C Cooleds Active member Joined Mar 8, 2019 Posts 27 Mar 31, 2019 #21 ⚠ Attachments Fixlog.txt 390.9 KB · Views: 1
P PeterJ Moderator, Windows Update Expert, Security Analyst Staff member Joined Dec 14, 2014 Posts 12,532 Mar 31, 2019 #22 Perform the instructions in message #3 again and report the result.
C Cooleds Active member Joined Mar 8, 2019 Posts 27 Apr 2, 2019 #23 I did it early. Error window: No fixlist found. Should I download again? your fixlist ? ok Attachments Fixlog.txt 381.8 KB · Views: 1
C Cooleds Active member Joined Mar 8, 2019 Posts 27 Apr 2, 2019 #24 By the way, this problematic update has disappeared (as well as many other problematic updates, which I moved to the list of hidden ones). Only two updates left. The first one was updated, I rebooted the computer, but the second update is not installed. kb4054566 Error 80092004 Attachments CBS.zip 4.9 MB · Views: 2
By the way, this problematic update has disappeared (as well as many other problematic updates, which I moved to the list of hidden ones). Only two updates left. The first one was updated, I rebooted the computer, but the second update is not installed. kb4054566 Error 80092004
P PeterJ Moderator, Windows Update Expert, Security Analyst Staff member Joined Dec 14, 2014 Posts 12,532 Apr 4, 2019 #26 Retrieve Components Hive 1. Navigate to C:\Windows\System32\Config and locate the COMPONENTS file. 2. Please copy this file to your desktop. Note: If you receive an error that this file is in-use, simply reboot your computer and try again. Note: If you find that you need to reboot and are unable to because this is a server then try Option#2 below. 3. Right-click on this file on your desktop and select Send To...Compressed (zipped) folder. This will create a file named COMPONENTS.ZIP on your desktop. 4. The file will likely be too large to upload here so please upload to SendSpace and just provide the link here. Option#2 (only if you are unable to follow the previous instructions) Please download the Freeware RegBak from here: Acelogix Software - Download products You will find it at the bottom of the page that the link brings you to. Go ahead and install this program and accept all the defaults. After the last install screen the program should open. Click the New Backup button. Accept the defaults and simply click Start. When it says Finished successfully, click the Close button. This will bring you back to the main screen of the program. You will see one entry in this list with the date that you did it. Right-click on this line-item and select Explore Backup... This will bring you into the folder where the backup was made. You should see a Users folder and a Windows folder along with a couple other files. Double-click on the Windows folder to open it. Then open the System32 folder and then config folder. You should see around 6 files in here, one of which is named COMPONENTS. Copy the COMPONENTS file to your Desktop. If the COMPONENTS file does not exist, please fetch it instead from C:\Windows\System32\config\COMPONENTS. Now right-click on the COMPONENTS file that is on your desktop and select Send to > Compressed (zipped) folder. Then please upload the zip file (COMPONENTS.zip) to your favourite file sharing website (it will be too big to upload here). Examples of services to upload to are Filedropper or One Drive or SendSpace and then just provide the link in your reply. You can close any open windows you have as well as the RegBak program now.
Retrieve Components Hive 1. Navigate to C:\Windows\System32\Config and locate the COMPONENTS file. 2. Please copy this file to your desktop. Note: If you receive an error that this file is in-use, simply reboot your computer and try again. Note: If you find that you need to reboot and are unable to because this is a server then try Option#2 below. 3. Right-click on this file on your desktop and select Send To...Compressed (zipped) folder. This will create a file named COMPONENTS.ZIP on your desktop. 4. The file will likely be too large to upload here so please upload to SendSpace and just provide the link here. Option#2 (only if you are unable to follow the previous instructions) Please download the Freeware RegBak from here: Acelogix Software - Download products You will find it at the bottom of the page that the link brings you to. Go ahead and install this program and accept all the defaults. After the last install screen the program should open. Click the New Backup button. Accept the defaults and simply click Start. When it says Finished successfully, click the Close button. This will bring you back to the main screen of the program. You will see one entry in this list with the date that you did it. Right-click on this line-item and select Explore Backup... This will bring you into the folder where the backup was made. You should see a Users folder and a Windows folder along with a couple other files. Double-click on the Windows folder to open it. Then open the System32 folder and then config folder. You should see around 6 files in here, one of which is named COMPONENTS. Copy the COMPONENTS file to your Desktop. If the COMPONENTS file does not exist, please fetch it instead from C:\Windows\System32\config\COMPONENTS. Now right-click on the COMPONENTS file that is on your desktop and select Send to > Compressed (zipped) folder. Then please upload the zip file (COMPONENTS.zip) to your favourite file sharing website (it will be too big to upload here). Examples of services to upload to are Filedropper or One Drive or SendSpace and then just provide the link in your reply. You can close any open windows you have as well as the RegBak program now.
C Cooleds Active member Joined Mar 8, 2019 Posts 27 Apr 5, 2019 #27 components.zip (24.58MB) - SendSpace.com
P PeterJ Moderator, Windows Update Expert, Security Analyst Staff member Joined Dec 14, 2014 Posts 12,532 Apr 7, 2019 #28 Follow the instructions below please. WARNING! The following fix is specific to the user's system in this thread only. No one else should follow these instructions, as it could damage your system. Download the attachment SFCFix.zip and save it on your desktop. Save any work you have open, and close all programs. Drag the SFCFix.zip file over the SFCFix.exe executable and release it. SFCFix will launch, let it complete. Once done, a file will appear on your desktop, called SFCFix.txt. Open the file, then copy and paste its content in your next reply. Attachments SFCFix.zip 11.5 KB · Views: 2
Follow the instructions below please. WARNING! The following fix is specific to the user's system in this thread only. No one else should follow these instructions, as it could damage your system. Download the attachment SFCFix.zip and save it on your desktop. Save any work you have open, and close all programs. Drag the SFCFix.zip file over the SFCFix.exe executable and release it. SFCFix will launch, let it complete. Once done, a file will appear on your desktop, called SFCFix.txt. Open the file, then copy and paste its content in your next reply.
