Windows 8.1 (nonPro) 64bit - Restarted due to non working MS Office 2016 and now BSOD INACCESSIBLE_BOOT_DEVICE

Hello please find logs attached.

Microsoft Windows [Version 6.3.9600]
(c) 2013 Microsoft Corporation. All rights reserved.

C:\Windows\system32>Dism /Online /Cleanup-Image /analyzecomponentstore

Deployment Image Servicing and Management tool
Version: 6.3.9600.19408

Image Version: 6.3.9600.19397

[===========================99.8%========================= ]

Error: 0x800f080d

DISM failed. No operation was performed.
For more information, review the log file.

The DISM log file can be found at C:\Windows\Logs\DISM\dism.log

C:\Windows\system32>
 

Attachments

Step 1:
WARNING! The following fix is specific to the user's system in this thread only. No one else should follow these instructions, as it could damage your system.
  • Download the attachment SFCFix.zip and save it on your desktop.
  • Save any work you have open, and close all programs.
  • Drag the SFCFix.zip file over the SFCFix.exe executable and release it.
    1p8eDnI.gif
  • SFCFix will launch, let it complete.
  • Once done, a file will appear on your desktop, called SFCFix.txt.
  • Open the file, then copy and paste its content in your next reply.

Step 2:
Restart the machine.
Run the command Dism /Online /Cleanup-Image /analyzecomponentstore in an elevated commandprompt and report the result.
If it fails, copy the file C:\Windows\Logs\CBS\cbs.log to your desktop.
Zip the copied file and attach the zipped cbs.log to your next reply.
 

Attachments

Remove Update Manually
  1. Right-Click the Start button and click Command Prompt (Admin) on the list.
  2. When command prompt opens, copy and paste the following command into it, then press enter.
    wusa /uninstall /KB:5011564
  3. Let me know if it says it was successful or if there are any errors.
 
FRST Registry Search
  1. Click the Start button and in the search box, type CMD
  2. When you see cmd.exe on the list, right-click on it and select Run as administrator.
  3. When command prompt opens, copy and paste the following command into it, press enter afterwards.
    Code: 
    REG LOAD HKLM\COMPONENTS C:\Windows\System32\config\COMPONENTS

    Note: This loads your components hive which is what we want. Please keep the command prompt window open while you perform the remaining steps. You can minimize it if you wish but keep it open.
  4. Right-click on the file FRST64.exe and choose Run as administrator.
  5. Copy and paste KB5011564 into the Search box and click the Search Registry button.
  6. When the scan is complete, a message will display that 'SearchReg.txt' is saved in the same folder FRST was started from. Notepad will open this file also. Close Notepad and attach the file 'SearchReg.txt' to your next reply.
  7. You may close any remaining open windows now.
 
Step 1:
Warning: This script was written specifically for this user, for use on that particular machine. Do not run this script on another machine.
  1. Download the attachment fixlist.txt and save it to your desktop.
  2. Right-click on FRST64.exe and select "Run as administrator".
  3. Press the Fix button.
  4. The tool will now process fixlist.txt.
  5. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
  6. When finished, a log called Fixlog.txt will appear in the same directory the tool is run from.
  7. Attach the logfile Fixlog.txt to your next reply.

Step 2:
Restart the machine.
Run the command sfc /scannow in an elevated commandprompt and report the result.
If it fails, copy the file C:\Windows\Logs\CBS\cbs.log to your desktop.
Zip the copied file and attach the zipped cbs.log to your next reply.
 

Attachments

Run the command Dism /Online /Cleanup-Image /analyzecomponentstore in an elevated commandprompt and report the result.
If it fails, copy the file C:\Windows\Logs\CBS\cbs.log to your desktop.
Zip the copied file and attach the zipped cbs.log to your next reply.
 
Step 1:
WARNING! The following fix is specific to the user's system in this thread only. No one else should follow these instructions, as it could damage your system.
  • Download the attachment SFCFix.zip and save it on your desktop.
  • Save any work you have open, and close all programs.
  • Drag the SFCFix.zip file over the SFCFix.exe executable and release it.
    1p8eDnI.gif
  • SFCFix will launch, let it complete.
  • Once done, a file will appear on your desktop, called SFCFix.txt.
  • Open the file, then copy and paste its content in your next reply.

Step 2:
Restart the machine.
Run the command sfc /scannow in an elevated commandprompt and report the result.
If it fails, copy the file C:\Windows\Logs\CBS\cbs.log to your desktop.
Zip the copied file and attach the zipped cbs.log to your next reply.
 

Attachments

Last edited:
Good spot. It's the right attachment but the wrong instructions in step 1 which is corrected now.
 
Your attachment is the fix I provided, not the result of that fix (SFCFix.txt).


Run the command Dism /Online /Cleanup-Image /analyzecomponentstore in an elevated commandprompt and report the result.
If it fails, copy the file C:\Windows\Logs\CBS\cbs.log to your desktop.
Zip the copied file and attach the zipped cbs.log to your next reply.
 
Restart the machine.
Run the command Dism /Online /Cleanup-Image /analyzecomponentstore in an elevated commandprompt again and report the result.
If it fails, copy the file C:\Windows\Logs\CBS\cbs.log to your desktop.
Zip the copied file and attach the zipped cbs.log to your next reply.
 
You must log in or register to reply here.

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top