P peteman Member Joined May 23, 2020 Posts 15 May 23, 2020 #1 Update to windows 10, fails: error code 0x8007001f 0x20006 also unable to run windows 7 update Errors on win 7 are 80092004 and 80073712 Tried SFC and SFCFIX logs attached Attachments SFCFix.txt 2.3 KB · Views: 5 sfcdetails.txt 76.5 KB · Views: 2 win7 update errors.JPG 53.4 KB · Views: 3
Update to windows 10, fails: error code 0x8007001f 0x20006 also unable to run windows 7 update Errors on win 7 are 80092004 and 80073712 Tried SFC and SFCFIX logs attached
P PeterJ Moderator, Windows Update Expert, Security Analyst Staff member Joined Dec 14, 2014 Posts 12,616 May 23, 2020 #2 Hello and welcome, Click on the Start button and in the search box, type Command Prompt When you see Command Prompt on the list, right-click on it and select Run as administrator. When command prompt opens, copy and paste the following command into it, press enter afterwards. Code: copy %windir%\logs\cbs\cbs.log "%userprofile%\Desktop\cbs.txt" This will create a file, cbs.txt on your Desktop. Please attach this to your next post. Note: if the file is too big to upload to your next post please upload via a service such as Filedropper or One Drive or SendSpace and just provide the download link. Attach the logfile C:\Windows\Logs\CBS\CheckSUR.log to your next reply also.
Hello and welcome, Click on the Start button and in the search box, type Command Prompt When you see Command Prompt on the list, right-click on it and select Run as administrator. When command prompt opens, copy and paste the following command into it, press enter afterwards. Code: copy %windir%\logs\cbs\cbs.log "%userprofile%\Desktop\cbs.txt" This will create a file, cbs.txt on your Desktop. Please attach this to your next post. Note: if the file is too big to upload to your next post please upload via a service such as Filedropper or One Drive or SendSpace and just provide the download link. Attach the logfile C:\Windows\Logs\CBS\CheckSUR.log to your next reply also.
P peteman Member Joined May 23, 2020 Posts 15 May 23, 2020 #3 C:\Windows\Logs\CBS\CheckSUR.log is empty cbs.log attached as cbs.txt Attachments cbs.txt 1.8 MB · Views: 2
P PeterJ Moderator, Windows Update Expert, Security Analyst Staff member Joined Dec 14, 2014 Posts 12,616 May 24, 2020 #4 Follow the instructions below please. Step 1: WARNING! The following fix is specific to the user's system in this thread only. No one else should follow these instructions, as it could damage your system. Download the attachment SFCFix.zip and save it on your desktop. Save any work you have open, and close all programs. Drag the SFCFix.zip file over the SFCFix.exe executable and release it. SFCFix will launch, let it complete. Once done, a file will appear on your desktop, called SFCFix.txt. Open the file, then copy and paste its content in your next reply. Step 2: Follow the instructions below to run a scan with the System Update Readiness Tool (SURT) and provide a log. Download SURT for your system. (Windows 7 SP1 x64) Once downloaded, execute the installer, and go through the installation (this process can take around 15-20 minutes). On completion, a log will be created in C:\Windows\Logs\CBS\CheckSUR.log. Attach this log in your next reply. Alternatively, if these instructions are unclear for you, you can follow the tutorial below. System Update Readiness Tool (SURT) Attachments SFCFix.zip 1.2 KB · Views: 5
Follow the instructions below please. Step 1: WARNING! The following fix is specific to the user's system in this thread only. No one else should follow these instructions, as it could damage your system. Download the attachment SFCFix.zip and save it on your desktop. Save any work you have open, and close all programs. Drag the SFCFix.zip file over the SFCFix.exe executable and release it. SFCFix will launch, let it complete. Once done, a file will appear on your desktop, called SFCFix.txt. Open the file, then copy and paste its content in your next reply. Step 2: Follow the instructions below to run a scan with the System Update Readiness Tool (SURT) and provide a log. Download SURT for your system. (Windows 7 SP1 x64) Once downloaded, execute the installer, and go through the installation (this process can take around 15-20 minutes). On completion, a log will be created in C:\Windows\Logs\CBS\CheckSUR.log. Attach this log in your next reply. Alternatively, if these instructions are unclear for you, you can follow the tutorial below. System Update Readiness Tool (SURT)
