at point 2.11 for to know how to update the bios.
Then reboot once, shutdown, re-enter the bios and:
Ensure to load the BIOS default settings to ensure system compatibility and stability. Select the Load Optimized Defaults item under the Exit BIOS menu.
Try to move your 8GB sticks to 2nd and 4th slots and your 4GB sticks to 1st and 3rd slots.
Try to set
2133 as their speed.
Speccy shows
- 2x KHX2133C14D4/4G
- 2x KHX2133C14D4/8G
I found these models:
HX421C14FBK2/8 (8GB Kit 2x4GB DDR4 2133MHz CL14)
HX421C14FB2K2/16 (16GB Kit 2x8GB DDR4 2133MHz CL14)
Could you post the exact models?
There's a
new firmware for your Samsung ssd: ISO
EMT02B6Q (currently it is
EMT01B6Q, seen in speccy).
Open device manager, universal serial bus controllers, and try right-click -->
update driver on
ASMEDIA USB 3.1 items (probably "ASMedia USB3.1 eXtensible Host Controller").
It seems currently you're using
1.16.35.1, but I found
1.16.49.1 in
Microsoft update catalog!!!.