[SOLVED] Windows 7 update to Windows 10 issue.

segerydrth · Jan 2, 2020

I run into this error when i try to update to windows 10 using the Media Creation Tool from Microsoft.
0x8007001f - 0x20006
I have tried doing Clean boot, SFC fix and also Windows Update troubleshooter but the issue is still here.

segerydrth · Jan 2, 2020

This is the SFCFix txt
When i use the SURT it is stuck on Initializing installation... , it has been stuck on this for one hour before i canceled.
I cannot seem to upload the CBS file as the zip is too large.

Sysnative Windows Update · Jan 2, 2020

Hi!

Leave SURT running for overnight.

segerydrth · Jan 2, 2020

Hi i left SURT running overnight, it has completed, here is the log file.

Sysnative Windows Update · Jan 2, 2020

SFCFix Script

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

Download SFCFix.exe (by niemiro) and save this to your Desktop.
Download the file below, SFCFix.zip, and save this to your Desktop. Ensure that this file is named SFCFix.zip - do not rename it.
Save any open documents and close all open windows.
On your Desktop, you should see two files: SFCFix.exe and SFCFix.zip.
Drag the file SFCFix.zip onto the file SFCFix.exe and release it.
SFCFix will now process the script.
Upon completion, a file should be created on your Desktop: SFCFix.txt.
Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this file into your next post for me to analyse please - put [CODE][/CODE] tags around the log to break up the text.

Afterwards run SURT again and attach CheckSUR.log.

segerydrth · Jan 2, 2020

Hello, i am not sure how to put

Code:

tags as it says i have too many characters , i have attached the sfcfix.txt to this post, i am currently running SURT again.

Sysnative Windows Update · Jan 2, 2020

That's fine. Just keep attaching.

segerydrth · Jan 2, 2020

I have attached the new CheckSUR.log

Sysnative Windows Update · Jan 2, 2020

FRST Registry Search
1. Click your Start button and type in cmd.
2.After you find the Command Prompt, right click on it and select Run as Administrator.
3. Copy and paste the following into the Command Prompt:

reg load HKLM\COMPONENTS C:\WINDOWS\SYSTEM32\CONFIG\COMPONENTS

4. Please download Farbar Recovery Scan Tool and save it to your Desktop.
Note: You need to run the 64-bit Version so please ensure you download that one.
5. Run FRST64 by Right-Clicking on the file and choosing Run as administrator.
6. Copy and paste KB2952664;KB3097877;KB3035583 into the Search box and click the Search Registry button.
7. When the scan is complete a notepad window will open with the results. Please attach this to your next reply. It is saved on your desktop named SearchReg.txt.

segerydrth · Jan 2, 2020

Hello, i have attached SearchReg.txt.

Sysnative Windows Update · Jan 2, 2020

Step#1 - FRST Fix
NOTICE: This script was written specifically for this user, for use on that particular machine. Running this on another machine may cause damage to your operating system
1. Please download Farbar Recovery Scan Tool and save it to your Desktop.
Note: You need to run the 64-bit Version so please ensure you download that one.
2. Download the attached fixlist.txt and save it to the Desktop.
Note. It's important that both files, FRST64 and fixlist.txt are in the same location or the fix will not work (in this case...the desktop).
3. Run FRST64 by Right-Clicking on the file and choosing Run as administrator.
4. Press the Fix button just once and wait. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
5. When finished FRST64 will generate a log on the Desktop (Fixlog.txt). Please post the contents of it in your reply.

segerydrth · Jan 2, 2020

Hello, i have attached the fixlog.

Sysnative Windows Update · Jan 2, 2020

Hi!

Retry Windows 10 upgrade.

segerydrth · Jan 3, 2020

Hello, the update was successful, thank you very much for your help.

Sysnative Windows Update · Jan 3, 2020

Hi!

That's awesome!

[SOLVED] Windows 7 update to Windows 10 issue.

Member

Member

Attachments

Inactive

Member

Attachments

Inactive

Attachments

Member

Attachments

Inactive

Member

Attachments

Inactive

Member

Attachments

Inactive

Attachments

Member

Attachments

Inactive

Member

Inactive