P peteman Member Joined May 23, 2020 Posts 15 May 24, 2020 #5 Requested files attached. Thank you Attachments SFCFix.txt 4.7 KB · Views: 2 CheckSUR.log 2.1 KB · Views: 1
P PeterJ Moderator, Windows Update Expert, Security Analyst Staff member Joined Dec 14, 2014 Posts 12,616 May 24, 2020 #6 Step 1: WARNING! The following fix is specific to the user's system in this thread only. No one else should follow these instructions, as it could damage your system. Download the attachment SFCFix.zip and save it on your desktop. Save any work you have open, and close all programs. Drag the SFCFix.zip file over the SFCFix.exe executable and release it. SFCFix will launch, let it complete. Once done, a file will appear on your desktop, called SFCFix.txt. Open the file, then copy and paste its content in your next reply. Step 2: Start the System Update Readiness Tool (SURT) again. On completion, attach the logfile C:\Windows\Logs\CBS\CheckSUR.log to your next reply. Attachments SFCFix.zip 18 KB · Views: 1
Step 1: WARNING! The following fix is specific to the user's system in this thread only. No one else should follow these instructions, as it could damage your system. Download the attachment SFCFix.zip and save it on your desktop. Save any work you have open, and close all programs. Drag the SFCFix.zip file over the SFCFix.exe executable and release it. SFCFix will launch, let it complete. Once done, a file will appear on your desktop, called SFCFix.txt. Open the file, then copy and paste its content in your next reply. Step 2: Start the System Update Readiness Tool (SURT) again. On completion, attach the logfile C:\Windows\Logs\CBS\CheckSUR.log to your next reply.
P peteman Member Joined May 23, 2020 Posts 15 May 24, 2020 #7 Ran SFCFix and reran SURT, output from both attached Thanks Attachments CheckSUR.log 394 bytes · Views: 1 SFCFix.txt 8.4 KB · Views: 1
P PeterJ Moderator, Windows Update Expert, Security Analyst Staff member Joined Dec 14, 2014 Posts 12,616 May 24, 2020 #8 Restart the computer. Check Windows Update again and report the result. If it fails, attach the zipped cbs.log to your next reply.
Restart the computer. Check Windows Update again and report the result. If it fails, attach the zipped cbs.log to your next reply.
P peteman Member Joined May 23, 2020 Posts 15 May 24, 2020 #9 Windows update failed, Code 80092004 zipped cbs.log and link CBS.ZIP Last edited: May 24, 2020
P PeterJ Moderator, Windows Update Expert, Security Analyst Staff member Joined Dec 14, 2014 Posts 12,616 May 24, 2020 #10 Step 1: Retrieve Components Hive 1. Navigate to C:\Windows\System32\Config and locate the COMPONENTS file. 2. Please copy this file to your desktop. Note: If you receive an error that this file is in-use, simply reboot your computer and try again. Note: If you find that you need to reboot and are unable to because this is a server then try Option#2 below. 3. Right-click on this file on your desktop and select Send To...Compressed (zipped) folder. This will create a file named COMPONENTS.ZIP on your desktop. 4. The file will likely be too large to upload here so please upload to SendSpace and just provide the link here. Option#2 (only if you are unable to follow the previous instructions) Please download the Freeware RegBak from here: Acelogix Software - Download products You will find it at the bottom of the page that the link brings you to. Go ahead and install this program and accept all the defaults. After the last install screen the program should open. Click the New Backup button. Accept the defaults and simply click Start. When it says Finished successfully, click the Close button. This will bring you back to the main screen of the program. You will see one entry in this list with the date that you did it. Right-click on this line-item and select Explore Backup... This will bring you into the folder where the backup was made. You should see a Users folder and a Windows folder along with a couple other files. Double-click on the Windows folder to open it. Then open the System32 folder and then config folder. You should see around 6 files in here, one of which is named COMPONENTS. Copy the COMPONENTS file to your Desktop. If the COMPONENTS file does not exist, please fetch it instead from C:\Windows\System32\config\COMPONENTS. Now right-click on the COMPONENTS file that is on your desktop and select Send to > Compressed (zipped) folder. Then please upload the zip file (COMPONENTS.zip) to your favourite file sharing website (it will be too big to upload here). Examples of services to upload to are Filedropper or One Drive or SendSpace and then just provide the link in your reply. You can close any open windows you have as well as the RegBak program now. Step 2: Remove Update Manually Click on the Start button and in the search box, type Command Prompt. When you see Command Prompt on the list, right-click on it and select Run as administrator. When command prompt opens, copy and paste the following command into it, then press enter. wusa /uninstall /KB:4532945 Let me know if it says it was successful or if there are any errors. Last edited: May 24, 2020
