Windows Server 2016 Issue - Upgrade to 2019 Fails - DISM Error: Array Out of Bounds

[llbcjosh]

So, I stopped the last fix, since it had been running for a week, and started it again. It finished within a few hours after restarting it. I am including the file from that fix as well.

 

[PeterJ]

Okay. Looks good.

Restart the machine.
Try the upgrade again and report the result.
If it fails, copy the file C:\Windows\Logs\CBS\cbs.log to your desktop.
Zip the copied file and attach the zipped cbs.log to your next reply.

 

[llbcjosh]

The installation failed again, but with a different error this time. Should I run SFC and try it again?

 

[PeterJ]

Run the command Dism /Online /Cleanup-Image /RestoreHealth in an elevated commandprompt and report the result.
If it fails, copy the file C:\Windows\Logs\CBS\cbs.log to your desktop.
Zip the copied file and attach the zipped cbs.log to your next reply.

 

[llbcjosh]

Got to 99.7% and then failed with an "array bounds are invalid" error. That's much further than it has made it previously. I am including the DISM log as well, in case you wanna see it.

 

[PeterJ]

Step 1:
WARNING! The following fix is specific to the user's system in this thread only. No one else should follow these instructions, as it could damage your system.

• Download the attachment SFCFix.zip and save it on your desktop.
• Save any work you have open, and close all programs.
• Drag the SFCFix.zip file over the SFCFix.exe executable and release it.
  
  
• SFCFix will launch, let it complete.
• Once done, a file will appear on your desktop, called SFCFix.txt.
• Attach that file to your next reply.

Step 2:
Remove Update Manually

1. Right-Click the Start button and click Command Prompt (Admin) on the list.
2. When command prompt opens, copy and paste the following command into it, then press enter.
   wusa /uninstall /KB:4601392
   
3. Let me know if it says it was successful or if there are any errors.

 

[llbcjosh]

Looks like that update isn't installed on my system.

 

[PeterJ]

FRST Registry Search

1. Click the Start button and in the search box, type CMD
2. When you see cmd.exe on the list, right-click on it and select Run as administrator.
3. When command prompt opens, copy and paste the following command into it, press enter afterwards.
   
   

   REG LOAD HKLM\COMPONENTS C:\Windows\System32\config\COMPONENTS

   
   Note: This loads your components hive which is what we want. Please keep the command prompt window open while you perform the remaining steps. You can minimize it if you wish but keep it open.
4. Download the Farbar Recovery Scan Tool and save it to your Desktop:
   64-bit: Downloading Farbar Recovery Scan Tool
   Note: Your antivirus program may report FRST incorrectly as an infection. If so, disable the real-time protection when downloading and running FRST.
5. Right-click on the file FRST64.exe and choose Run as administrator.
6. Copy and paste KB4601392 into the Search box and click the Search Registry button.
7. When the scan is complete, a message will display that 'SearchReg.txt' is saved in the same folder FRST was started from. Notepad will open this file also. Close Notepad and attach the file 'SearchReg.txt' to your next reply.
8. You may close any remaining open windows now.

 

[llbcjosh]

Done.

 

[PeterJ]

Step 1:
Warning: This script was written specifically for this user, for use on that particular machine. Do not run this script on another machine.

1. Download the attachment fixlist.txt and save it to your desktop.
2. Right-click on FRST64.exe and select "Run as administrator".
3. Press the Fix button.
4. The tool will now process fixlist.txt.
5. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
6. When finished, a log called Fixlog.txt will appear in the same directory the tool is run from.
7. Attach the logfile Fixlog.txt to your next reply.

Step 2:
Restart the machine.
Run the command sfc /scannow in an elevated commandprompt and report the result.
If it fails, copy the file C:\Windows\Logs\CBS\cbs.log to your desktop.
Zip the copied file and attach the zipped cbs.log to your next reply.

 

[llbcjosh]

SFC scan completed successfully.

 

[PeterJ]

Run the command Dism /Online /Cleanup-Image /RestoreHealth in an elevated commandprompt and report the result.
If it fails, copy the file C:\Windows\Logs\CBS\cbs.log to your desktop.
Zip the copied file and attach the zipped cbs.log to your next reply.

 

[llbcjosh]

I don't know what's happening now, but DISM appears to hang when I start it. It just sits at this screen with a blinking cursor.

 

[llbcjosh]

OK, ignore that last reply. I stopped it, rebooted, and now it's running.

 

[llbcjosh]

Failed at 99.7% again with the same error.

 

[PeterJ]

Step 1:
WARNING! The following fix is specific to the user's system in this thread only. No one else should follow these instructions, as it could damage your system.

• Download the attachment SFCFix.zip and save it on your desktop.
• Save any work you have open, and close all programs.
• Drag the SFCFix.zip file over the SFCFix.exe executable and release it.
  
  
• SFCFix will launch, let it complete.
• Once done, a file will appear on your desktop, called SFCFix.txt.
• Attach the file to your next reply.

Step 2:
Restart the machine.
Run the command sfc /scannow in an elevated commandprompt and report the result.
If it fails, copy the file C:\Windows\Logs\CBS\cbs.log to your desktop.
Zip the copied file and attach the zipped cbs.log to your next reply.

 

[llbcjosh]

Scan completed successfully.

 

[PeterJ]

Step 1:
WARNING! The following fix is specific to the user's system in this thread only. No one else should follow these instructions, as it could damage your system.

• Download the attachment SFCFix.zip and save it on your desktop.
• Save any work you have open, and close all programs.
• Drag the SFCFix.zip file over the SFCFix.exe executable and release it.
  
  
• SFCFix will launch, let it complete.
• Once done, a file will appear on your desktop, called SFCFix.txt.
• Attach the file to your next reply.

Step 2:
Restart the machine.
Run the command sfc /scannow in an elevated commandprompt and report the result.
If it fails, copy the file C:\Windows\Logs\CBS\cbs.log to your desktop.
Zip the copied file and attach the zipped cbs.log to your next reply.

 

[llbcjosh]

Scan finished without any errors.

 

[PeterJ]

Run the command Dism /Online /Cleanup-Image /RestoreHealth in an elevated commandprompt and report the result.
If it fails, copy the file C:\Windows\Logs\CBS\cbs.log to your desktop.
Zip the copied file and attach the zipped cbs.log to your next reply.