C Cooleds Active member Joined Mar 8, 2019 Posts 27 Apr 11, 2019 #29 Attachments SFCFix.txt 5.9 KB · Views: 1
P PeterJ Moderator, Windows Update Expert, Security Analyst Staff member Joined Dec 14, 2014 Posts 12,532 Apr 11, 2019 #30 Check Windows Update again and report the result. If it fails, run sfc /scannow again and attach the zipped cbs.log to your next reply.
Check Windows Update again and report the result. If it fails, run sfc /scannow again and attach the zipped cbs.log to your next reply.
C Cooleds Active member Joined Mar 8, 2019 Posts 27 Apr 12, 2019 #31 same Attachments CBS.log 1,019.6 KB · Views: 1
P PeterJ Moderator, Windows Update Expert, Security Analyst Staff member Joined Dec 14, 2014 Posts 12,532 Apr 13, 2019 #32 Go to the Control Panel - Windows Update - Settings. Take a screenshot. Read this on how to take a screenshot. Upload the image file to a file-sharing site such as Filedropper or SendSpace and post the downloadlink.
Go to the Control Panel - Windows Update - Settings. Take a screenshot. Read this on how to take a screenshot. Upload the image file to a file-sharing site such as Filedropper or SendSpace and post the downloadlink.
C Cooleds Active member Joined Mar 8, 2019 Posts 27 Apr 13, 2019 #33 https://s3.amazonaws.com/ssi-article-images/windows/win8/winupdate-win8-04.jpg This is not my screenshot, because my windows are not in English, but I have the SAME settings !
https://s3.amazonaws.com/ssi-article-images/windows/win8/winupdate-win8-04.jpg This is not my screenshot, because my windows are not in English, but I have the SAME settings !
P PeterJ Moderator, Windows Update Expert, Security Analyst Staff member Joined Dec 14, 2014 Posts 12,532 Apr 13, 2019 #34 Please select "Download updates but let me choose whether to install them" and reboot the machine. Last edited: Apr 14, 2019
C Cooleds Active member Joined Mar 8, 2019 Posts 27 Apr 14, 2019 #35 Obviously, there are no changes. Updating is not established, same error. It seems to me - it is not to correct any more. Can be simple it to hide?
Obviously, there are no changes. Updating is not established, same error. It seems to me - it is not to correct any more. Can be simple it to hide?
P PeterJ Moderator, Windows Update Expert, Security Analyst Staff member Joined Dec 14, 2014 Posts 12,532 Apr 14, 2019 #36 Please attach the zipped cbs.log to your next reply.
C Cooleds Active member Joined Mar 8, 2019 Posts 27 May 3, 2019 #37 Attachments CBS.zip 5.1 MB · Views: 1
P PeterJ Moderator, Windows Update Expert, Security Analyst Staff member Joined Dec 14, 2014 Posts 12,532 May 3, 2019 #38 Remove Update Manually Click on the Start button and in the search box, type Command Prompt. When you see Command Prompt on the list, right-click on it and select Run as administrator. When command prompt opens, copy and paste the following command into it, then press enter. wusa /uninstall /KB:4338419 Let me know if it says it was successful or if there are any errors.
Remove Update Manually Click on the Start button and in the search box, type Command Prompt. When you see Command Prompt on the list, right-click on it and select Run as administrator. When command prompt opens, copy and paste the following command into it, then press enter. wusa /uninstall /KB:4338419 Let me know if it says it was successful or if there are any errors.
C Cooleds Active member Joined Mar 8, 2019 Posts 27 May 9, 2019 #39 KB:4338419 Non installed on this computer
P PeterJ Moderator, Windows Update Expert, Security Analyst Staff member Joined Dec 14, 2014 Posts 12,532 May 10, 2019 #40 FRST Registry Search Click your Start button and choose Control Panel. In the upper right corner ensure the View by: is set to Category. Select the Programs group. Click the Turn Windows features on or off link. This will bring up the Server Manager dialog. Note: This loads your components hive which is what we want. Please keep this dialog open while you perform the remaining steps. You can minimize it if you wish but keep it open. Right-click on the file FRST64.exe and choose Run as administrator. Copy and paste KB4338419 into the Search box and click the Search Registry button. When the scan is complete, a message will display that 'SearchReg.txt' is saved in the same folder FRST was started from. Notepad will open this file also. Close Notepad and attach the file 'SearchReg.txt' to your next reply. You may close any remaining open windows now.
FRST Registry Search Click your Start button and choose Control Panel. In the upper right corner ensure the View by: is set to Category. Select the Programs group. Click the Turn Windows features on or off link. This will bring up the Server Manager dialog. Note: This loads your components hive which is what we want. Please keep this dialog open while you perform the remaining steps. You can minimize it if you wish but keep it open. Right-click on the file FRST64.exe and choose Run as administrator. Copy and paste KB4338419 into the Search box and click the Search Registry button. When the scan is complete, a message will display that 'SearchReg.txt' is saved in the same folder FRST was started from. Notepad will open this file also. Close Notepad and attach the file 'SearchReg.txt' to your next reply. You may close any remaining open windows now.