Step 1: Retrieve Components Hive 1. Navigate to C:\Windows\System32\Config and locate the COMPONENTS file. 2. Please copy this file to your desktop. Note: If you receive an error that this file is in-use, simply reboot your computer and try again. Note: If you find that you need to reboot and are unable to because this is a server then try Option#2 below. 3. Right-click on this file on your desktop and select Send To...Compressed (zipped) folder. This will create a file named COMPONENTS.ZIP on your desktop. 4. The file will likely be too large to upload here so please upload to SendSpace and just provide the link here. Option#2 (only if you are unable to follow the previous instructions) Please download the Freeware RegBak from here: Acelogix Software - Download products You will find it at the bottom of the page that the link brings you to. Go ahead and install this program and accept all the defaults. After the last install screen the program should open. Click the New Backup button. Accept the defaults and simply click Start. When it says Finished successfully, click the Close button. This will bring you back to the main screen of the program. You will see one entry in this list with the date that you did it. Right-click on this line-item and select Explore Backup... This will bring you into the folder where the backup was made. You should see a Users folder and a Windows folder along with a couple other files. Double-click on the Windows folder to open it. Then open the System32 folder and then config folder. You should see around 6 files in here, one of which is named COMPONENTS. Copy the COMPONENTS file to your Desktop. If the COMPONENTS file does not exist, please fetch it instead from C:\Windows\System32\config\COMPONENTS. Now right-click on the COMPONENTS file that is on your desktop and select Send to > Compressed (zipped) folder. Then please upload the zip file (COMPONENTS.zip) to your favourite file sharing website (it will be too big to upload here). Examples of services to upload to are Filedropper or One Drive or SendSpace and then just provide the link in your reply. You can close any open windows you have as well as the RegBak program now. Step 2: Remove Update Manually Click on the Start button and in the search box, type Command Prompt. When you see Command Prompt on the list, right-click on it and select Run as administrator. When command prompt opens, copy and paste the following command into it, then press enter. wusa /uninstall /KB:4532945 Let me know if it says it was successful or if there are any errors.
P peteman Member Joined May 23, 2020 Posts 15 May 24, 2020 #11 Step 2 Message : "The Update KB4532945 is not installed on this computer" file load to One Drive components.zip
Step 2 Message : "The Update KB4532945 is not installed on this computer" file load to One Drive components.zip
P PeterJ Moderator, Windows Update Expert, Security Analyst Staff member Joined Dec 14, 2014 Posts 12,616 May 24, 2020 #12 FRST Registry Search Click the Start button and choose Control Panel. In the upper right corner ensure the View by: is set to Category. Select the Programs group. Click the Turn Windows features on or off link. This will bring up the Server Manager dialog. Note: This loads your components hive which is what we want. Please keep this dialog open while you perform the remaining steps. You can minimize it if you wish but keep it open. Download the Farbar Recovery Scan Tool and save it to your Desktop: 64-bit: Downloading Farbar Recovery Scan Tool Right-click on the file FRST64.exe and choose Run as administrator. Copy and paste KB4532945 into the Search box and click the Search Registry button. When the scan is complete, a message will display that 'SearchReg.txt' is saved in the same folder FRST was started from. Notepad will open this file also. Close Notepad and attach the file 'SearchReg.txt' to your next reply. You may close any remaining open windows now.
