What's new

[SOLVED] [Win7SP1 64bit] Error 0x80070005 - Unable to install the monthly Quality Rollup

Visk

Member
Joined
Jan 8, 2019
Posts
7
Good evening everbody!

Here some background informations:
I do not remember when, but my Windows Updater refuse to update since few months. Interestingly only "Security Monthly Quality Rollup for Win7" and "Preview" of them are affected. Whenever I try to install them, it only reaches 15% during reboot, before I get "Failure configuring Windows 7 updates. Reverting changes."
I've tried few tips from other sites and of course the Windows Update Troubleshooter too. But without any success so far. A manual installation was also useless.


Thanks to this post I found this page. It's very similar to my problem. I've not tried BriansDrab solution on the second page yet, because "this fix is specific to the user in this thread". Nevertheless, since you folks found a fix for Nat I hope you can help me out too. Thank you in advance!
Since my CBS folder was too large, I uploaded it to WeTransfer.


Edit@:
Seems like this user has the same problem.

View attachment SFCFix.txt
 

softwaremaniac

Moderator, BSOD Kernel Dump Expert, Windows Update Instructor
Staff member
Joined
Oct 9, 2014
Posts
18,451
Location
Croatia
Hello and welcome! Please start by temporarily uninstalling your security software with its removal tool and retrying updates.
 

Visk

Member
Joined
Jan 8, 2019
Posts
7
Hey!
I only use Micrsoft Security Essentials as security software. As far as I know, this is the standard software. Can it be uninstalled at all?
 

softwaremaniac

Moderator, BSOD Kernel Dump Expert, Windows Update Instructor
Staff member
Joined
Oct 9, 2014
Posts
18,451
Location
Croatia
Can you please provide CBS.log and C:\Windows\Inf\setupapi.dev.log.
 

softwaremaniac

Moderator, BSOD Kernel Dump Expert, Windows Update Instructor
Staff member
Joined
Oct 9, 2014
Posts
18,451
Location
Croatia
It appears there is an error with your audio driver.

Code:
inf:                          ServiceBinary=C:\Windows\system32\drivers\HdAudio.sys  (hdaudio.inf line 86)
     inf:                          DisplayName="Microsoft 1.1 UAA-Funktionstreiber für High Definition Audio-Dienst"  (hdaudio.inf line 82)
!!!  dvi:                          Add Service: Failed to open service control manager.
!!!  inf:                     {Install Inf Section [HdAudModel.Services] exit(0x0000045b)}
!!!  dvi:                     Error while installing services.
!!!  dvi:                     Cleaning up failed installation
     dvi:                {Install DEVICE exit (0x0000045b)}
!!!  dvi:                Cleaning up failed installation (0000045b)
!!!  dvi:           Class installer: failed(0x0000045b)!
     dvi:           CoInstaller 1: Enter (Post Processing) 18:41:11.261
     dvi:           CoInstaller 1: Exit (Post Processing)
     dvi:      {DIF_INSTALLDEVICE - exit(0x0000045b)} 18:41:11.261
!!!  ndv:      Error(0000045b) installing device!
     ndv:      Device install status=0x0000045b
     ndv:      Performing device install final cleanup...
!    ndv:      Queueing up error report since device installation failed...
     ndv: {Core Device Install - exit(0x0000045b)} 18:41:11.261
     dvi: {DIF_DESTROYPRIVATEDATA} 18:41:11.261
     dvi:      CoInstaller 1: Enter 18:41:11.261
     dvi:      CoInstaller 1: Exit
     dvi:      Class installer: Enter 18:41:11.261
     dvi:      Class installer: Exit
     dvi:      Default installer: Enter 18:41:11.261
     dvi:      Default installer: Exit
     dvi: {DIF_DESTROYPRIVATEDATA - exit(0xe000020e)} 18:41:11.261
     ump: Server install process exited with code 0x0000045b 18:41:11.526
<<<  Section end 2019/01/11 18:41:11.526
<<<  [Exit status: FAILURE(0x0000045b
Try manually updating it through Device Manager.
 

softwaremaniac

Moderator, BSOD Kernel Dump Expert, Windows Update Instructor
Staff member
Joined
Oct 9, 2014
Posts
18,451
Location
Croatia
Step#1 - FRST Scan

1. Please download Farbar Recovery Scan Tool and save it to your Desktop.
Note: You need to run the 64-bit Version so please ensure you download that one.
2. Right click to run as administrator. When the tool opens click Yes to disclaimer.
3. Please ensure you place a check mark in the Addition.txt check box at the bottom of the form before running (if not already).
4. Press Scan button.
5. It will produce a log called FRST.txt in the same directory the tool is run from (which should now be the desktop)
6. Please attach the log back here.
7. Another log (Addition.txt - also located in the same directory as FRST64.exe) will be generated Please also attach that along with the FRST.txt in your reply.
 

softwaremaniac

Moderator, BSOD Kernel Dump Expert, Windows Update Instructor
Staff member
Joined
Oct 9, 2014
Posts
18,451
Location
Croatia
Step#1 - FRST Fix
NOTICE: This script was written specifically for this user, for use on that particular machine. Running this on another machine may cause damage to your operating system
1. Please download Farbar Recovery Scan Tool and save it to your Desktop.
Note: You need to run the 64-bit Version so please ensure you download that one.
2. Download attached file and save it to the Desktop.
Note. It's important that both files, FRST64 and fixlist.txt are in the same location or the fix will not work (in this case...the desktop).
3. Run FRST64 by Right-Clicking on the file and choosing Run as administrator.
4. Press the Fix button just once and wait. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
5. When finished FRST64 will generate a log on the Desktop (Fixlog.txt). Please post the contents of it in your reply.
6. Try updates and if any fail, attach CBS.log.
 

Attachments

Visk

Member
Joined
Jan 8, 2019
Posts
7
Respect. Everything worked out well.

Thank you very much for your effort!
 
Top