FRST Registry Search Click the Start button and choose Control Panel. In the upper right corner ensure the View by: is set to Category. Select the Programs group. Click the Turn Windows features on or off link. This will bring up the Server Manager dialog. Note: This loads your components hive which is what we want. Please keep this dialog open while you perform the remaining steps. You can minimize it if you wish but keep it open. Download the Farbar Recovery Scan Tool and save it to your Desktop: 64-bit: Downloading Farbar Recovery Scan Tool Right-click on the file FRST64.exe and choose Run as administrator. Copy and paste KB4532945 into the Search box and click the Search Registry button. When the scan is complete, a message will display that 'SearchReg.txt' is saved in the same folder FRST was started from. Notepad will open this file also. Close Notepad and attach the file 'SearchReg.txt' to your next reply. You may close any remaining open windows now.
P peteman Member Joined May 23, 2020 Posts 15 May 24, 2020 #13 SearchReg.txt attached Thanks Attachments SearchReg.txt 413 bytes · Views: 5
P PeterJ Moderator, Windows Update Expert, Security Analyst Staff member Joined Dec 14, 2014 Posts 12,616 May 25, 2020 #14 Step 1: Warning: This script was written specifically for this user, for use on that particular machine. Do not run this script on another machine. Download the attachment fixlist.txt and save it to your desktop. Right-click on FRST64.exe and select "Run as administrator". Press the Fix button. The tool will now process fixlist.txt. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run. When finished, a log called Fixlog.txt will appear in the same directory the tool is run from. Post the logfile Fixlog.txt as attachment in your next reply. Step 2: Check Windows Update again and report the result. If it fails, attach the zipped cbs.log to your next reply. Attachments fixlist.txt 191 bytes · Views: 3
Step 1: Warning: This script was written specifically for this user, for use on that particular machine. Do not run this script on another machine. Download the attachment fixlist.txt and save it to your desktop. Right-click on FRST64.exe and select "Run as administrator". Press the Fix button. The tool will now process fixlist.txt. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run. When finished, a log called Fixlog.txt will appear in the same directory the tool is run from. Post the logfile Fixlog.txt as attachment in your next reply. Step 2: Check Windows Update again and report the result. If it fails, attach the zipped cbs.log to your next reply.
P peteman Member Joined May 23, 2020 Posts 15 May 25, 2020 #15 Fixlog attached. Windows updates failed Code 80092004 Link to CBS.ZIP Attachments Fixlog.txt 772 bytes · Views: 1
P PeterJ Moderator, Windows Update Expert, Security Analyst Staff member Joined Dec 14, 2014 Posts 12,616 May 25, 2020 #16 Retrieve Software Hive 1. Navigate to C:\Windows\System32\Config and locate the SOFTWARE file. 2. Please copy this file to your desktop. Note: If you receive an error that this file is in-use, try Option#2 below. 3. Right-click on this file on your desktop and select Send To...Compressed (zipped) folder. This will create a file named SOFTWARE.ZIP on your desktop. 4. Upload the zip file (SOFTWARE.zip) to your favourite file sharing website (it will be too big to upload here). Examples of services to upload to are FileDropper or One Drive or SendSpace. 5. Note: Send the downloadlink in a private message as the SOFTWARE hive contains sensitive information! Option#2 (only if you are unable to follow the previous instructions) Please download the Freeware RegBak from here: Acelogix Software - Download products You will find it at the bottom of the page that the link brings you to. Go ahead and install this program and accept all the defaults. After the last install screen the program should open. Click the New Backup button. Accept the defaults and simply click Start. When it says Finished successfully, click the Close button. This will bring you back to the main screen of the program. You will see one entry in this list with the date that you did it. Right-click on this line-item and select Explore Backup... This will bring you into the folder where the backup was made. You should see a Users folder and a Windows folder along with a couple other files. Double-click on the Windows folder to open it. Then open the System32 folder and then config folder. You should see around 6 files in here, one of which is named SOFTWARE. Copy the SOFTWARE file to your Desktop. If the SOFTWARE file does not exist, please fetch it instead from C:\Windows\System32\config\SOFTWARE. Now right-click on the SOFTWARE file that is on your desktop and select Send to > Compressed (zipped) folder. Then please upload the zip file (SOFTWARE.zip) to your favourite file sharing website (it will be too big to upload here). Examples of services to upload to are FileDropper or One Drive or SendSpace. Note: Send the downloadlink in a private message as the SOFTWARE hive contains sensitive information! You can close any open windows you have as well as the RegBak program now.
Retrieve Software Hive 1. Navigate to C:\Windows\System32\Config and locate the SOFTWARE file. 2. Please copy this file to your desktop. Note: If you receive an error that this file is in-use, try Option#2 below. 3. Right-click on this file on your desktop and select Send To...Compressed (zipped) folder. This will create a file named SOFTWARE.ZIP on your desktop. 4. Upload the zip file (SOFTWARE.zip) to your favourite file sharing website (it will be too big to upload here). Examples of services to upload to are FileDropper or One Drive or SendSpace. 5. Note: Send the downloadlink in a private message as the SOFTWARE hive contains sensitive information! Option#2 (only if you are unable to follow the previous instructions) Please download the Freeware RegBak from here: Acelogix Software - Download products You will find it at the bottom of the page that the link brings you to. Go ahead and install this program and accept all the defaults. After the last install screen the program should open. Click the New Backup button. Accept the defaults and simply click Start. When it says Finished successfully, click the Close button. This will bring you back to the main screen of the program. You will see one entry in this list with the date that you did it. Right-click on this line-item and select Explore Backup... This will bring you into the folder where the backup was made. You should see a Users folder and a Windows folder along with a couple other files. Double-click on the Windows folder to open it. Then open the System32 folder and then config folder. You should see around 6 files in here, one of which is named SOFTWARE. Copy the SOFTWARE file to your Desktop. If the SOFTWARE file does not exist, please fetch it instead from C:\Windows\System32\config\SOFTWARE. Now right-click on the SOFTWARE file that is on your desktop and select Send to > Compressed (zipped) folder. Then please upload the zip file (SOFTWARE.zip) to your favourite file sharing website (it will be too big to upload here). Examples of services to upload to are FileDropper or One Drive or SendSpace. Note: Send the downloadlink in a private message as the SOFTWARE hive contains sensitive information! You can close any open windows you have as well as the RegBak program now.
P PeterJ Moderator, Windows Update Expert, Security Analyst Staff member Joined Dec 14, 2014 Posts 12,616 May 25, 2020 #18 Remove Update Manually Click on the Start button and in the search box, type Command Prompt. When you see Command Prompt on the list, right-click on it and select Run as administrator. When command prompt opens, copy and paste the following command into it, then press enter. wusa /uninstall /KB:4524752 Let me know if it says it was successful or if there are any errors.
Remove Update Manually Click on the Start button and in the search box, type Command Prompt. When you see Command Prompt on the list, right-click on it and select Run as administrator. When command prompt opens, copy and paste the following command into it, then press enter. wusa /uninstall /KB:4524752 Let me know if it says it was successful or if there are any errors.
P PeterJ Moderator, Windows Update Expert, Security Analyst Staff member Joined Dec 14, 2014 Posts 12,616 May 26, 2020 #20 FRST Registry Search Click the Start button and choose Control Panel. In the upper right corner ensure the View by: is set to Category. Select the Programs group. Click the Turn Windows features on or off link. This will bring up the Server Manager dialog. Note: This loads your components hive which is what we want. Please keep this dialog open while you perform the remaining steps. You can minimize it if you wish but keep it open. Right-click on the file FRST64.exe and choose Run as administrator. Copy and paste KB4524752 into the Search box and click the Search Registry button. When the scan is complete, a message will display that 'SearchReg.txt' is saved in the same folder FRST was started from. Notepad will open this file also. Close Notepad and attach the file 'SearchReg.txt' to your next reply. You may close any remaining open windows now.
FRST Registry Search Click the Start button and choose Control Panel. In the upper right corner ensure the View by: is set to Category. Select the Programs group. Click the Turn Windows features on or off link. This will bring up the Server Manager dialog. Note: This loads your components hive which is what we want. Please keep this dialog open while you perform the remaining steps. You can minimize it if you wish but keep it open. Right-click on the file FRST64.exe and choose Run as administrator. Copy and paste KB4524752 into the Search box and click the Search Registry button. When the scan is complete, a message will display that 'SearchReg.txt' is saved in the same folder FRST was started from. Notepad will open this file also. Close Notepad and attach the file 'SearchReg.txt' to your next reply. You may close any remaining open windows now.